Class FlowCapableNodeConnectorUpdatedBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.FlowCapableNodeConnectorUpdatedBuilder
-
@Generated("mdsal-binding-generator") public class FlowCapableNodeConnectorUpdatedBuilder extends Object
Class that buildsFlowCapableNodeConnectorUpdated
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
FlowCapableNodeConnectorUpdated createFlowCapableNodeConnectorUpdated(int fooXyzzy, int barBaz) { return new FlowCapableNodeConnectorUpdatedBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of FlowCapableNodeConnectorUpdated, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
FlowCapableNodeConnectorUpdated
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description FlowCapableNodeConnectorUpdatedBuilder()
Construct an empty builder.FlowCapableNodeConnectorUpdatedBuilder(FlowCapableNodeConnectorUpdated base)
Construct a builder initialized with state from specifiedFlowCapableNodeConnectorUpdated
.FlowCapableNodeConnectorUpdatedBuilder(FlowNodeConnector arg)
Construct a new builder initialized from specifiedFlowNodeConnector
.FlowCapableNodeConnectorUpdatedBuilder(CommonPort arg)
Construct a new builder initialized from specifiedCommonPort
.FlowCapableNodeConnectorUpdatedBuilder(FlowCapablePort arg)
Construct a new builder initialized from specifiedFlowCapablePort
.FlowCapableNodeConnectorUpdatedBuilder(Queues arg)
Construct a new builder initialized from specifiedQueues
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description @NonNull FlowCapableNodeConnectorUpdated
build()
A newFlowCapableNodeConnectorUpdated
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.PortFeatures
getAdvertisedFeatures()
Return current value associated with the property corresponding toCommonPort.getAdvertisedFeatures()
.PortConfig
getConfiguration()
Return current value associated with the property corresponding toCommonPort.getConfiguration()
.PortFeatures
getCurrentFeature()
Return current value associated with the property corresponding toFlowCapablePort.getCurrentFeature()
.org.opendaylight.yangtools.yang.common.Uint32
getCurrentSpeed()
Return current value associated with the property corresponding toFlowCapablePort.getCurrentSpeed()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress
getHardwareAddress()
Return current value associated with the property corresponding toCommonPort.getHardwareAddress()
.org.opendaylight.yangtools.yang.common.Uint32
getMaximumSpeed()
Return current value associated with the property corresponding toFlowCapablePort.getMaximumSpeed()
.String
getName()
Return current value associated with the property corresponding toFlowCapablePort.getName()
.PortFeatures
getPeerFeatures()
Return current value associated with the property corresponding toFlowCapablePort.getPeerFeatures()
.PortNumberUni
getPortNumber()
Return current value associated with the property corresponding toCommonPort.getPortNumber()
.Map<QueueKey,Queue>
getQueue()
Return current value associated with the property corresponding toQueues.getQueue()
.PortReason
getReason()
Return current value associated with the property corresponding toFlowNodeConnector.getReason()
.State
getState()
Return current value associated with the property corresponding toFlowCapablePort.getState()
.PortFeatures
getSupported()
Return current value associated with the property corresponding toFlowCapablePort.getSupported()
.FlowCapableNodeConnectorUpdatedBuilder
setAdvertisedFeatures(PortFeatures value)
Set the property corresponding toCommonPort.getAdvertisedFeatures()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setConfiguration(PortConfig value)
Set the property corresponding toCommonPort.getConfiguration()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setCurrentFeature(PortFeatures value)
Set the property corresponding toFlowCapablePort.getCurrentFeature()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setCurrentSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowCapablePort.getCurrentSpeed()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setHardwareAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
Set the property corresponding toCommonPort.getHardwareAddress()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setMaximumSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowCapablePort.getMaximumSpeed()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setName(String value)
Set the property corresponding toFlowCapablePort.getName()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setPeerFeatures(PortFeatures value)
Set the property corresponding toFlowCapablePort.getPeerFeatures()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setPortNumber(PortNumberUni value)
Set the property corresponding toCommonPort.getPortNumber()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setQueue(Map<QueueKey,Queue> values)
Set the property corresponding toQueues.getQueue()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setReason(PortReason value)
Set the property corresponding toFlowNodeConnector.getReason()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setState(State value)
Set the property corresponding toFlowCapablePort.getState()
to the specified value.FlowCapableNodeConnectorUpdatedBuilder
setSupported(PortFeatures value)
Set the property corresponding toFlowCapablePort.getSupported()
to the specified value.
-
-
-
Constructor Detail
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder()
Construct an empty builder.
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder(FlowNodeConnector arg)
Construct a new builder initialized from specifiedFlowNodeConnector
.- Parameters:
arg
- FlowNodeConnector from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder(FlowCapablePort arg)
Construct a new builder initialized from specifiedFlowCapablePort
.- Parameters:
arg
- FlowCapablePort from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder(CommonPort arg)
Construct a new builder initialized from specifiedCommonPort
.- Parameters:
arg
- CommonPort from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder(Queues arg)
Construct a new builder initialized from specifiedQueues
.- Parameters:
arg
- Queues from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder(FlowCapableNodeConnectorUpdated base)
Construct a builder initialized with state from specifiedFlowCapableNodeConnectorUpdated
.- Parameters:
base
- FlowCapableNodeConnectorUpdated from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAdvertisedFeatures
public PortFeatures getAdvertisedFeatures()
Return current value associated with the property corresponding toCommonPort.getAdvertisedFeatures()
.- Returns:
- current value
-
getConfiguration
public PortConfig getConfiguration()
Return current value associated with the property corresponding toCommonPort.getConfiguration()
.- Returns:
- current value
-
getCurrentFeature
public PortFeatures getCurrentFeature()
Return current value associated with the property corresponding toFlowCapablePort.getCurrentFeature()
.- Returns:
- current value
-
getCurrentSpeed
public org.opendaylight.yangtools.yang.common.Uint32 getCurrentSpeed()
Return current value associated with the property corresponding toFlowCapablePort.getCurrentSpeed()
.- Returns:
- current value
-
getHardwareAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getHardwareAddress()
Return current value associated with the property corresponding toCommonPort.getHardwareAddress()
.- Returns:
- current value
-
getMaximumSpeed
public org.opendaylight.yangtools.yang.common.Uint32 getMaximumSpeed()
Return current value associated with the property corresponding toFlowCapablePort.getMaximumSpeed()
.- Returns:
- current value
-
getName
public String getName()
Return current value associated with the property corresponding toFlowCapablePort.getName()
.- Returns:
- current value
-
getPeerFeatures
public PortFeatures getPeerFeatures()
Return current value associated with the property corresponding toFlowCapablePort.getPeerFeatures()
.- Returns:
- current value
-
getPortNumber
public PortNumberUni getPortNumber()
Return current value associated with the property corresponding toCommonPort.getPortNumber()
.- Returns:
- current value
-
getQueue
public Map<QueueKey,Queue> getQueue()
Return current value associated with the property corresponding toQueues.getQueue()
.- Returns:
- current value
-
getReason
public PortReason getReason()
Return current value associated with the property corresponding toFlowNodeConnector.getReason()
.- Returns:
- current value
-
getState
public State getState()
Return current value associated with the property corresponding toFlowCapablePort.getState()
.- Returns:
- current value
-
getSupported
public PortFeatures getSupported()
Return current value associated with the property corresponding toFlowCapablePort.getSupported()
.- Returns:
- current value
-
setAdvertisedFeatures
public FlowCapableNodeConnectorUpdatedBuilder setAdvertisedFeatures(PortFeatures value)
Set the property corresponding toCommonPort.getAdvertisedFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setConfiguration
public FlowCapableNodeConnectorUpdatedBuilder setConfiguration(PortConfig value)
Set the property corresponding toCommonPort.getConfiguration()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrentFeature
public FlowCapableNodeConnectorUpdatedBuilder setCurrentFeature(PortFeatures value)
Set the property corresponding toFlowCapablePort.getCurrentFeature()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrentSpeed
public FlowCapableNodeConnectorUpdatedBuilder setCurrentSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowCapablePort.getCurrentSpeed()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHardwareAddress
public FlowCapableNodeConnectorUpdatedBuilder setHardwareAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
Set the property corresponding toCommonPort.getHardwareAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaximumSpeed
public FlowCapableNodeConnectorUpdatedBuilder setMaximumSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowCapablePort.getMaximumSpeed()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setName
public FlowCapableNodeConnectorUpdatedBuilder setName(String value)
Set the property corresponding toFlowCapablePort.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPeerFeatures
public FlowCapableNodeConnectorUpdatedBuilder setPeerFeatures(PortFeatures value)
Set the property corresponding toFlowCapablePort.getPeerFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPortNumber
public FlowCapableNodeConnectorUpdatedBuilder setPortNumber(PortNumberUni value)
Set the property corresponding toCommonPort.getPortNumber()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setQueue
public FlowCapableNodeConnectorUpdatedBuilder setQueue(Map<QueueKey,Queue> values)
Set the property corresponding toQueues.getQueue()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setReason
public FlowCapableNodeConnectorUpdatedBuilder setReason(PortReason value)
Set the property corresponding toFlowNodeConnector.getReason()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setState
public FlowCapableNodeConnectorUpdatedBuilder setState(State value)
Set the property corresponding toFlowCapablePort.getState()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSupported
public FlowCapableNodeConnectorUpdatedBuilder setSupported(PortFeatures value)
Set the property corresponding toFlowCapablePort.getSupported()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
build
public @NonNull FlowCapableNodeConnectorUpdated build()
A newFlowCapableNodeConnectorUpdated
instance.- Returns:
- A new
FlowCapableNodeConnectorUpdated
instance.
-
-