Class MeterFeaturesUpdatedBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.meter.statistics.rev131111.MeterFeaturesUpdatedBuilder
-
@Generated("mdsal-binding-generator") public class MeterFeaturesUpdatedBuilder extends Object
Class that buildsMeterFeaturesUpdated
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
MeterFeaturesUpdated createMeterFeaturesUpdated(int fooXyzzy, int barBaz) { return new MeterFeaturesUpdatedBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of MeterFeaturesUpdated, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
MeterFeaturesUpdated
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description MeterFeaturesUpdatedBuilder()
Construct an empty builder.MeterFeaturesUpdatedBuilder(MultipartTransactionAware arg)
Construct a new builder initialized from specifiedMultipartTransactionAware
.MeterFeaturesUpdatedBuilder(TransactionAware arg)
Construct a new builder initialized from specifiedTransactionAware
.MeterFeaturesUpdatedBuilder(Node arg)
Construct a new builder initialized from specifiedNode
.MeterFeaturesUpdatedBuilder(MeterFeaturesUpdated base)
Construct a builder initialized with state from specifiedMeterFeaturesUpdated
.MeterFeaturesUpdatedBuilder(MeterFeatures arg)
Construct a new builder initialized from specifiedMeterFeatures
.MeterFeaturesUpdatedBuilder(MeterFeaturesReply arg)
Construct a new builder initialized from specifiedMeterFeaturesReply
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description MeterFeaturesUpdatedBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<MeterFeaturesUpdated> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<MeterFeaturesUpdated>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull MeterFeaturesUpdated
build()
A newMeterFeaturesUpdated
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.NodeId
getId()
Return current value associated with the property corresponding toNode.getId()
.org.opendaylight.yangtools.yang.common.Uint8
getMaxBands()
Return current value associated with the property corresponding toMeterFeatures.getMaxBands()
.org.opendaylight.yangtools.yang.common.Uint8
getMaxColor()
Return current value associated with the property corresponding toMeterFeatures.getMaxColor()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.Counter32
getMaxMeter()
Return current value associated with the property corresponding toMeterFeatures.getMaxMeter()
.Set<Class<? extends MeterBand>>
getMeterBandSupported()
Return current value associated with the property corresponding toMeterFeatures.getMeterBandSupported()
.Set<Class<? extends MeterCapability>>
getMeterCapabilitiesSupported()
Return current value associated with the property corresponding toMeterFeatures.getMeterCapabilitiesSupported()
.Boolean
getMoreReplies()
Return current value associated with the property corresponding toMultipartTransactionAware.getMoreReplies()
.Map<NodeConnectorKey,NodeConnector>
getNodeConnector()
Return current value associated with the property corresponding toNode.getNodeConnector()
.TransactionId
getTransactionId()
Return current value associated with the property corresponding toTransactionAware.getTransactionId()
.MeterFeaturesUpdatedBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<MeterFeaturesUpdated>> augmentationType)
Remove an augmentation from this builder's product.MeterFeaturesUpdatedBuilder
setId(NodeId value)
Set the property corresponding toNode.getId()
to the specified value.MeterFeaturesUpdatedBuilder
setMaxBands(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toMeterFeatures.getMaxBands()
to the specified value.MeterFeaturesUpdatedBuilder
setMaxColor(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toMeterFeatures.getMaxColor()
to the specified value.MeterFeaturesUpdatedBuilder
setMaxMeter(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.Counter32 value)
Set the property corresponding toMeterFeatures.getMaxMeter()
to the specified value.MeterFeaturesUpdatedBuilder
setMeterBandSupported(Set<Class<? extends MeterBand>> values)
Set the property corresponding toMeterFeatures.getMeterBandSupported()
to the specified value.MeterFeaturesUpdatedBuilder
setMeterCapabilitiesSupported(Set<Class<? extends MeterCapability>> values)
Set the property corresponding toMeterFeatures.getMeterCapabilitiesSupported()
to the specified value.MeterFeaturesUpdatedBuilder
setMoreReplies(Boolean value)
Set the property corresponding toMultipartTransactionAware.getMoreReplies()
to the specified value.MeterFeaturesUpdatedBuilder
setNodeConnector(Map<NodeConnectorKey,NodeConnector> values)
Set the property corresponding toNode.getNodeConnector()
to the specified value.MeterFeaturesUpdatedBuilder
setTransactionId(TransactionId value)
Set the property corresponding toTransactionAware.getTransactionId()
to the specified value.
-
-
-
Constructor Detail
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder()
Construct an empty builder.
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder(Node arg)
Construct a new builder initialized from specifiedNode
.- Parameters:
arg
- Node from which the builder should be initialized
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder(MeterFeaturesReply arg)
Construct a new builder initialized from specifiedMeterFeaturesReply
.- Parameters:
arg
- MeterFeaturesReply from which the builder should be initialized
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder(MeterFeatures arg)
Construct a new builder initialized from specifiedMeterFeatures
.- Parameters:
arg
- MeterFeatures from which the builder should be initialized
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder(MultipartTransactionAware arg)
Construct a new builder initialized from specifiedMultipartTransactionAware
.- Parameters:
arg
- MultipartTransactionAware from which the builder should be initialized
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder(TransactionAware arg)
Construct a new builder initialized from specifiedTransactionAware
.- Parameters:
arg
- TransactionAware from which the builder should be initialized
-
MeterFeaturesUpdatedBuilder
public MeterFeaturesUpdatedBuilder(MeterFeaturesUpdated base)
Construct a builder initialized with state from specifiedMeterFeaturesUpdated
.- Parameters:
base
- MeterFeaturesUpdated from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getId
public NodeId getId()
Return current value associated with the property corresponding toNode.getId()
.- Returns:
- current value
-
getMaxBands
public org.opendaylight.yangtools.yang.common.Uint8 getMaxBands()
Return current value associated with the property corresponding toMeterFeatures.getMaxBands()
.- Returns:
- current value
-
getMaxColor
public org.opendaylight.yangtools.yang.common.Uint8 getMaxColor()
Return current value associated with the property corresponding toMeterFeatures.getMaxColor()
.- Returns:
- current value
-
getMaxMeter
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.Counter32 getMaxMeter()
Return current value associated with the property corresponding toMeterFeatures.getMaxMeter()
.- Returns:
- current value
-
getMeterBandSupported
public Set<Class<? extends MeterBand>> getMeterBandSupported()
Return current value associated with the property corresponding toMeterFeatures.getMeterBandSupported()
.- Returns:
- current value
-
getMeterCapabilitiesSupported
public Set<Class<? extends MeterCapability>> getMeterCapabilitiesSupported()
Return current value associated with the property corresponding toMeterFeatures.getMeterCapabilitiesSupported()
.- Returns:
- current value
-
getMoreReplies
public Boolean getMoreReplies()
Return current value associated with the property corresponding toMultipartTransactionAware.getMoreReplies()
.- Returns:
- current value
-
getNodeConnector
public Map<NodeConnectorKey,NodeConnector> getNodeConnector()
Return current value associated with the property corresponding toNode.getNodeConnector()
.- Returns:
- current value
-
getTransactionId
public TransactionId getTransactionId()
Return current value associated with the property corresponding toTransactionAware.getTransactionId()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<MeterFeaturesUpdated>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setId
public MeterFeaturesUpdatedBuilder setId(NodeId value)
Set the property corresponding toNode.getId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxBands
public MeterFeaturesUpdatedBuilder setMaxBands(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toMeterFeatures.getMaxBands()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxColor
public MeterFeaturesUpdatedBuilder setMaxColor(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toMeterFeatures.getMaxColor()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxMeter
public MeterFeaturesUpdatedBuilder setMaxMeter(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.Counter32 value)
Set the property corresponding toMeterFeatures.getMaxMeter()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterBandSupported
public MeterFeaturesUpdatedBuilder setMeterBandSupported(Set<Class<? extends MeterBand>> values)
Set the property corresponding toMeterFeatures.getMeterBandSupported()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setMeterCapabilitiesSupported
public MeterFeaturesUpdatedBuilder setMeterCapabilitiesSupported(Set<Class<? extends MeterCapability>> values)
Set the property corresponding toMeterFeatures.getMeterCapabilitiesSupported()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setMoreReplies
public MeterFeaturesUpdatedBuilder setMoreReplies(Boolean value)
Set the property corresponding toMultipartTransactionAware.getMoreReplies()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNodeConnector
public MeterFeaturesUpdatedBuilder setNodeConnector(Map<NodeConnectorKey,NodeConnector> values)
Set the property corresponding toNode.getNodeConnector()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setTransactionId
public MeterFeaturesUpdatedBuilder setTransactionId(TransactionId value)
Set the property corresponding toTransactionAware.getTransactionId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public MeterFeaturesUpdatedBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<MeterFeaturesUpdated> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public MeterFeaturesUpdatedBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<MeterFeaturesUpdated>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull MeterFeaturesUpdated build()
A newMeterFeaturesUpdated
instance.- Returns:
- A new
MeterFeaturesUpdated
instance.
-
-