Package org.opendaylight.yang.gen.v1.urn.opendaylight.model.match.types.rev131026.match.layer._3.match
Class TunnelIpv4MatchBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.model.match.types.rev131026.match.layer._3.match.TunnelIpv4MatchBuilder
-
@Generated("mdsal-binding-generator") public class TunnelIpv4MatchBuilder extends Object
Class that buildsTunnelIpv4Match
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
TunnelIpv4Match createTunnelIpv4Match(int fooXyzzy, int barBaz) { return new TunnelIpv4MatchBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of TunnelIpv4Match, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
TunnelIpv4Match
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description TunnelIpv4MatchBuilder()
Construct an empty builder.TunnelIpv4MatchBuilder(TunnelIpv4Match base)
Construct a builder initialized with state from specifiedTunnelIpv4Match
.TunnelIpv4MatchBuilder(TunnelIpv4MatchFields arg)
Construct a new builder initialized from specifiedTunnelIpv4MatchFields
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description TunnelIpv4MatchBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<TunnelIpv4Match> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<TunnelIpv4Match>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull TunnelIpv4Match
build()
A newTunnelIpv4Match
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix
getTunnelIpv4Destination()
Return current value associated with the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Destination()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix
getTunnelIpv4Source()
Return current value associated with the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Source()
.TunnelIpv4MatchBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<TunnelIpv4Match>> augmentationType)
Remove an augmentation from this builder's product.TunnelIpv4MatchBuilder
setTunnelIpv4Destination(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix value)
Set the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Destination()
to the specified value.TunnelIpv4MatchBuilder
setTunnelIpv4Source(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix value)
Set the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Source()
to the specified value.
-
-
-
Constructor Detail
-
TunnelIpv4MatchBuilder
public TunnelIpv4MatchBuilder()
Construct an empty builder.
-
TunnelIpv4MatchBuilder
public TunnelIpv4MatchBuilder(TunnelIpv4MatchFields arg)
Construct a new builder initialized from specifiedTunnelIpv4MatchFields
.- Parameters:
arg
- TunnelIpv4MatchFields from which the builder should be initialized
-
TunnelIpv4MatchBuilder
public TunnelIpv4MatchBuilder(TunnelIpv4Match base)
Construct a builder initialized with state from specifiedTunnelIpv4Match
.- Parameters:
base
- TunnelIpv4Match from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getTunnelIpv4Destination
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix getTunnelIpv4Destination()
Return current value associated with the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Destination()
.- Returns:
- current value
-
getTunnelIpv4Source
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix getTunnelIpv4Source()
Return current value associated with the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Source()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<TunnelIpv4Match>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setTunnelIpv4Destination
public TunnelIpv4MatchBuilder setTunnelIpv4Destination(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix value)
Set the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Destination()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTunnelIpv4Source
public TunnelIpv4MatchBuilder setTunnelIpv4Source(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix value)
Set the property corresponding toTunnelIpv4MatchFields.getTunnelIpv4Source()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public TunnelIpv4MatchBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<TunnelIpv4Match> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public TunnelIpv4MatchBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<TunnelIpv4Match>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull TunnelIpv4Match build()
A newTunnelIpv4Match
instance.- Returns:
- A new
TunnelIpv4Match
instance.
-
-