Class FlowModInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflow.protocol.rev130731.FlowModInputBuilder
-
@Generated("mdsal-binding-generator") public class FlowModInputBuilder extends Object
Class that buildsFlowModInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
FlowModInput createFlowModInput(int fooXyzzy, int barBaz) { return new FlowModInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of FlowModInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
FlowModInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description FlowModInputBuilder()
Construct an empty builder.FlowModInputBuilder(ActionsGrouping arg)
Construct a new builder initialized from specifiedActionsGrouping
.FlowModInputBuilder(InstructionsGrouping arg)
Construct a new builder initialized from specifiedInstructionsGrouping
.FlowModInputBuilder(MatchGrouping arg)
Construct a new builder initialized from specifiedMatchGrouping
.FlowModInputBuilder(MatchV10Grouping arg)
Construct a new builder initialized from specifiedMatchV10Grouping
.FlowModInputBuilder(FlowMod$G arg)
Construct a new builder initialized from specifiedFlowMod$G
.FlowModInputBuilder(FlowModInput base)
Construct a builder initialized with state from specifiedFlowModInput
.FlowModInputBuilder(OfHeader arg)
Construct a new builder initialized from specifiedOfHeader
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description FlowModInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowModInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowModInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull FlowModInput
build()
A newFlowModInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.List<Action>
getAction()
Return current value associated with the property corresponding toActionsGrouping.getAction()
.org.opendaylight.yangtools.yang.common.Uint32
getBufferId()
Return current value associated with the property corresponding toFlowMod$G.getBufferId()
.FlowModCommand
getCommand()
Return current value associated with the property corresponding toFlowMod$G.getCommand()
.org.opendaylight.yangtools.yang.common.Uint64
getCookie()
Return current value associated with the property corresponding toFlowMod$G.getCookie()
.org.opendaylight.yangtools.yang.common.Uint64
getCookieMask()
Return current value associated with the property corresponding toFlowMod$G.getCookieMask()
.FlowModFlags
getFlags()
Return current value associated with the property corresponding toFlowMod$G.getFlags()
.FlowModFlagsV10
getFlagsV10()
Return current value associated with the property corresponding toFlowMod$G.getFlagsV10()
.org.opendaylight.yangtools.yang.common.Uint16
getHardTimeout()
Return current value associated with the property corresponding toFlowMod$G.getHardTimeout()
.org.opendaylight.yangtools.yang.common.Uint16
getIdleTimeout()
Return current value associated with the property corresponding toFlowMod$G.getIdleTimeout()
.List<Instruction>
getInstruction()
Return current value associated with the property corresponding toInstructionsGrouping.getInstruction()
.Match
getMatch()
Return current value associated with the property corresponding toMatchGrouping.getMatch()
.MatchV10
getMatchV10()
Return current value associated with the property corresponding toMatchV10Grouping.getMatchV10()
.org.opendaylight.yangtools.yang.common.Uint32
getOutGroup()
Return current value associated with the property corresponding toFlowMod$G.getOutGroup()
.PortNumber
getOutPort()
Return current value associated with the property corresponding toFlowMod$G.getOutPort()
.org.opendaylight.yangtools.yang.common.Uint16
getPriority()
Return current value associated with the property corresponding toFlowMod$G.getPriority()
.TableId
getTableId()
Return current value associated with the property corresponding toFlowMod$G.getTableId()
.org.opendaylight.yangtools.yang.common.Uint8
getVersion()
Return current value associated with the property corresponding toOfHeader.getVersion()
.org.opendaylight.yangtools.yang.common.Uint32
getXid()
Return current value associated with the property corresponding toOfHeader.getXid()
.FlowModInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowModInput>> augmentationType)
Remove an augmentation from this builder's product.FlowModInputBuilder
setAction(List<Action> values)
Set the property corresponding toActionsGrouping.getAction()
to the specified value.FlowModInputBuilder
setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowMod$G.getBufferId()
to the specified value.FlowModInputBuilder
setCommand(FlowModCommand value)
Set the property corresponding toFlowMod$G.getCommand()
to the specified value.FlowModInputBuilder
setCookie(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlowMod$G.getCookie()
to the specified value.FlowModInputBuilder
setCookieMask(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlowMod$G.getCookieMask()
to the specified value.FlowModInputBuilder
setFlags(FlowModFlags value)
Set the property corresponding toFlowMod$G.getFlags()
to the specified value.FlowModInputBuilder
setFlagsV10(FlowModFlagsV10 value)
Set the property corresponding toFlowMod$G.getFlagsV10()
to the specified value.FlowModInputBuilder
setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toFlowMod$G.getHardTimeout()
to the specified value.FlowModInputBuilder
setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toFlowMod$G.getIdleTimeout()
to the specified value.FlowModInputBuilder
setInstruction(List<Instruction> values)
Set the property corresponding toInstructionsGrouping.getInstruction()
to the specified value.FlowModInputBuilder
setMatch(Match value)
Set the property corresponding toMatchGrouping.getMatch()
to the specified value.FlowModInputBuilder
setMatchV10(MatchV10 value)
Set the property corresponding toMatchV10Grouping.getMatchV10()
to the specified value.FlowModInputBuilder
setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowMod$G.getOutGroup()
to the specified value.FlowModInputBuilder
setOutPort(PortNumber value)
Set the property corresponding toFlowMod$G.getOutPort()
to the specified value.FlowModInputBuilder
setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toFlowMod$G.getPriority()
to the specified value.FlowModInputBuilder
setTableId(TableId value)
Set the property corresponding toFlowMod$G.getTableId()
to the specified value.FlowModInputBuilder
setVersion(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toOfHeader.getVersion()
to the specified value.FlowModInputBuilder
setXid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toOfHeader.getXid()
to the specified value.
-
-
-
Constructor Detail
-
FlowModInputBuilder
public FlowModInputBuilder()
Construct an empty builder.
-
FlowModInputBuilder
public FlowModInputBuilder(FlowMod$G arg)
Construct a new builder initialized from specifiedFlowMod$G
.- Parameters:
arg
- FlowMod$G from which the builder should be initialized
-
FlowModInputBuilder
public FlowModInputBuilder(OfHeader arg)
Construct a new builder initialized from specifiedOfHeader
.- Parameters:
arg
- OfHeader from which the builder should be initialized
-
FlowModInputBuilder
public FlowModInputBuilder(MatchGrouping arg)
Construct a new builder initialized from specifiedMatchGrouping
.- Parameters:
arg
- MatchGrouping from which the builder should be initialized
-
FlowModInputBuilder
public FlowModInputBuilder(InstructionsGrouping arg)
Construct a new builder initialized from specifiedInstructionsGrouping
.- Parameters:
arg
- InstructionsGrouping from which the builder should be initialized
-
FlowModInputBuilder
public FlowModInputBuilder(MatchV10Grouping arg)
Construct a new builder initialized from specifiedMatchV10Grouping
.- Parameters:
arg
- MatchV10Grouping from which the builder should be initialized
-
FlowModInputBuilder
public FlowModInputBuilder(ActionsGrouping arg)
Construct a new builder initialized from specifiedActionsGrouping
.- Parameters:
arg
- ActionsGrouping from which the builder should be initialized
-
FlowModInputBuilder
public FlowModInputBuilder(FlowModInput base)
Construct a builder initialized with state from specifiedFlowModInput
.- Parameters:
base
- FlowModInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAction
public List<Action> getAction()
Return current value associated with the property corresponding toActionsGrouping.getAction()
.- Returns:
- current value
-
getBufferId
public org.opendaylight.yangtools.yang.common.Uint32 getBufferId()
Return current value associated with the property corresponding toFlowMod$G.getBufferId()
.- Returns:
- current value
-
getCommand
public FlowModCommand getCommand()
Return current value associated with the property corresponding toFlowMod$G.getCommand()
.- Returns:
- current value
-
getCookie
public org.opendaylight.yangtools.yang.common.Uint64 getCookie()
Return current value associated with the property corresponding toFlowMod$G.getCookie()
.- Returns:
- current value
-
getCookieMask
public org.opendaylight.yangtools.yang.common.Uint64 getCookieMask()
Return current value associated with the property corresponding toFlowMod$G.getCookieMask()
.- Returns:
- current value
-
getFlags
public FlowModFlags getFlags()
Return current value associated with the property corresponding toFlowMod$G.getFlags()
.- Returns:
- current value
-
getFlagsV10
public FlowModFlagsV10 getFlagsV10()
Return current value associated with the property corresponding toFlowMod$G.getFlagsV10()
.- Returns:
- current value
-
getHardTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getHardTimeout()
Return current value associated with the property corresponding toFlowMod$G.getHardTimeout()
.- Returns:
- current value
-
getIdleTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getIdleTimeout()
Return current value associated with the property corresponding toFlowMod$G.getIdleTimeout()
.- Returns:
- current value
-
getInstruction
public List<Instruction> getInstruction()
Return current value associated with the property corresponding toInstructionsGrouping.getInstruction()
.- Returns:
- current value
-
getMatch
public Match getMatch()
Return current value associated with the property corresponding toMatchGrouping.getMatch()
.- Returns:
- current value
-
getMatchV10
public MatchV10 getMatchV10()
Return current value associated with the property corresponding toMatchV10Grouping.getMatchV10()
.- Returns:
- current value
-
getOutGroup
public org.opendaylight.yangtools.yang.common.Uint32 getOutGroup()
Return current value associated with the property corresponding toFlowMod$G.getOutGroup()
.- Returns:
- current value
-
getOutPort
public PortNumber getOutPort()
Return current value associated with the property corresponding toFlowMod$G.getOutPort()
.- Returns:
- current value
-
getPriority
public org.opendaylight.yangtools.yang.common.Uint16 getPriority()
Return current value associated with the property corresponding toFlowMod$G.getPriority()
.- Returns:
- current value
-
getTableId
public TableId getTableId()
Return current value associated with the property corresponding toFlowMod$G.getTableId()
.- Returns:
- current value
-
getVersion
public org.opendaylight.yangtools.yang.common.Uint8 getVersion()
Return current value associated with the property corresponding toOfHeader.getVersion()
.- Returns:
- current value
-
getXid
public org.opendaylight.yangtools.yang.common.Uint32 getXid()
Return current value associated with the property corresponding toOfHeader.getXid()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowModInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAction
public FlowModInputBuilder setAction(List<Action> values)
Set the property corresponding toActionsGrouping.getAction()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setBufferId
public FlowModInputBuilder setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowMod$G.getBufferId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCommand
public FlowModInputBuilder setCommand(FlowModCommand value)
Set the property corresponding toFlowMod$G.getCommand()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookie
public FlowModInputBuilder setCookie(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlowMod$G.getCookie()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookieMask
public FlowModInputBuilder setCookieMask(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlowMod$G.getCookieMask()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlags
public FlowModInputBuilder setFlags(FlowModFlags value)
Set the property corresponding toFlowMod$G.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlagsV10
public FlowModInputBuilder setFlagsV10(FlowModFlagsV10 value)
Set the property corresponding toFlowMod$G.getFlagsV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHardTimeout
public FlowModInputBuilder setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toFlowMod$G.getHardTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIdleTimeout
public FlowModInputBuilder setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toFlowMod$G.getIdleTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstruction
public FlowModInputBuilder setInstruction(List<Instruction> values)
Set the property corresponding toInstructionsGrouping.getInstruction()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setMatch
public FlowModInputBuilder setMatch(Match value)
Set the property corresponding toMatchGrouping.getMatch()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMatchV10
public FlowModInputBuilder setMatchV10(MatchV10 value)
Set the property corresponding toMatchV10Grouping.getMatchV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutGroup
public FlowModInputBuilder setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowMod$G.getOutGroup()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutPort
public FlowModInputBuilder setOutPort(PortNumber value)
Set the property corresponding toFlowMod$G.getOutPort()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPriority
public FlowModInputBuilder setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toFlowMod$G.getPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTableId
public FlowModInputBuilder setTableId(TableId value)
Set the property corresponding toFlowMod$G.getTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setVersion
public FlowModInputBuilder setVersion(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toOfHeader.getVersion()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setXid
public FlowModInputBuilder setXid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toOfHeader.getXid()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public FlowModInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowModInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public FlowModInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowModInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull FlowModInput build()
A newFlowModInput
instance.- Returns:
- A new
FlowModInput
instance.
-
-