Class IgpNodeAttributesBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.IgpNodeAttributesBuilder
-
@Generated("mdsal-binding-generator") public class IgpNodeAttributesBuilder extends Object
Class that buildsIgpNodeAttributes
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
IgpNodeAttributes createIgpNodeAttributes(int fooXyzzy, int barBaz) { return new IgpNodeAttributesBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of IgpNodeAttributes, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
IgpNodeAttributes
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description IgpNodeAttributesBuilder()
Construct an empty builder.IgpNodeAttributesBuilder(IgpNodeAttributes base)
Construct a builder initialized with state from specifiedIgpNodeAttributes
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description IgpNodeAttributesBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<IgpNodeAttributes> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<IgpNodeAttributes>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull IgpNodeAttributes
build()
A newIgpNodeAttributes
instance.Set<Class<? extends FlagIdentity>>
getFlag()
Return current value associated with the property corresponding toIgpNodeAttributes.getFlag()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.DomainName
getName()
Return current value associated with the property corresponding toIgpNodeAttributes.getName()
.Map<PrefixKey,Prefix>
getPrefix()
Return current value associated with the property corresponding toIgpNodeAttributes.getPrefix()
.Set<org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress>
getRouterId()
Return current value associated with the property corresponding toIgpNodeAttributes.getRouterId()
.IgpNodeAttributesBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<IgpNodeAttributes>> augmentationType)
Remove an augmentation from this builder's product.IgpNodeAttributesBuilder
setFlag(Set<Class<? extends FlagIdentity>> values)
Set the property corresponding toIgpNodeAttributes.getFlag()
to the specified value.IgpNodeAttributesBuilder
setName(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.DomainName value)
Set the property corresponding toIgpNodeAttributes.getName()
to the specified value.IgpNodeAttributesBuilder
setPrefix(Map<PrefixKey,Prefix> values)
Set the property corresponding toIgpNodeAttributes.getPrefix()
to the specified value.IgpNodeAttributesBuilder
setRouterId(Set<org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress> values)
Set the property corresponding toIgpNodeAttributes.getRouterId()
to the specified value.
-
-
-
Constructor Detail
-
IgpNodeAttributesBuilder
public IgpNodeAttributesBuilder()
Construct an empty builder.
-
IgpNodeAttributesBuilder
public IgpNodeAttributesBuilder(IgpNodeAttributes base)
Construct a builder initialized with state from specifiedIgpNodeAttributes
.- Parameters:
base
- IgpNodeAttributes from which the builder should be initialized
-
-
Method Detail
-
getFlag
public Set<Class<? extends FlagIdentity>> getFlag()
Return current value associated with the property corresponding toIgpNodeAttributes.getFlag()
.- Returns:
- current value
-
getName
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.DomainName getName()
Return current value associated with the property corresponding toIgpNodeAttributes.getName()
.- Returns:
- current value
-
getPrefix
public Map<PrefixKey,Prefix> getPrefix()
Return current value associated with the property corresponding toIgpNodeAttributes.getPrefix()
.- Returns:
- current value
-
getRouterId
public Set<org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress> getRouterId()
Return current value associated with the property corresponding toIgpNodeAttributes.getRouterId()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<IgpNodeAttributes>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setFlag
public IgpNodeAttributesBuilder setFlag(Set<Class<? extends FlagIdentity>> values)
Set the property corresponding toIgpNodeAttributes.getFlag()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setName
public IgpNodeAttributesBuilder setName(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.DomainName value)
Set the property corresponding toIgpNodeAttributes.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPrefix
public IgpNodeAttributesBuilder setPrefix(Map<PrefixKey,Prefix> values)
Set the property corresponding toIgpNodeAttributes.getPrefix()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setRouterId
public IgpNodeAttributesBuilder setRouterId(Set<org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress> values)
Set the property corresponding toIgpNodeAttributes.getRouterId()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
addAugmentation
public IgpNodeAttributesBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<IgpNodeAttributes> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public IgpNodeAttributesBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<IgpNodeAttributes>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull IgpNodeAttributes build()
A newIgpNodeAttributes
instance.- Returns:
- A new
IgpNodeAttributes
instance.
-
-