Class FlowCapableNodeConnectorUpdatedBuilder
java.lang.Object
org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.FlowCapableNodeConnectorUpdatedBuilder
@Generated("mdsal-binding-generator")
public class FlowCapableNodeConnectorUpdatedBuilder
extends Object
Class that builds
FlowCapableNodeConnectorUpdated
instances. Overall design of the class is that of a
fluent interface, where method chaining is used.
In general, this class is supposed to be used like this template:
FlowCapableNodeConnectorUpdated createFlowCapableNodeConnectorUpdated(int fooXyzzy, int barBaz) {
return new FlowCapableNodeConnectorUpdatedBuilder()
.setFoo(new FooBuilder().setXyzzy(fooXyzzy).build())
.setBar(new BarBuilder().setBaz(barBaz).build())
.build();
}
This pattern is supported by the immutable nature of FlowCapableNodeConnectorUpdated, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
-
Constructor Summary
ConstructorDescriptionConstruct an empty builder.Construct a builder initialized with state from specifiedFlowCapableNodeConnectorUpdated
.Construct a new builder initialized from specifiedFlowNodeConnector
.Construct a new builder initialized from specifiedCommonPort
.Construct a new builder initialized from specifiedFlowCapablePort
.Construct a new builder initialized from specifiedQueues
. -
Method Summary
Modifier and TypeMethodDescription@NonNull FlowCapableNodeConnectorUpdated
build()
A newFlowCapableNodeConnectorUpdated
instance.void
fieldsFrom
(org.opendaylight.yangtools.yang.binding.DataObject arg) Set fields from given grouping argument.Return current value associated with the property corresponding toCommonPort.getAdvertisedFeatures()
.Return current value associated with the property corresponding toCommonPort.getConfiguration()
.Return current value associated with the property corresponding toFlowCapablePort.getCurrentFeature()
.org.opendaylight.yangtools.yang.common.Uint32
Return current value associated with the property corresponding toFlowCapablePort.getCurrentSpeed()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress
Return current value associated with the property corresponding toCommonPort.getHardwareAddress()
.org.opendaylight.yangtools.yang.common.Uint32
Return current value associated with the property corresponding toFlowCapablePort.getMaximumSpeed()
.getName()
Return current value associated with the property corresponding toFlowCapablePort.getName()
.Return current value associated with the property corresponding toFlowCapablePort.getPeerFeatures()
.Return current value associated with the property corresponding toCommonPort.getPortNumber()
.getQueue()
Return current value associated with the property corresponding toQueues.getQueue()
.Return current value associated with the property corresponding toFlowNodeConnector.getReason()
.getState()
Return current value associated with the property corresponding toFlowCapablePort.getState()
.Return current value associated with the property corresponding toFlowCapablePort.getSupported()
.Set the property corresponding toCommonPort.getAdvertisedFeatures()
to the specified value.setConfiguration
(PortConfig value) Set the property corresponding toCommonPort.getConfiguration()
to the specified value.setCurrentFeature
(PortFeatures value) Set the property corresponding toFlowCapablePort.getCurrentFeature()
to the specified value.setCurrentSpeed
(org.opendaylight.yangtools.yang.common.Uint32 value) Set the property corresponding toFlowCapablePort.getCurrentSpeed()
to the specified value.setHardwareAddress
(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value) Set the property corresponding toCommonPort.getHardwareAddress()
to the specified value.setMaximumSpeed
(org.opendaylight.yangtools.yang.common.Uint32 value) Set the property corresponding toFlowCapablePort.getMaximumSpeed()
to the specified value.Set the property corresponding toFlowCapablePort.getName()
to the specified value.setPeerFeatures
(PortFeatures value) Set the property corresponding toFlowCapablePort.getPeerFeatures()
to the specified value.setPortNumber
(PortNumberUni value) Set the property corresponding toCommonPort.getPortNumber()
to the specified value.Set the property corresponding toQueues.getQueue()
to the specified value.setReason
(PortReason value) Set the property corresponding toFlowNodeConnector.getReason()
to the specified value.Set the property corresponding toFlowCapablePort.getState()
to the specified value.setSupported
(PortFeatures value) Set the property corresponding toFlowCapablePort.getSupported()
to the specified value.
-
Constructor Details
-
FlowCapableNodeConnectorUpdatedBuilder
public FlowCapableNodeConnectorUpdatedBuilder()Construct an empty builder. -
FlowCapableNodeConnectorUpdatedBuilder
Construct a new builder initialized from specifiedFlowNodeConnector
.- Parameters:
arg
- FlowNodeConnector from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
Construct a new builder initialized from specifiedFlowCapablePort
.- Parameters:
arg
- FlowCapablePort from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
Construct a new builder initialized from specifiedCommonPort
.- Parameters:
arg
- CommonPort from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
Construct a new builder initialized from specifiedQueues
.- Parameters:
arg
- Queues from which the builder should be initialized
-
FlowCapableNodeConnectorUpdatedBuilder
Construct a builder initialized with state from specifiedFlowCapableNodeConnectorUpdated
.- Parameters:
base
- FlowCapableNodeConnectorUpdated from which the builder should be initialized
-
-
Method Details
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg) Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAdvertisedFeatures
Return current value associated with the property corresponding toCommonPort.getAdvertisedFeatures()
.- Returns:
- current value
-
getConfiguration
Return current value associated with the property corresponding toCommonPort.getConfiguration()
.- Returns:
- current value
-
getCurrentFeature
Return current value associated with the property corresponding toFlowCapablePort.getCurrentFeature()
.- Returns:
- current value
-
getCurrentSpeed
public org.opendaylight.yangtools.yang.common.Uint32 getCurrentSpeed()Return current value associated with the property corresponding toFlowCapablePort.getCurrentSpeed()
.- Returns:
- current value
-
getHardwareAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getHardwareAddress()Return current value associated with the property corresponding toCommonPort.getHardwareAddress()
.- Returns:
- current value
-
getMaximumSpeed
public org.opendaylight.yangtools.yang.common.Uint32 getMaximumSpeed()Return current value associated with the property corresponding toFlowCapablePort.getMaximumSpeed()
.- Returns:
- current value
-
getName
Return current value associated with the property corresponding toFlowCapablePort.getName()
.- Returns:
- current value
-
getPeerFeatures
Return current value associated with the property corresponding toFlowCapablePort.getPeerFeatures()
.- Returns:
- current value
-
getPortNumber
Return current value associated with the property corresponding toCommonPort.getPortNumber()
.- Returns:
- current value
-
getQueue
Return current value associated with the property corresponding toQueues.getQueue()
.- Returns:
- current value
-
getReason
Return current value associated with the property corresponding toFlowNodeConnector.getReason()
.- Returns:
- current value
-
getState
Return current value associated with the property corresponding toFlowCapablePort.getState()
.- Returns:
- current value
-
getSupported
Return current value associated with the property corresponding toFlowCapablePort.getSupported()
.- Returns:
- current value
-
setAdvertisedFeatures
Set the property corresponding toCommonPort.getAdvertisedFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setConfiguration
Set the property corresponding toCommonPort.getConfiguration()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrentFeature
Set the property corresponding toFlowCapablePort.getCurrentFeature()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrentSpeed
public FlowCapableNodeConnectorUpdatedBuilder setCurrentSpeed(org.opendaylight.yangtools.yang.common.Uint32 value) Set the property corresponding toFlowCapablePort.getCurrentSpeed()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHardwareAddress
public FlowCapableNodeConnectorUpdatedBuilder setHardwareAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value) Set the property corresponding toCommonPort.getHardwareAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaximumSpeed
public FlowCapableNodeConnectorUpdatedBuilder setMaximumSpeed(org.opendaylight.yangtools.yang.common.Uint32 value) Set the property corresponding toFlowCapablePort.getMaximumSpeed()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setName
Set the property corresponding toFlowCapablePort.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPeerFeatures
Set the property corresponding toFlowCapablePort.getPeerFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPortNumber
Set the property corresponding toCommonPort.getPortNumber()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setQueue
Set the property corresponding toQueues.getQueue()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setReason
Set the property corresponding toFlowNodeConnector.getReason()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setState
Set the property corresponding toFlowCapablePort.getState()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSupported
Set the property corresponding toFlowCapablePort.getSupported()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
build
A newFlowCapableNodeConnectorUpdated
instance.- Returns:
- A new
FlowCapableNodeConnectorUpdated
instance.
-