P - Type of path (subtree identifier), which represents location in
treeD - Type of data (payload), which represents data payloadpublic interface AsyncWriteTransaction<P extends org.opendaylight.yangtools.concepts.Path<P>,D> extends AsyncTransaction<P,D>
Initial state of write transaction is a stable snapshot of the current data tree. The state is captured when the transaction is created and its state and underlying data tree are not affected by other concurrently running transactions.
Write transactions are isolated from other concurrent write transactions. All writes are local to the transaction and represent only a proposal of state change for the data tree and it is not visible to any other concurrently running transaction.
Applications make changes to the local data tree in the transaction by via the put, merge, and delete operations.
Performing the following put operations:
1) container { list [ a ] }
2) container { list [ b ] }
will result in the following data being present:
container { list [ b ] }
Performing the following merge operations:
1) container { list [ a ] }
2) container { list [ b ] }
will result in the following data being present:
container { list [ a, b ] }
This also means that storing the container will preserve any
augmentations which have been attached to it.
After applying changes to the local data tree, applications publish the changes proposed in the
transaction by calling submit() on the transaction. This seals the transaction
(preventing any further writes using this transaction) and submits it to be
processed and applied to global conceptual data tree.
The transaction commit may fail due to a concurrent transaction modifying and committing data in
an incompatible way. See submit() for more concrete commit failure examples.
Implementation Note: This interface is not intended to be implemented by users of MD-SAL, but only to be consumed by them.
| Modifier and Type | Method and Description |
|---|---|
boolean |
cancel()
Cancels the transaction.
|
com.google.common.util.concurrent.ListenableFuture<org.opendaylight.yangtools.yang.common.RpcResult<TransactionStatus>> |
commit()
Deprecated.
Use
submit() instead. |
void |
delete(LogicalDatastoreType store,
P path)
Removes a piece of data from specified path.
|
com.google.common.util.concurrent.CheckedFuture<Void,TransactionCommitFailedException> |
submit()
Submits this transaction to be asynchronously applied to update the logical data tree.
|
getIdentifierboolean cancel()
TransactionStatus.NEW or TransactionStatus.SUBMITED
Invoking cancel() on TransactionStatus.FAILED or
TransactionStatus.CANCELED will have no effect, and transaction
is considered cancelled.
Invoking cancel() on finished transaction (future returned by submit()
already completed with TransactionStatus.COMMITED) will always
fail (return false).void delete(LogicalDatastoreType store, P path)
store - Logical data store which should be modifiedpath - Data object pathIllegalStateException - if the transaction is no longer TransactionStatus.NEWcom.google.common.util.concurrent.CheckedFuture<Void,TransactionCommitFailedException> submit()
Note: It is strongly recommended to process the CheckedFuture result in an asynchronous manner rather than using the blocking get() method. See example usage below.
This call logically seals the transaction, which prevents the client from
further changing data tree using this transaction. Any subsequent calls to
delete(LogicalDatastoreType, Path) will fail with
IllegalStateException.
The transaction is marked as TransactionStatus.SUBMITED and
enqueued into the data store back-end for processing.
Whether or not the commit is successful is determined by versioning
of the data tree and validation of registered commit participants
(AsyncConfigurationCommitHandler)
if the transaction changes the data tree.
The effects of a successful commit of data depends on data change listeners
(AsyncDataChangeListener) and commit participants
(AsyncConfigurationCommitHandler) that are registered with the data broker.
private void doWrite( final int tries ) {
WriteTransaction writeTx = dataBroker.newWriteOnlyTransaction();
MyDataObject data = ...;
InstanceIdentifier<MyDataObject> path = ...;
writeTx.put( LogicalDatastoreType.OPERATIONAL, path, data );
Futures.addCallback( writeTx.submit(), new FutureCallback<Void>() {
public void onSuccess( Void result ) {
// succeeded
}
public void onFailure( Throwable t ) {
if( t instanceof OptimisticLockFailedException ) {
if( ( tries - 1 ) > 0 ) {
// do retry
doWrite( tries - 1 );
} else {
// out of retries
}
} else {
// failed due to another type of TransactionCommitFailedException.
}
} );
}
...
doWrite( 2 );
Transaction may fail because of multiple reasons, such as
OptimisticLockFailedException. It is the responsibility of the
caller to create a new transaction and submit the same modification again in
order to update data tree. Warning: In most cases, retrying after an
OptimisticLockFailedException will result in a high probability of success.
However, there are scenarios, albeit unusual, where any number of retries will
not succeed. Therefore it is strongly recommended to limit the number of retries (2 or 3)
to avoid an endless loop.
DataValidationFailedException. User should not retry to
create new transaction with same data, since it probably will fail again.
| Initial state | Tx 1 | Tx 2 | Result |
|---|---|---|---|
| Empty | put(A,1) | put(A,2) | Tx 2 will fail, state is A=1 |
| Empty | put(A,1) | merge(A,2) | A=2 |
| Empty | merge(A,1) | put(A,2) | Tx 2 will fail, state is A=1 |
| Empty | merge(A,1) | merge(A,2) | A=2 |
| A=0 | put(A,1) | put(A,2) | Tx 2 will fail, A=1 |
| A=0 | put(A,1) | merge(A,2) | A=2 |
| A=0 | merge(A,1) | put(A,2) | Tx 2 will fail, A=1 |
| A=0 | merge(A,1) | merge(A,2) | A=2 |
| A=0 | delete(A) | put(A,2) | Tx 2 will fail, A does not exists |
| A=0 | delete(A) | merge(A,2) | A=2 |
| Initial state | Tx 1 | Tx 2 | Result |
|---|---|---|---|
| Empty | put(TOP,[]) | put(TOP,[]) | Tx 2 will fail, state is TOP=[] |
| Empty | put(TOP,[]) | merge(TOP,[]) | TOP=[] |
| Empty | put(TOP,[FOO=1]) | put(TOP,[BAR=1]) | Tx 2 will fail, state is TOP=[FOO=1] |
| Empty | put(TOP,[FOO=1]) | merge(TOP,[BAR=1]) | TOP=[FOO=1,BAR=1] |
| Empty | merge(TOP,[FOO=1]) | put(TOP,[BAR=1]) | Tx 2 will fail, state is TOP=[FOO=1] |
| Empty | merge(TOP,[FOO=1]) | merge(TOP,[BAR=1]) | TOP=[FOO=1,BAR=1] |
| TOP=[] | put(TOP,[FOO=1]) | put(TOP,[BAR=1]) | Tx 2 will fail, state is TOP=[FOO=1] |
| TOP=[] | put(TOP,[FOO=1]) | merge(TOP,[BAR=1]) | state is TOP=[FOO=1,BAR=1] |
| TOP=[] | merge(TOP,[FOO=1]) | put(TOP,[BAR=1]) | Tx 2 will fail, state is TOP=[FOO=1] |
| TOP=[] | merge(TOP,[FOO=1]) | merge(TOP,[BAR=1]) | state is TOP=[FOO=1,BAR=1] |
| TOP=[] | delete(TOP) | put(TOP,[BAR=1]) | Tx 2 will fail, state is empty store |
| TOP=[] | delete(TOP) | merge(TOP,[BAR=1]) | state is TOP=[BAR=1] |
| TOP=[] | put(TOP/FOO,1) | put(TOP/BAR,1]) | state is TOP=[FOO=1,BAR=1] |
| TOP=[] | put(TOP/FOO,1) | merge(TOP/BAR,1) | state is TOP=[FOO=1,BAR=1] |
| TOP=[] | merge(TOP/FOO,1) | put(TOP/BAR,1) | state is TOP=[FOO=1,BAR=1] |
| TOP=[] | merge(TOP/FOO,1) | merge(TOP/BAR,1) | state is TOP=[FOO=1,BAR=1] |
| TOP=[] | delete(TOP) | put(TOP/BAR,1) | Tx 2 will fail, state is empty store |
| TOP=[] | delete(TOP) | merge(TOP/BAR,1] | Tx 2 will fail, state is empty store |
| TOP=[FOO=1] | put(TOP/FOO,2) | put(TOP/BAR,1) | state is TOP=[FOO=2,BAR=1] |
| TOP=[FOO=1] | put(TOP/FOO,2) | merge(TOP/BAR,1) | state is TOP=[FOO=2,BAR=1] |
| TOP=[FOO=1] | merge(TOP/FOO,2) | put(TOP/BAR,1) | state is TOP=[FOO=2,BAR=1] |
| TOP=[FOO=1] | merge(TOP/FOO,2) | merge(TOP/BAR,1) | state is TOP=[FOO=2,BAR=1] |
| TOP=[FOO=1] | delete(TOP/FOO) | put(TOP/BAR,1) | state is TOP=[BAR=1] |
| TOP=[FOO=1] | delete(TOP/FOO) | merge(TOP/BAR,1] | state is TOP=[BAR=1] |
txA = broker.newWriteTransaction(); // allocates new transaction, data tree is empty txB = broker.newWriteTransaction(); // allocates new transaction, data tree is empty txA.put(CONFIGURATION, PATH, A); // writes to PATH value A txB.put(CONFIGURATION, PATH, B) // writes to PATH value B ListenableFuture futureA = txA.submit(); // transaction A is sealed and submitted ListenebleFuture futureB = txB.submit(); // transaction B is sealed and submittedCommit of transaction A will be processed asynchronously and data tree will be updated to contain value
A for PATH.
Returned ListenableFuture will successfully complete once
state is applied to data tree.
Commit of Transaction B will fail, because previous transaction also
modified path in a concurrent way. The state introduced by transaction B
will not be applied. Returned ListenableFuture object will fail
with OptimisticLockFailedException exception, which indicates to
client that concurrent transaction prevented the submitted transaction from being
applied.
TransactionCommitFailedException or an exception
derived from TransactionCommitFailedException.IllegalStateException - if the transaction is not TransactionStatus.NEW@Deprecated com.google.common.util.concurrent.ListenableFuture<org.opendaylight.yangtools.yang.common.RpcResult<TransactionStatus>> commit()
submit() instead.Copyright © 2019 OpenDaylight. All rights reserved.