java.lang.Object
org.opendaylight.yang.gen.v1.urn.opendaylight.openflow.oxm.rev150225.match.v10.grouping.MatchV10Builder

@Generated("mdsal-binding-generator") public class MatchV10Builder extends Object
Class that builds MatchV10 instances. Overall design of the class is that of a fluent interface, where method chaining is used.

In general, this class is supposed to be used like this template:

   
     MatchV10 createMatchV10(int fooXyzzy, int barBaz) {
         return new MatchV10Builder()
             .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build())
             .setBar(new BarBuilder().setBaz(barBaz).build())
             .build();
     }
   
 

This pattern is supported by the immutable nature of MatchV10, as instances can be freely passed around without worrying about synchronization issues.

As a side note: method chaining results in:

  • very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is on the stack, so further method invocations just need to fill method arguments for the next method invocation, which is terminated by build(), which is then returned from the method
  • better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
  • better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
See Also:
  • Constructor Details

    • MatchV10Builder

      public MatchV10Builder()
      Construct an empty builder.
    • MatchV10Builder

      public MatchV10Builder(MatchV10 base)
      Construct a builder initialized with state from specified MatchV10.
      Parameters:
      base - MatchV10 from which the builder should be initialized
  • Method Details

    • getDlDst

      public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getDlDst()
      Return current value associated with the property corresponding to MatchV10.getDlDst().
      Returns:
      current value
    • getDlSrc

      public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getDlSrc()
      Return current value associated with the property corresponding to MatchV10.getDlSrc().
      Returns:
      current value
    • getDlType

      public org.opendaylight.yangtools.yang.common.Uint16 getDlType()
      Return current value associated with the property corresponding to MatchV10.getDlType().
      Returns:
      current value
    • getDlVlan

      public org.opendaylight.yangtools.yang.common.Uint16 getDlVlan()
      Return current value associated with the property corresponding to MatchV10.getDlVlan().
      Returns:
      current value
    • getDlVlanPcp

      public org.opendaylight.yangtools.yang.common.Uint8 getDlVlanPcp()
      Return current value associated with the property corresponding to MatchV10.getDlVlanPcp().
      Returns:
      current value
    • getInPort

      public org.opendaylight.yangtools.yang.common.Uint16 getInPort()
      Return current value associated with the property corresponding to MatchV10.getInPort().
      Returns:
      current value
    • getNwDst

      public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address getNwDst()
      Return current value associated with the property corresponding to MatchV10.getNwDst().
      Returns:
      current value
    • getNwDstMask

      public org.opendaylight.yangtools.yang.common.Uint8 getNwDstMask()
      Return current value associated with the property corresponding to MatchV10.getNwDstMask().
      Returns:
      current value
    • getNwProto

      public org.opendaylight.yangtools.yang.common.Uint8 getNwProto()
      Return current value associated with the property corresponding to MatchV10.getNwProto().
      Returns:
      current value
    • getNwSrc

      public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address getNwSrc()
      Return current value associated with the property corresponding to MatchV10.getNwSrc().
      Returns:
      current value
    • getNwSrcMask

      public org.opendaylight.yangtools.yang.common.Uint8 getNwSrcMask()
      Return current value associated with the property corresponding to MatchV10.getNwSrcMask().
      Returns:
      current value
    • getNwTos

      public org.opendaylight.yangtools.yang.common.Uint8 getNwTos()
      Return current value associated with the property corresponding to MatchV10.getNwTos().
      Returns:
      current value
    • getTpDst

      public org.opendaylight.yangtools.yang.common.Uint16 getTpDst()
      Return current value associated with the property corresponding to MatchV10.getTpDst().
      Returns:
      current value
    • getTpSrc

      public org.opendaylight.yangtools.yang.common.Uint16 getTpSrc()
      Return current value associated with the property corresponding to MatchV10.getTpSrc().
      Returns:
      current value
    • getWildcards

      public FlowWildcardsV10 getWildcards()
      Return current value associated with the property corresponding to MatchV10.getWildcards().
      Returns:
      current value
    • augmentation

      public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<MatchV10>> E$$ augmentation(Class<E$$> augmentationType)
      Return the specified augmentation, if it is present in this builder.
      Type Parameters:
      E$$ - augmentation type
      Parameters:
      augmentationType - augmentation type class
      Returns:
      Augmentation object from this builder, or null if not present
      Throws:
      NullPointerException - if augmentType is null
    • setDlDst

      public MatchV10Builder setDlDst(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
      Set the property corresponding to MatchV10.getDlDst() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setDlSrc

      public MatchV10Builder setDlSrc(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
      Set the property corresponding to MatchV10.getDlSrc() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setDlType

      public MatchV10Builder setDlType(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to MatchV10.getDlType() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setDlVlan

      public MatchV10Builder setDlVlan(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to MatchV10.getDlVlan() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setDlVlanPcp

      public MatchV10Builder setDlVlanPcp(org.opendaylight.yangtools.yang.common.Uint8 value)
      Set the property corresponding to MatchV10.getDlVlanPcp() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setInPort

      public MatchV10Builder setInPort(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to MatchV10.getInPort() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setNwDst

      public MatchV10Builder setNwDst(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address value)
      Set the property corresponding to MatchV10.getNwDst() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setNwDstMask

      public MatchV10Builder setNwDstMask(org.opendaylight.yangtools.yang.common.Uint8 value)
      Set the property corresponding to MatchV10.getNwDstMask() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setNwProto

      public MatchV10Builder setNwProto(org.opendaylight.yangtools.yang.common.Uint8 value)
      Set the property corresponding to MatchV10.getNwProto() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setNwSrc

      public MatchV10Builder setNwSrc(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address value)
      Set the property corresponding to MatchV10.getNwSrc() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setNwSrcMask

      public MatchV10Builder setNwSrcMask(org.opendaylight.yangtools.yang.common.Uint8 value)
      Set the property corresponding to MatchV10.getNwSrcMask() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setNwTos

      public MatchV10Builder setNwTos(org.opendaylight.yangtools.yang.common.Uint8 value)
      Set the property corresponding to MatchV10.getNwTos() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setTpDst

      public MatchV10Builder setTpDst(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to MatchV10.getTpDst() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setTpSrc

      public MatchV10Builder setTpSrc(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to MatchV10.getTpSrc() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • setWildcards

      public MatchV10Builder setWildcards(FlowWildcardsV10 value)
      Set the property corresponding to MatchV10.getWildcards() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder
    • addAugmentation

      public MatchV10Builder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<MatchV10> augmentation)
      Add an augmentation to this builder's product.
      Parameters:
      augmentation - augmentation to be added
      Returns:
      this builder
      Throws:
      NullPointerException - if augmentation is null
    • removeAugmentation

      public MatchV10Builder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<MatchV10>> augmentationType)
      Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.
      Parameters:
      augmentationType - augmentation type to be removed
      Returns:
      this builder
    • build

      public @NonNull MatchV10 build()
      A new MatchV10 instance.
      Returns:
      A new MatchV10 instance.