Class BatchAddFlowsBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.flows.service.rev160314.add.flows.batch.input.BatchAddFlowsBuilder
-
@Generated("mdsal-binding-generator") public class BatchAddFlowsBuilder extends Object
Class that buildsBatchAddFlows
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
BatchAddFlows createBatchAddFlows(int fooXyzzy, int barBaz) { return new BatchAddFlowsBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of BatchAddFlows, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
BatchAddFlows
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description BatchAddFlowsBuilder()
Construct an empty builder.BatchAddFlowsBuilder(Flow arg)
Construct a new builder initialized from specifiedFlow
.BatchAddFlowsBuilder(GenericFlowAttributes arg)
Construct a new builder initialized from specifiedGenericFlowAttributes
.BatchAddFlowsBuilder(BatchAddFlows base)
Construct a builder initialized with state from specifiedBatchAddFlows
.BatchAddFlowsBuilder(BatchFlowIdGrouping arg)
Construct a new builder initialized from specifiedBatchFlowIdGrouping
.BatchAddFlowsBuilder(BatchFlowInputGrouping arg)
Construct a new builder initialized from specifiedBatchFlowInputGrouping
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description BatchAddFlowsBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<BatchAddFlows> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<BatchAddFlows>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull BatchAddFlows
build()
A newBatchAddFlows
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getBarrier()
Return current value associated with the property corresponding toFlow.getBarrier()
.org.opendaylight.yangtools.yang.common.Uint32
getBufferId()
Return current value associated with the property corresponding toFlow.getBufferId()
.String
getContainerName()
Return current value associated with the property corresponding toFlow.getContainerName()
.FlowCookie
getCookie()
Return current value associated with the property corresponding toGenericFlowAttributes.getCookie()
.FlowCookie
getCookieMask()
Return current value associated with the property corresponding toFlow.getCookieMask()
.FlowModFlags
getFlags()
Return current value associated with the property corresponding toFlow.getFlags()
.FlowId
getFlowId()
Return current value associated with the property corresponding toBatchFlowIdGrouping.getFlowId()
.String
getFlowName()
Return current value associated with the property corresponding toFlow.getFlowName()
.org.opendaylight.yangtools.yang.common.Uint16
getHardTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getHardTimeout()
.org.opendaylight.yangtools.yang.common.Uint16
getIdleTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getIdleTimeout()
.Boolean
getInstallHw()
Return current value associated with the property corresponding toFlow.getInstallHw()
.Instructions
getInstructions()
Return current value associated with the property corresponding toFlow.getInstructions()
.Match
getMatch()
Return current value associated with the property corresponding toFlow.getMatch()
.org.opendaylight.yangtools.yang.common.Uint32
getOutGroup()
Return current value associated with the property corresponding toFlow.getOutGroup()
.org.opendaylight.yangtools.yang.common.Uint64
getOutPort()
Return current value associated with the property corresponding toFlow.getOutPort()
.org.opendaylight.yangtools.yang.common.Uint16
getPriority()
Return current value associated with the property corresponding toGenericFlowAttributes.getPriority()
.Boolean
getStrict()
Return current value associated with the property corresponding toFlow.getStrict()
.org.opendaylight.yangtools.yang.common.Uint8
getTableId()
Return current value associated with the property corresponding toGenericFlowAttributes.getTableId()
.BatchAddFlowsKey
key()
Return current value associated with the property corresponding toBatchAddFlows.key()
.BatchAddFlowsBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<BatchAddFlows>> augmentationType)
Remove an augmentation from this builder's product.BatchAddFlowsBuilder
setBarrier(Boolean value)
Set the property corresponding toFlow.getBarrier()
to the specified value.BatchAddFlowsBuilder
setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getBufferId()
to the specified value.BatchAddFlowsBuilder
setContainerName(String value)
Set the property corresponding toFlow.getContainerName()
to the specified value.BatchAddFlowsBuilder
setCookie(FlowCookie value)
Set the property corresponding toGenericFlowAttributes.getCookie()
to the specified value.BatchAddFlowsBuilder
setCookieMask(FlowCookie value)
Set the property corresponding toFlow.getCookieMask()
to the specified value.BatchAddFlowsBuilder
setFlags(FlowModFlags value)
Set the property corresponding toFlow.getFlags()
to the specified value.BatchAddFlowsBuilder
setFlowId(FlowId value)
Set the property corresponding toBatchFlowIdGrouping.getFlowId()
to the specified value.BatchAddFlowsBuilder
setFlowName(String value)
Set the property corresponding toFlow.getFlowName()
to the specified value.BatchAddFlowsBuilder
setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getHardTimeout()
to the specified value.BatchAddFlowsBuilder
setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getIdleTimeout()
to the specified value.BatchAddFlowsBuilder
setInstallHw(Boolean value)
Set the property corresponding toFlow.getInstallHw()
to the specified value.BatchAddFlowsBuilder
setInstructions(Instructions value)
Set the property corresponding toFlow.getInstructions()
to the specified value.BatchAddFlowsBuilder
setMatch(Match value)
Set the property corresponding toFlow.getMatch()
to the specified value.BatchAddFlowsBuilder
setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getOutGroup()
to the specified value.BatchAddFlowsBuilder
setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlow.getOutPort()
to the specified value.BatchAddFlowsBuilder
setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getPriority()
to the specified value.BatchAddFlowsBuilder
setStrict(Boolean value)
Set the property corresponding toFlow.getStrict()
to the specified value.BatchAddFlowsBuilder
setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGenericFlowAttributes.getTableId()
to the specified value.BatchAddFlowsBuilder
withKey(BatchAddFlowsKey key)
-
-
-
Constructor Detail
-
BatchAddFlowsBuilder
public BatchAddFlowsBuilder()
Construct an empty builder.
-
BatchAddFlowsBuilder
public BatchAddFlowsBuilder(BatchFlowInputGrouping arg)
Construct a new builder initialized from specifiedBatchFlowInputGrouping
.- Parameters:
arg
- BatchFlowInputGrouping from which the builder should be initialized
-
BatchAddFlowsBuilder
public BatchAddFlowsBuilder(BatchFlowIdGrouping arg)
Construct a new builder initialized from specifiedBatchFlowIdGrouping
.- Parameters:
arg
- BatchFlowIdGrouping from which the builder should be initialized
-
BatchAddFlowsBuilder
public BatchAddFlowsBuilder(Flow arg)
Construct a new builder initialized from specifiedFlow
.- Parameters:
arg
- Flow from which the builder should be initialized
-
BatchAddFlowsBuilder
public BatchAddFlowsBuilder(GenericFlowAttributes arg)
Construct a new builder initialized from specifiedGenericFlowAttributes
.- Parameters:
arg
- GenericFlowAttributes from which the builder should be initialized
-
BatchAddFlowsBuilder
public BatchAddFlowsBuilder(BatchAddFlows base)
Construct a builder initialized with state from specifiedBatchAddFlows
.- Parameters:
base
- BatchAddFlows from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
key
public BatchAddFlowsKey key()
Return current value associated with the property corresponding toBatchAddFlows.key()
.- Returns:
- current value
-
getBarrier
public Boolean getBarrier()
Return current value associated with the property corresponding toFlow.getBarrier()
.- Returns:
- current value
-
getBufferId
public org.opendaylight.yangtools.yang.common.Uint32 getBufferId()
Return current value associated with the property corresponding toFlow.getBufferId()
.- Returns:
- current value
-
getContainerName
public String getContainerName()
Return current value associated with the property corresponding toFlow.getContainerName()
.- Returns:
- current value
-
getCookie
public FlowCookie getCookie()
Return current value associated with the property corresponding toGenericFlowAttributes.getCookie()
.- Returns:
- current value
-
getCookieMask
public FlowCookie getCookieMask()
Return current value associated with the property corresponding toFlow.getCookieMask()
.- Returns:
- current value
-
getFlags
public FlowModFlags getFlags()
Return current value associated with the property corresponding toFlow.getFlags()
.- Returns:
- current value
-
getFlowId
public FlowId getFlowId()
Return current value associated with the property corresponding toBatchFlowIdGrouping.getFlowId()
.- Returns:
- current value
-
getFlowName
public String getFlowName()
Return current value associated with the property corresponding toFlow.getFlowName()
.- Returns:
- current value
-
getHardTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getHardTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getHardTimeout()
.- Returns:
- current value
-
getIdleTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getIdleTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getIdleTimeout()
.- Returns:
- current value
-
getInstallHw
public Boolean getInstallHw()
Return current value associated with the property corresponding toFlow.getInstallHw()
.- Returns:
- current value
-
getInstructions
public Instructions getInstructions()
Return current value associated with the property corresponding toFlow.getInstructions()
.- Returns:
- current value
-
getMatch
public Match getMatch()
Return current value associated with the property corresponding toFlow.getMatch()
.- Returns:
- current value
-
getOutGroup
public org.opendaylight.yangtools.yang.common.Uint32 getOutGroup()
Return current value associated with the property corresponding toFlow.getOutGroup()
.- Returns:
- current value
-
getOutPort
public org.opendaylight.yangtools.yang.common.Uint64 getOutPort()
Return current value associated with the property corresponding toFlow.getOutPort()
.- Returns:
- current value
-
getPriority
public org.opendaylight.yangtools.yang.common.Uint16 getPriority()
Return current value associated with the property corresponding toGenericFlowAttributes.getPriority()
.- Returns:
- current value
-
getStrict
public Boolean getStrict()
Return current value associated with the property corresponding toFlow.getStrict()
.- Returns:
- current value
-
getTableId
public org.opendaylight.yangtools.yang.common.Uint8 getTableId()
Return current value associated with the property corresponding toGenericFlowAttributes.getTableId()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<BatchAddFlows>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
withKey
public BatchAddFlowsBuilder withKey(BatchAddFlowsKey key)
-
setBarrier
public BatchAddFlowsBuilder setBarrier(Boolean value)
Set the property corresponding toFlow.getBarrier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBufferId
public BatchAddFlowsBuilder setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getBufferId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setContainerName
public BatchAddFlowsBuilder setContainerName(String value)
Set the property corresponding toFlow.getContainerName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookie
public BatchAddFlowsBuilder setCookie(FlowCookie value)
Set the property corresponding toGenericFlowAttributes.getCookie()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookieMask
public BatchAddFlowsBuilder setCookieMask(FlowCookie value)
Set the property corresponding toFlow.getCookieMask()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlags
public BatchAddFlowsBuilder setFlags(FlowModFlags value)
Set the property corresponding toFlow.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowId
public BatchAddFlowsBuilder setFlowId(FlowId value)
Set the property corresponding toBatchFlowIdGrouping.getFlowId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowName
public BatchAddFlowsBuilder setFlowName(String value)
Set the property corresponding toFlow.getFlowName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHardTimeout
public BatchAddFlowsBuilder setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getHardTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIdleTimeout
public BatchAddFlowsBuilder setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getIdleTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstallHw
public BatchAddFlowsBuilder setInstallHw(Boolean value)
Set the property corresponding toFlow.getInstallHw()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstructions
public BatchAddFlowsBuilder setInstructions(Instructions value)
Set the property corresponding toFlow.getInstructions()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMatch
public BatchAddFlowsBuilder setMatch(Match value)
Set the property corresponding toFlow.getMatch()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutGroup
public BatchAddFlowsBuilder setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getOutGroup()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutPort
public BatchAddFlowsBuilder setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlow.getOutPort()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPriority
public BatchAddFlowsBuilder setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setStrict
public BatchAddFlowsBuilder setStrict(Boolean value)
Set the property corresponding toFlow.getStrict()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTableId
public BatchAddFlowsBuilder setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGenericFlowAttributes.getTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public BatchAddFlowsBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<BatchAddFlows> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public BatchAddFlowsBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<BatchAddFlows>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull BatchAddFlows build()
A newBatchAddFlows
instance.- Returns:
- A new
BatchAddFlows
instance.
-
-