Class AddGroupInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.group.service.rev130918.AddGroupInputBuilder
-
@Generated("mdsal-binding-generator") public class AddGroupInputBuilder extends Object
Class that buildsAddGroupInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
AddGroupInput createAddGroupInput(int fooXyzzy, int barBaz) { return new AddGroupInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of AddGroupInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
AddGroupInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description AddGroupInputBuilder()
Construct an empty builder.AddGroupInputBuilder(TransactionMetadata arg)
Construct a new builder initialized from specifiedTransactionMetadata
.AddGroupInputBuilder(AddGroupInput base)
Construct a builder initialized with state from specifiedAddGroupInput
.AddGroupInputBuilder(NodeGroup arg)
Construct a new builder initialized from specifiedNodeGroup
.AddGroupInputBuilder(Group arg)
Construct a new builder initialized from specifiedGroup
.AddGroupInputBuilder(NodeContextRef arg)
Construct a new builder initialized from specifiedNodeContextRef
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description AddGroupInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddGroupInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddGroupInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull AddGroupInput
build()
A newAddGroupInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getBarrier()
Return current value associated with the property corresponding toGroup.getBarrier()
.Buckets
getBuckets()
Return current value associated with the property corresponding toGroup.getBuckets()
.String
getContainerName()
Return current value associated with the property corresponding toGroup.getContainerName()
.GroupId
getGroupId()
Return current value associated with the property corresponding toGroup.getGroupId()
.String
getGroupName()
Return current value associated with the property corresponding toGroup.getGroupName()
.GroupRef
getGroupRef()
Return current value associated with the property corresponding toAddGroupInput.getGroupRef()
.GroupTypes
getGroupType()
Return current value associated with the property corresponding toGroup.getGroupType()
.NodeRef
getNode()
Return current value associated with the property corresponding toNodeContextRef.getNode()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri
getTransactionUri()
Return current value associated with the property corresponding toTransactionMetadata.getTransactionUri()
.AddGroupInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddGroupInput>> augmentationType)
Remove an augmentation from this builder's product.AddGroupInputBuilder
setBarrier(Boolean value)
Set the property corresponding toGroup.getBarrier()
to the specified value.AddGroupInputBuilder
setBuckets(Buckets value)
Set the property corresponding toGroup.getBuckets()
to the specified value.AddGroupInputBuilder
setContainerName(String value)
Set the property corresponding toGroup.getContainerName()
to the specified value.AddGroupInputBuilder
setGroupId(GroupId value)
Set the property corresponding toGroup.getGroupId()
to the specified value.AddGroupInputBuilder
setGroupName(String value)
Set the property corresponding toGroup.getGroupName()
to the specified value.AddGroupInputBuilder
setGroupRef(GroupRef value)
Set the property corresponding toAddGroupInput.getGroupRef()
to the specified value.AddGroupInputBuilder
setGroupType(GroupTypes value)
Set the property corresponding toGroup.getGroupType()
to the specified value.AddGroupInputBuilder
setNode(NodeRef value)
Set the property corresponding toNodeContextRef.getNode()
to the specified value.AddGroupInputBuilder
setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
Set the property corresponding toTransactionMetadata.getTransactionUri()
to the specified value.
-
-
-
Constructor Detail
-
AddGroupInputBuilder
public AddGroupInputBuilder()
Construct an empty builder.
-
AddGroupInputBuilder
public AddGroupInputBuilder(TransactionMetadata arg)
Construct a new builder initialized from specifiedTransactionMetadata
.- Parameters:
arg
- TransactionMetadata from which the builder should be initialized
-
AddGroupInputBuilder
public AddGroupInputBuilder(NodeGroup arg)
Construct a new builder initialized from specifiedNodeGroup
.- Parameters:
arg
- NodeGroup from which the builder should be initialized
-
AddGroupInputBuilder
public AddGroupInputBuilder(NodeContextRef arg)
Construct a new builder initialized from specifiedNodeContextRef
.- Parameters:
arg
- NodeContextRef from which the builder should be initialized
-
AddGroupInputBuilder
public AddGroupInputBuilder(Group arg)
Construct a new builder initialized from specifiedGroup
.- Parameters:
arg
- Group from which the builder should be initialized
-
AddGroupInputBuilder
public AddGroupInputBuilder(AddGroupInput base)
Construct a builder initialized with state from specifiedAddGroupInput
.- Parameters:
base
- AddGroupInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBarrier
public Boolean getBarrier()
Return current value associated with the property corresponding toGroup.getBarrier()
.- Returns:
- current value
-
getBuckets
public Buckets getBuckets()
Return current value associated with the property corresponding toGroup.getBuckets()
.- Returns:
- current value
-
getContainerName
public String getContainerName()
Return current value associated with the property corresponding toGroup.getContainerName()
.- Returns:
- current value
-
getGroupId
public GroupId getGroupId()
Return current value associated with the property corresponding toGroup.getGroupId()
.- Returns:
- current value
-
getGroupName
public String getGroupName()
Return current value associated with the property corresponding toGroup.getGroupName()
.- Returns:
- current value
-
getGroupRef
public GroupRef getGroupRef()
Return current value associated with the property corresponding toAddGroupInput.getGroupRef()
.- Returns:
- current value
-
getGroupType
public GroupTypes getGroupType()
Return current value associated with the property corresponding toGroup.getGroupType()
.- Returns:
- current value
-
getNode
public NodeRef getNode()
Return current value associated with the property corresponding toNodeContextRef.getNode()
.- Returns:
- current value
-
getTransactionUri
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri getTransactionUri()
Return current value associated with the property corresponding toTransactionMetadata.getTransactionUri()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddGroupInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBarrier
public AddGroupInputBuilder setBarrier(Boolean value)
Set the property corresponding toGroup.getBarrier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBuckets
public AddGroupInputBuilder setBuckets(Buckets value)
Set the property corresponding toGroup.getBuckets()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setContainerName
public AddGroupInputBuilder setContainerName(String value)
Set the property corresponding toGroup.getContainerName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setGroupId
public AddGroupInputBuilder setGroupId(GroupId value)
Set the property corresponding toGroup.getGroupId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setGroupName
public AddGroupInputBuilder setGroupName(String value)
Set the property corresponding toGroup.getGroupName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setGroupRef
public AddGroupInputBuilder setGroupRef(GroupRef value)
Set the property corresponding toAddGroupInput.getGroupRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setGroupType
public AddGroupInputBuilder setGroupType(GroupTypes value)
Set the property corresponding toGroup.getGroupType()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNode
public AddGroupInputBuilder setNode(NodeRef value)
Set the property corresponding toNodeContextRef.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTransactionUri
public AddGroupInputBuilder setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
Set the property corresponding toTransactionMetadata.getTransactionUri()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public AddGroupInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddGroupInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public AddGroupInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddGroupInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull AddGroupInput build()
A newAddGroupInput
instance.- Returns:
- A new
AddGroupInput
instance.
-
-