Class PortModInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflow.protocol.rev130731.PortModInputBuilder
-
@Generated("mdsal-binding-generator") public class PortModInputBuilder extends Object
Class that buildsPortModInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
PortModInput createPortModInput(int fooXyzzy, int barBaz) { return new PortModInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of PortModInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
PortModInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description PortModInputBuilder()
Construct an empty builder.PortModInputBuilder(OfHeader arg)
Construct a new builder initialized from specifiedOfHeader
.PortModInputBuilder(PortMod$G arg)
Construct a new builder initialized from specifiedPortMod$G
.PortModInputBuilder(PortModInput base)
Construct a builder initialized with state from specifiedPortModInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description PortModInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PortModInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PortModInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull PortModInput
build()
A newPortModInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.PortFeatures
getAdvertise()
Return current value associated with the property corresponding toPortMod$G.getAdvertise()
.PortFeaturesV10
getAdvertiseV10()
Return current value associated with the property corresponding toPortMod$G.getAdvertiseV10()
.PortConfig
getConfig()
Return current value associated with the property corresponding toPortMod$G.getConfig()
.PortConfigV10
getConfigV10()
Return current value associated with the property corresponding toPortMod$G.getConfigV10()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress
getHwAddress()
Return current value associated with the property corresponding toPortMod$G.getHwAddress()
.PortConfig
getMask()
Return current value associated with the property corresponding toPortMod$G.getMask()
.PortConfigV10
getMaskV10()
Return current value associated with the property corresponding toPortMod$G.getMaskV10()
.PortNumber
getPortNo()
Return current value associated with the property corresponding toPortMod$G.getPortNo()
.org.opendaylight.yangtools.yang.common.Uint8
getVersion()
Return current value associated with the property corresponding toOfHeader.getVersion()
.org.opendaylight.yangtools.yang.common.Uint32
getXid()
Return current value associated with the property corresponding toOfHeader.getXid()
.PortModInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PortModInput>> augmentationType)
Remove an augmentation from this builder's product.PortModInputBuilder
setAdvertise(PortFeatures value)
Set the property corresponding toPortMod$G.getAdvertise()
to the specified value.PortModInputBuilder
setAdvertiseV10(PortFeaturesV10 value)
Set the property corresponding toPortMod$G.getAdvertiseV10()
to the specified value.PortModInputBuilder
setConfig(PortConfig value)
Set the property corresponding toPortMod$G.getConfig()
to the specified value.PortModInputBuilder
setConfigV10(PortConfigV10 value)
Set the property corresponding toPortMod$G.getConfigV10()
to the specified value.PortModInputBuilder
setHwAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
Set the property corresponding toPortMod$G.getHwAddress()
to the specified value.PortModInputBuilder
setMask(PortConfig value)
Set the property corresponding toPortMod$G.getMask()
to the specified value.PortModInputBuilder
setMaskV10(PortConfigV10 value)
Set the property corresponding toPortMod$G.getMaskV10()
to the specified value.PortModInputBuilder
setPortNo(PortNumber value)
Set the property corresponding toPortMod$G.getPortNo()
to the specified value.PortModInputBuilder
setVersion(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toOfHeader.getVersion()
to the specified value.PortModInputBuilder
setXid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toOfHeader.getXid()
to the specified value.
-
-
-
Constructor Detail
-
PortModInputBuilder
public PortModInputBuilder()
Construct an empty builder.
-
PortModInputBuilder
public PortModInputBuilder(PortMod$G arg)
Construct a new builder initialized from specifiedPortMod$G
.- Parameters:
arg
- PortMod$G from which the builder should be initialized
-
PortModInputBuilder
public PortModInputBuilder(OfHeader arg)
Construct a new builder initialized from specifiedOfHeader
.- Parameters:
arg
- OfHeader from which the builder should be initialized
-
PortModInputBuilder
public PortModInputBuilder(PortModInput base)
Construct a builder initialized with state from specifiedPortModInput
.- Parameters:
base
- PortModInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAdvertise
public PortFeatures getAdvertise()
Return current value associated with the property corresponding toPortMod$G.getAdvertise()
.- Returns:
- current value
-
getAdvertiseV10
public PortFeaturesV10 getAdvertiseV10()
Return current value associated with the property corresponding toPortMod$G.getAdvertiseV10()
.- Returns:
- current value
-
getConfig
public PortConfig getConfig()
Return current value associated with the property corresponding toPortMod$G.getConfig()
.- Returns:
- current value
-
getConfigV10
public PortConfigV10 getConfigV10()
Return current value associated with the property corresponding toPortMod$G.getConfigV10()
.- Returns:
- current value
-
getHwAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getHwAddress()
Return current value associated with the property corresponding toPortMod$G.getHwAddress()
.- Returns:
- current value
-
getMask
public PortConfig getMask()
Return current value associated with the property corresponding toPortMod$G.getMask()
.- Returns:
- current value
-
getMaskV10
public PortConfigV10 getMaskV10()
Return current value associated with the property corresponding toPortMod$G.getMaskV10()
.- Returns:
- current value
-
getPortNo
public PortNumber getPortNo()
Return current value associated with the property corresponding toPortMod$G.getPortNo()
.- Returns:
- current value
-
getVersion
public org.opendaylight.yangtools.yang.common.Uint8 getVersion()
Return current value associated with the property corresponding toOfHeader.getVersion()
.- Returns:
- current value
-
getXid
public org.opendaylight.yangtools.yang.common.Uint32 getXid()
Return current value associated with the property corresponding toOfHeader.getXid()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PortModInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAdvertise
public PortModInputBuilder setAdvertise(PortFeatures value)
Set the property corresponding toPortMod$G.getAdvertise()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setAdvertiseV10
public PortModInputBuilder setAdvertiseV10(PortFeaturesV10 value)
Set the property corresponding toPortMod$G.getAdvertiseV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setConfig
public PortModInputBuilder setConfig(PortConfig value)
Set the property corresponding toPortMod$G.getConfig()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setConfigV10
public PortModInputBuilder setConfigV10(PortConfigV10 value)
Set the property corresponding toPortMod$G.getConfigV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHwAddress
public PortModInputBuilder setHwAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
Set the property corresponding toPortMod$G.getHwAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMask
public PortModInputBuilder setMask(PortConfig value)
Set the property corresponding toPortMod$G.getMask()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaskV10
public PortModInputBuilder setMaskV10(PortConfigV10 value)
Set the property corresponding toPortMod$G.getMaskV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPortNo
public PortModInputBuilder setPortNo(PortNumber value)
Set the property corresponding toPortMod$G.getPortNo()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setVersion
public PortModInputBuilder setVersion(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toOfHeader.getVersion()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setXid
public PortModInputBuilder setXid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toOfHeader.getXid()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public PortModInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PortModInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public PortModInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PortModInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull PortModInput build()
A newPortModInput
instance.- Returns:
- A new
PortModInput
instance.
-
-