Class RemoveFlowCaseDataBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflowplugin.extension.onf.bundle.service.rev170124.bundle.inner.message.grouping.bundle.inner.message.bundle.remove.flow._case.RemoveFlowCaseDataBuilder
-
@Generated("mdsal-binding-generator") public class RemoveFlowCaseDataBuilder extends Object
Class that buildsRemoveFlowCaseData
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
RemoveFlowCaseData createRemoveFlowCaseData(int fooXyzzy, int barBaz) { return new RemoveFlowCaseDataBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of RemoveFlowCaseData, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
RemoveFlowCaseData
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description RemoveFlowCaseDataBuilder()
Construct an empty builder.RemoveFlowCaseDataBuilder(Flow arg)
Construct a new builder initialized from specifiedFlow
.RemoveFlowCaseDataBuilder(GenericFlowAttributes arg)
Construct a new builder initialized from specifiedGenericFlowAttributes
.RemoveFlowCaseDataBuilder(RemoveFlowCaseData base)
Construct a builder initialized with state from specifiedRemoveFlowCaseData
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description RemoveFlowCaseDataBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowCaseData> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowCaseData>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull RemoveFlowCaseData
build()
A newRemoveFlowCaseData
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getBarrier()
Return current value associated with the property corresponding toFlow.getBarrier()
.org.opendaylight.yangtools.yang.common.Uint32
getBufferId()
Return current value associated with the property corresponding toFlow.getBufferId()
.String
getContainerName()
Return current value associated with the property corresponding toFlow.getContainerName()
.FlowCookie
getCookie()
Return current value associated with the property corresponding toGenericFlowAttributes.getCookie()
.FlowCookie
getCookieMask()
Return current value associated with the property corresponding toFlow.getCookieMask()
.FlowModFlags
getFlags()
Return current value associated with the property corresponding toFlow.getFlags()
.String
getFlowName()
Return current value associated with the property corresponding toFlow.getFlowName()
.org.opendaylight.yangtools.yang.common.Uint16
getHardTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getHardTimeout()
.org.opendaylight.yangtools.yang.common.Uint16
getIdleTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getIdleTimeout()
.Boolean
getInstallHw()
Return current value associated with the property corresponding toFlow.getInstallHw()
.Instructions
getInstructions()
Return current value associated with the property corresponding toFlow.getInstructions()
.Match
getMatch()
Return current value associated with the property corresponding toFlow.getMatch()
.org.opendaylight.yangtools.yang.common.Uint32
getOutGroup()
Return current value associated with the property corresponding toFlow.getOutGroup()
.org.opendaylight.yangtools.yang.common.Uint64
getOutPort()
Return current value associated with the property corresponding toFlow.getOutPort()
.org.opendaylight.yangtools.yang.common.Uint16
getPriority()
Return current value associated with the property corresponding toGenericFlowAttributes.getPriority()
.Boolean
getStrict()
Return current value associated with the property corresponding toFlow.getStrict()
.org.opendaylight.yangtools.yang.common.Uint8
getTableId()
Return current value associated with the property corresponding toGenericFlowAttributes.getTableId()
.RemoveFlowCaseDataBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowCaseData>> augmentationType)
Remove an augmentation from this builder's product.RemoveFlowCaseDataBuilder
setBarrier(Boolean value)
Set the property corresponding toFlow.getBarrier()
to the specified value.RemoveFlowCaseDataBuilder
setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getBufferId()
to the specified value.RemoveFlowCaseDataBuilder
setContainerName(String value)
Set the property corresponding toFlow.getContainerName()
to the specified value.RemoveFlowCaseDataBuilder
setCookie(FlowCookie value)
Set the property corresponding toGenericFlowAttributes.getCookie()
to the specified value.RemoveFlowCaseDataBuilder
setCookieMask(FlowCookie value)
Set the property corresponding toFlow.getCookieMask()
to the specified value.RemoveFlowCaseDataBuilder
setFlags(FlowModFlags value)
Set the property corresponding toFlow.getFlags()
to the specified value.RemoveFlowCaseDataBuilder
setFlowName(String value)
Set the property corresponding toFlow.getFlowName()
to the specified value.RemoveFlowCaseDataBuilder
setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getHardTimeout()
to the specified value.RemoveFlowCaseDataBuilder
setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getIdleTimeout()
to the specified value.RemoveFlowCaseDataBuilder
setInstallHw(Boolean value)
Set the property corresponding toFlow.getInstallHw()
to the specified value.RemoveFlowCaseDataBuilder
setInstructions(Instructions value)
Set the property corresponding toFlow.getInstructions()
to the specified value.RemoveFlowCaseDataBuilder
setMatch(Match value)
Set the property corresponding toFlow.getMatch()
to the specified value.RemoveFlowCaseDataBuilder
setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getOutGroup()
to the specified value.RemoveFlowCaseDataBuilder
setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlow.getOutPort()
to the specified value.RemoveFlowCaseDataBuilder
setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getPriority()
to the specified value.RemoveFlowCaseDataBuilder
setStrict(Boolean value)
Set the property corresponding toFlow.getStrict()
to the specified value.RemoveFlowCaseDataBuilder
setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGenericFlowAttributes.getTableId()
to the specified value.
-
-
-
Constructor Detail
-
RemoveFlowCaseDataBuilder
public RemoveFlowCaseDataBuilder()
Construct an empty builder.
-
RemoveFlowCaseDataBuilder
public RemoveFlowCaseDataBuilder(Flow arg)
Construct a new builder initialized from specifiedFlow
.- Parameters:
arg
- Flow from which the builder should be initialized
-
RemoveFlowCaseDataBuilder
public RemoveFlowCaseDataBuilder(GenericFlowAttributes arg)
Construct a new builder initialized from specifiedGenericFlowAttributes
.- Parameters:
arg
- GenericFlowAttributes from which the builder should be initialized
-
RemoveFlowCaseDataBuilder
public RemoveFlowCaseDataBuilder(RemoveFlowCaseData base)
Construct a builder initialized with state from specifiedRemoveFlowCaseData
.- Parameters:
base
- RemoveFlowCaseData from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBarrier
public Boolean getBarrier()
Return current value associated with the property corresponding toFlow.getBarrier()
.- Returns:
- current value
-
getBufferId
public org.opendaylight.yangtools.yang.common.Uint32 getBufferId()
Return current value associated with the property corresponding toFlow.getBufferId()
.- Returns:
- current value
-
getContainerName
public String getContainerName()
Return current value associated with the property corresponding toFlow.getContainerName()
.- Returns:
- current value
-
getCookie
public FlowCookie getCookie()
Return current value associated with the property corresponding toGenericFlowAttributes.getCookie()
.- Returns:
- current value
-
getCookieMask
public FlowCookie getCookieMask()
Return current value associated with the property corresponding toFlow.getCookieMask()
.- Returns:
- current value
-
getFlags
public FlowModFlags getFlags()
Return current value associated with the property corresponding toFlow.getFlags()
.- Returns:
- current value
-
getFlowName
public String getFlowName()
Return current value associated with the property corresponding toFlow.getFlowName()
.- Returns:
- current value
-
getHardTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getHardTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getHardTimeout()
.- Returns:
- current value
-
getIdleTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getIdleTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getIdleTimeout()
.- Returns:
- current value
-
getInstallHw
public Boolean getInstallHw()
Return current value associated with the property corresponding toFlow.getInstallHw()
.- Returns:
- current value
-
getInstructions
public Instructions getInstructions()
Return current value associated with the property corresponding toFlow.getInstructions()
.- Returns:
- current value
-
getMatch
public Match getMatch()
Return current value associated with the property corresponding toFlow.getMatch()
.- Returns:
- current value
-
getOutGroup
public org.opendaylight.yangtools.yang.common.Uint32 getOutGroup()
Return current value associated with the property corresponding toFlow.getOutGroup()
.- Returns:
- current value
-
getOutPort
public org.opendaylight.yangtools.yang.common.Uint64 getOutPort()
Return current value associated with the property corresponding toFlow.getOutPort()
.- Returns:
- current value
-
getPriority
public org.opendaylight.yangtools.yang.common.Uint16 getPriority()
Return current value associated with the property corresponding toGenericFlowAttributes.getPriority()
.- Returns:
- current value
-
getStrict
public Boolean getStrict()
Return current value associated with the property corresponding toFlow.getStrict()
.- Returns:
- current value
-
getTableId
public org.opendaylight.yangtools.yang.common.Uint8 getTableId()
Return current value associated with the property corresponding toGenericFlowAttributes.getTableId()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowCaseData>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBarrier
public RemoveFlowCaseDataBuilder setBarrier(Boolean value)
Set the property corresponding toFlow.getBarrier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBufferId
public RemoveFlowCaseDataBuilder setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getBufferId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setContainerName
public RemoveFlowCaseDataBuilder setContainerName(String value)
Set the property corresponding toFlow.getContainerName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookie
public RemoveFlowCaseDataBuilder setCookie(FlowCookie value)
Set the property corresponding toGenericFlowAttributes.getCookie()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookieMask
public RemoveFlowCaseDataBuilder setCookieMask(FlowCookie value)
Set the property corresponding toFlow.getCookieMask()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlags
public RemoveFlowCaseDataBuilder setFlags(FlowModFlags value)
Set the property corresponding toFlow.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowName
public RemoveFlowCaseDataBuilder setFlowName(String value)
Set the property corresponding toFlow.getFlowName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHardTimeout
public RemoveFlowCaseDataBuilder setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getHardTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIdleTimeout
public RemoveFlowCaseDataBuilder setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getIdleTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstallHw
public RemoveFlowCaseDataBuilder setInstallHw(Boolean value)
Set the property corresponding toFlow.getInstallHw()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstructions
public RemoveFlowCaseDataBuilder setInstructions(Instructions value)
Set the property corresponding toFlow.getInstructions()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMatch
public RemoveFlowCaseDataBuilder setMatch(Match value)
Set the property corresponding toFlow.getMatch()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutGroup
public RemoveFlowCaseDataBuilder setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getOutGroup()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutPort
public RemoveFlowCaseDataBuilder setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlow.getOutPort()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPriority
public RemoveFlowCaseDataBuilder setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setStrict
public RemoveFlowCaseDataBuilder setStrict(Boolean value)
Set the property corresponding toFlow.getStrict()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTableId
public RemoveFlowCaseDataBuilder setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGenericFlowAttributes.getTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public RemoveFlowCaseDataBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowCaseData> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public RemoveFlowCaseDataBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowCaseData>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull RemoveFlowCaseData build()
A newRemoveFlowCaseData
instance.- Returns:
- A new
RemoveFlowCaseData
instance.
-
-