Class FlowspecL3vpnRouteBuilder
java.lang.Object
org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.flowspec.rev200120.flowspec.l3vpn.ipv6.route.FlowspecL3vpnRouteBuilder
Class that builds
FlowspecL3vpnRoute
instances. Overall design of the class is that of a
fluent interface, where method chaining is used.
In general, this class is supposed to be used like this template:
FlowspecL3vpnRoute createFlowspecL3vpnRoute(int fooXyzzy, int barBaz) {
return new FlowspecL3vpnRouteBuilder()
.setFoo(new FooBuilder().setXyzzy(fooXyzzy).build())
.setBar(new BarBuilder().setBaz(barBaz).build())
.build();
}
This pattern is supported by the immutable nature of FlowspecL3vpnRoute, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
-
Constructor Summary
ConstructorDescriptionConstruct an empty builder.Construct a new builder initialized from specifiedBgpRibRoute
.Construct a builder initialized with state from specifiedFlowspecL3vpnRoute
.Construct a new builder initialized from specifiedFlowspecDestination
.Construct a new builder initialized from specifiedFlowspecDestinationGroupIpv6
.Construct a new builder initialized from specifiedFlowspecIpv6RouteList
.Construct a new builder initialized from specifiedPathAttributes
.Construct a new builder initialized from specifiedPathIdGrouping
.Construct a new builder initialized from specifiedRoute
.Construct a new builder initialized from specifiedRouteDistinguisherGrouping
. -
Method Summary
Modifier and TypeMethodDescriptionaddAugmentation
(org.opendaylight.yangtools.yang.binding.Augmentation<FlowspecL3vpnRoute> augmentation) Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowspecL3vpnRoute>>
E$$augmentation
(Class<E$$> augmentationType) Return the specified augmentation, if it is present in this builder.@NonNull FlowspecL3vpnRoute
build()
A newFlowspecL3vpnRoute
instance.void
fieldsFrom
(org.opendaylight.yangtools.yang.binding.DataObject arg) Set fields from given grouping argument.Return current value associated with the property corresponding toPathAttributes.getAttributes()
.Return current value associated with the property corresponding toFlowspecDestination.getFlowspec()
.Return current value associated with the property corresponding toPathIdGrouping.getPathId()
.Return current value associated with the property corresponding toRouteDistinguisherGrouping.getRouteDistinguisher()
.Return current value associated with the property corresponding toRoute.getRouteKey()
.key()
Return current value associated with the property corresponding toFlowspecL3vpnRoute.key()
.removeAugmentation
(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowspecL3vpnRoute>> augmentationType) Remove an augmentation from this builder's product.setAttributes
(Attributes value) Set the property corresponding toPathAttributes.getAttributes()
to the specified value.setFlowspec
(List<Flowspec> values) Set the property corresponding toFlowspecDestination.getFlowspec()
to the specified value.Set the property corresponding toPathIdGrouping.getPathId()
to the specified value.Set the property corresponding toRouteDistinguisherGrouping.getRouteDistinguisher()
to the specified value.setRouteKey
(String value) Set the property corresponding toRoute.getRouteKey()
to the specified value.Set the key value corresponding toFlowspecL3vpnRoute.key()
to the specified value.
-
Constructor Details
-
FlowspecL3vpnRouteBuilder
public FlowspecL3vpnRouteBuilder()Construct an empty builder. -
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedFlowspecIpv6RouteList
.- Parameters:
arg
- FlowspecIpv6RouteList from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedFlowspecDestinationGroupIpv6
.- Parameters:
arg
- FlowspecDestinationGroupIpv6 from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedFlowspecDestination
.- Parameters:
arg
- FlowspecDestination from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedBgpRibRoute
.- Parameters:
arg
- BgpRibRoute from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedRoute
.- Parameters:
arg
- Route from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedPathIdGrouping
.- Parameters:
arg
- PathIdGrouping from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedPathAttributes
.- Parameters:
arg
- PathAttributes from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a new builder initialized from specifiedRouteDistinguisherGrouping
.- Parameters:
arg
- RouteDistinguisherGrouping from which the builder should be initialized
-
FlowspecL3vpnRouteBuilder
Construct a builder initialized with state from specifiedFlowspecL3vpnRoute
.- Parameters:
base
- FlowspecL3vpnRoute from which the builder should be initialized
-
-
Method Details
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg) Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
key
Return current value associated with the property corresponding toFlowspecL3vpnRoute.key()
.- Returns:
- current value
-
getAttributes
Return current value associated with the property corresponding toPathAttributes.getAttributes()
.- Returns:
- current value
-
getFlowspec
Return current value associated with the property corresponding toFlowspecDestination.getFlowspec()
.- Returns:
- current value
-
getPathId
Return current value associated with the property corresponding toPathIdGrouping.getPathId()
.- Returns:
- current value
-
getRouteDistinguisher
Return current value associated with the property corresponding toRouteDistinguisherGrouping.getRouteDistinguisher()
.- Returns:
- current value
-
getRouteKey
Return current value associated with the property corresponding toRoute.getRouteKey()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowspecL3vpnRoute>> E$$ augmentation(Class<E$$> augmentationType) Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
withKey
Set the key value corresponding toFlowspecL3vpnRoute.key()
to the specified value.- Parameters:
key
- desired value- Returns:
- this builder
-
setAttributes
Set the property corresponding toPathAttributes.getAttributes()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowspec
Set the property corresponding toFlowspecDestination.getFlowspec()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setPathId
Set the property corresponding toPathIdGrouping.getPathId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRouteDistinguisher
Set the property corresponding toRouteDistinguisherGrouping.getRouteDistinguisher()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRouteKey
Set the property corresponding toRoute.getRouteKey()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public FlowspecL3vpnRouteBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowspecL3vpnRoute> augmentation) Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public FlowspecL3vpnRouteBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowspecL3vpnRoute>> augmentationType) Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
A newFlowspecL3vpnRoute
instance.- Returns:
- A new
FlowspecL3vpnRoute
instance.
-