Class AddMeterInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.meter.service.rev130918.AddMeterInputBuilder
-
@Generated("mdsal-binding-generator") public class AddMeterInputBuilder extends Object
Class that buildsAddMeterInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
AddMeterInput createAddMeterInput(int fooXyzzy, int barBaz) { return new AddMeterInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of AddMeterInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
AddMeterInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description AddMeterInputBuilder()
Construct an empty builder.AddMeterInputBuilder(TransactionMetadata arg)
Construct a new builder initialized from specifiedTransactionMetadata
.AddMeterInputBuilder(NodeContextRef arg)
Construct a new builder initialized from specifiedNodeContextRef
.AddMeterInputBuilder(AddMeterInput base)
Construct a builder initialized with state from specifiedAddMeterInput
.AddMeterInputBuilder(NodeMeter arg)
Construct a new builder initialized from specifiedNodeMeter
.AddMeterInputBuilder(Meter arg)
Construct a new builder initialized from specifiedMeter
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description AddMeterInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddMeterInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddMeterInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull AddMeterInput
build()
A newAddMeterInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getBarrier()
Return current value associated with the property corresponding toMeter.getBarrier()
.String
getContainerName()
Return current value associated with the property corresponding toMeter.getContainerName()
.MeterFlags
getFlags()
Return current value associated with the property corresponding toMeter.getFlags()
.MeterBandHeaders
getMeterBandHeaders()
Return current value associated with the property corresponding toMeter.getMeterBandHeaders()
.MeterId
getMeterId()
Return current value associated with the property corresponding toMeter.getMeterId()
.String
getMeterName()
Return current value associated with the property corresponding toMeter.getMeterName()
.MeterRef
getMeterRef()
Return current value associated with the property corresponding toAddMeterInput.getMeterRef()
.NodeRef
getNode()
Return current value associated with the property corresponding toNodeContextRef.getNode()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri
getTransactionUri()
Return current value associated with the property corresponding toTransactionMetadata.getTransactionUri()
.AddMeterInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddMeterInput>> augmentationType)
Remove an augmentation from this builder's product.AddMeterInputBuilder
setBarrier(Boolean value)
Set the property corresponding toMeter.getBarrier()
to the specified value.AddMeterInputBuilder
setContainerName(String value)
Set the property corresponding toMeter.getContainerName()
to the specified value.AddMeterInputBuilder
setFlags(MeterFlags value)
Set the property corresponding toMeter.getFlags()
to the specified value.AddMeterInputBuilder
setMeterBandHeaders(MeterBandHeaders value)
Set the property corresponding toMeter.getMeterBandHeaders()
to the specified value.AddMeterInputBuilder
setMeterId(MeterId value)
Set the property corresponding toMeter.getMeterId()
to the specified value.AddMeterInputBuilder
setMeterName(String value)
Set the property corresponding toMeter.getMeterName()
to the specified value.AddMeterInputBuilder
setMeterRef(MeterRef value)
Set the property corresponding toAddMeterInput.getMeterRef()
to the specified value.AddMeterInputBuilder
setNode(NodeRef value)
Set the property corresponding toNodeContextRef.getNode()
to the specified value.AddMeterInputBuilder
setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
Set the property corresponding toTransactionMetadata.getTransactionUri()
to the specified value.
-
-
-
Constructor Detail
-
AddMeterInputBuilder
public AddMeterInputBuilder()
Construct an empty builder.
-
AddMeterInputBuilder
public AddMeterInputBuilder(TransactionMetadata arg)
Construct a new builder initialized from specifiedTransactionMetadata
.- Parameters:
arg
- TransactionMetadata from which the builder should be initialized
-
AddMeterInputBuilder
public AddMeterInputBuilder(NodeMeter arg)
Construct a new builder initialized from specifiedNodeMeter
.- Parameters:
arg
- NodeMeter from which the builder should be initialized
-
AddMeterInputBuilder
public AddMeterInputBuilder(NodeContextRef arg)
Construct a new builder initialized from specifiedNodeContextRef
.- Parameters:
arg
- NodeContextRef from which the builder should be initialized
-
AddMeterInputBuilder
public AddMeterInputBuilder(Meter arg)
Construct a new builder initialized from specifiedMeter
.- Parameters:
arg
- Meter from which the builder should be initialized
-
AddMeterInputBuilder
public AddMeterInputBuilder(AddMeterInput base)
Construct a builder initialized with state from specifiedAddMeterInput
.- Parameters:
base
- AddMeterInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBarrier
public Boolean getBarrier()
Return current value associated with the property corresponding toMeter.getBarrier()
.- Returns:
- current value
-
getContainerName
public String getContainerName()
Return current value associated with the property corresponding toMeter.getContainerName()
.- Returns:
- current value
-
getFlags
public MeterFlags getFlags()
Return current value associated with the property corresponding toMeter.getFlags()
.- Returns:
- current value
-
getMeterBandHeaders
public MeterBandHeaders getMeterBandHeaders()
Return current value associated with the property corresponding toMeter.getMeterBandHeaders()
.- Returns:
- current value
-
getMeterId
public MeterId getMeterId()
Return current value associated with the property corresponding toMeter.getMeterId()
.- Returns:
- current value
-
getMeterName
public String getMeterName()
Return current value associated with the property corresponding toMeter.getMeterName()
.- Returns:
- current value
-
getMeterRef
public MeterRef getMeterRef()
Return current value associated with the property corresponding toAddMeterInput.getMeterRef()
.- Returns:
- current value
-
getNode
public NodeRef getNode()
Return current value associated with the property corresponding toNodeContextRef.getNode()
.- Returns:
- current value
-
getTransactionUri
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri getTransactionUri()
Return current value associated with the property corresponding toTransactionMetadata.getTransactionUri()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddMeterInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBarrier
public AddMeterInputBuilder setBarrier(Boolean value)
Set the property corresponding toMeter.getBarrier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setContainerName
public AddMeterInputBuilder setContainerName(String value)
Set the property corresponding toMeter.getContainerName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlags
public AddMeterInputBuilder setFlags(MeterFlags value)
Set the property corresponding toMeter.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterBandHeaders
public AddMeterInputBuilder setMeterBandHeaders(MeterBandHeaders value)
Set the property corresponding toMeter.getMeterBandHeaders()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterId
public AddMeterInputBuilder setMeterId(MeterId value)
Set the property corresponding toMeter.getMeterId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterName
public AddMeterInputBuilder setMeterName(String value)
Set the property corresponding toMeter.getMeterName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterRef
public AddMeterInputBuilder setMeterRef(MeterRef value)
Set the property corresponding toAddMeterInput.getMeterRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNode
public AddMeterInputBuilder setNode(NodeRef value)
Set the property corresponding toNodeContextRef.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTransactionUri
public AddMeterInputBuilder setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
Set the property corresponding toTransactionMetadata.getTransactionUri()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public AddMeterInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddMeterInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public AddMeterInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddMeterInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull AddMeterInput build()
A newAddMeterInput
instance.- Returns:
- A new
AddMeterInput
instance.
-
-