Class UpdateTableInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.table.service.rev131026.UpdateTableInputBuilder
-
@Generated("mdsal-binding-generator") public class UpdateTableInputBuilder extends Object
Class that buildsUpdateTableInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
UpdateTableInput createUpdateTableInput(int fooXyzzy, int barBaz) { return new UpdateTableInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of UpdateTableInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
UpdateTableInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description UpdateTableInputBuilder()
Construct an empty builder.UpdateTableInputBuilder(TransactionAware arg)
Construct a new builder initialized from specifiedTransactionAware
.UpdateTableInputBuilder(TransactionMetadata arg)
Construct a new builder initialized from specifiedTransactionMetadata
.UpdateTableInputBuilder(NodeContextRef arg)
Construct a new builder initialized from specifiedNodeContextRef
.UpdateTableInputBuilder(TableUpdate arg)
Construct a new builder initialized from specifiedTableUpdate
.UpdateTableInputBuilder(UpdateTableInput base)
Construct a builder initialized with state from specifiedUpdateTableInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description UpdateTableInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<UpdateTableInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<UpdateTableInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull UpdateTableInput
build()
A newUpdateTableInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.NodeRef
getNode()
Return current value associated with the property corresponding toNodeContextRef.getNode()
.OriginalTable
getOriginalTable()
Return current value associated with the property corresponding toTableUpdate.getOriginalTable()
.TableRef
getTableRef()
Return current value associated with the property corresponding toUpdateTableInput.getTableRef()
.TransactionId
getTransactionId()
Return current value associated with the property corresponding toTransactionAware.getTransactionId()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri
getTransactionUri()
Return current value associated with the property corresponding toTransactionMetadata.getTransactionUri()
.UpdatedTable
getUpdatedTable()
Return current value associated with the property corresponding toTableUpdate.getUpdatedTable()
.UpdateTableInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<UpdateTableInput>> augmentationType)
Remove an augmentation from this builder's product.UpdateTableInputBuilder
setNode(NodeRef value)
Set the property corresponding toNodeContextRef.getNode()
to the specified value.UpdateTableInputBuilder
setOriginalTable(OriginalTable value)
Set the property corresponding toTableUpdate.getOriginalTable()
to the specified value.UpdateTableInputBuilder
setTableRef(TableRef value)
Set the property corresponding toUpdateTableInput.getTableRef()
to the specified value.UpdateTableInputBuilder
setTransactionId(TransactionId value)
Set the property corresponding toTransactionAware.getTransactionId()
to the specified value.UpdateTableInputBuilder
setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
Set the property corresponding toTransactionMetadata.getTransactionUri()
to the specified value.UpdateTableInputBuilder
setUpdatedTable(UpdatedTable value)
Set the property corresponding toTableUpdate.getUpdatedTable()
to the specified value.
-
-
-
Constructor Detail
-
UpdateTableInputBuilder
public UpdateTableInputBuilder()
Construct an empty builder.
-
UpdateTableInputBuilder
public UpdateTableInputBuilder(TransactionMetadata arg)
Construct a new builder initialized from specifiedTransactionMetadata
.- Parameters:
arg
- TransactionMetadata from which the builder should be initialized
-
UpdateTableInputBuilder
public UpdateTableInputBuilder(TableUpdate arg)
Construct a new builder initialized from specifiedTableUpdate
.- Parameters:
arg
- TableUpdate from which the builder should be initialized
-
UpdateTableInputBuilder
public UpdateTableInputBuilder(NodeContextRef arg)
Construct a new builder initialized from specifiedNodeContextRef
.- Parameters:
arg
- NodeContextRef from which the builder should be initialized
-
UpdateTableInputBuilder
public UpdateTableInputBuilder(TransactionAware arg)
Construct a new builder initialized from specifiedTransactionAware
.- Parameters:
arg
- TransactionAware from which the builder should be initialized
-
UpdateTableInputBuilder
public UpdateTableInputBuilder(UpdateTableInput base)
Construct a builder initialized with state from specifiedUpdateTableInput
.- Parameters:
base
- UpdateTableInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getNode
public NodeRef getNode()
Return current value associated with the property corresponding toNodeContextRef.getNode()
.- Returns:
- current value
-
getOriginalTable
public OriginalTable getOriginalTable()
Return current value associated with the property corresponding toTableUpdate.getOriginalTable()
.- Returns:
- current value
-
getTableRef
public TableRef getTableRef()
Return current value associated with the property corresponding toUpdateTableInput.getTableRef()
.- Returns:
- current value
-
getTransactionId
public TransactionId getTransactionId()
Return current value associated with the property corresponding toTransactionAware.getTransactionId()
.- Returns:
- current value
-
getTransactionUri
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri getTransactionUri()
Return current value associated with the property corresponding toTransactionMetadata.getTransactionUri()
.- Returns:
- current value
-
getUpdatedTable
public UpdatedTable getUpdatedTable()
Return current value associated with the property corresponding toTableUpdate.getUpdatedTable()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<UpdateTableInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setNode
public UpdateTableInputBuilder setNode(NodeRef value)
Set the property corresponding toNodeContextRef.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOriginalTable
public UpdateTableInputBuilder setOriginalTable(OriginalTable value)
Set the property corresponding toTableUpdate.getOriginalTable()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTableRef
public UpdateTableInputBuilder setTableRef(TableRef value)
Set the property corresponding toUpdateTableInput.getTableRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTransactionId
public UpdateTableInputBuilder setTransactionId(TransactionId value)
Set the property corresponding toTransactionAware.getTransactionId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTransactionUri
public UpdateTableInputBuilder setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
Set the property corresponding toTransactionMetadata.getTransactionUri()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setUpdatedTable
public UpdateTableInputBuilder setUpdatedTable(UpdatedTable value)
Set the property corresponding toTableUpdate.getUpdatedTable()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public UpdateTableInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<UpdateTableInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public UpdateTableInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<UpdateTableInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull UpdateTableInput build()
A newUpdateTableInput
instance.- Returns:
- A new
UpdateTableInput
instance.
-
-