Class PcepUpdateTunnelInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.tunnel.pcep.programming.rev181109.PcepUpdateTunnelInputBuilder
-
@Generated("mdsal-binding-generator") public class PcepUpdateTunnelInputBuilder extends Object
Class that buildsPcepUpdateTunnelInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
PcepUpdateTunnelInput createPcepUpdateTunnelInput(int fooXyzzy, int barBaz) { return new PcepUpdateTunnelInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of PcepUpdateTunnelInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
PcepUpdateTunnelInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description PcepUpdateTunnelInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PcepUpdateTunnelInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepUpdateTunnelInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull PcepUpdateTunnelInput
build()
A newPcepUpdateTunnelInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Bandwidth
getBandwidth()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
.ClassType
getClassType()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
.Nanotime
getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.AttributeFilter
getExcludeAny()
Return current value associated with the property corresponding toAttributeFilters.getExcludeAny()
.Map<ExplicitHopsKey,ExplicitHops>
getExplicitHops()
Return current value associated with the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
.org.opendaylight.yangtools.yang.common.Uint8
getHoldPriority()
Return current value associated with the property corresponding toPriority.getHoldPriority()
.InstructionId
getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.AttributeFilter
getIncludeAll()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAll()
.AttributeFilter
getIncludeAny()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAny()
.Boolean
getLabelRecordingDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLabelRecordingDesired()
.org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.LinkId
getLinkId()
Return current value associated with the property corresponding toBaseTunnelInput.getLinkId()
.Boolean
getLocalProtectionDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLocalProtectionDesired()
.NetworkTopologyRef
getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.Set<InstructionId>
getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.String
getSessionName()
Return current value associated with the property corresponding toTunnelAttributes.getSessionName()
.Boolean
getSeStyleDesired()
Return current value associated with the property corresponding toTunnelAttributes.getSeStyleDesired()
.org.opendaylight.yangtools.yang.common.Uint8
getSetupPriority()
Return current value associated with the property corresponding toPriority.getSetupPriority()
.String
getSymbolicPathName()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
.PcepUpdateTunnelInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepUpdateTunnelInput>> augmentationType)
Remove an augmentation from this builder's product.PcepUpdateTunnelInputBuilder
setBandwidth(Bandwidth value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
to the specified value.PcepUpdateTunnelInputBuilder
setClassType(ClassType value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
to the specified value.PcepUpdateTunnelInputBuilder
setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.PcepUpdateTunnelInputBuilder
setExcludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getExcludeAny()
to the specified value.PcepUpdateTunnelInputBuilder
setExplicitHops(Map<ExplicitHopsKey,ExplicitHops> values)
Set the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
to the specified value.PcepUpdateTunnelInputBuilder
setHoldPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getHoldPriority()
to the specified value.PcepUpdateTunnelInputBuilder
setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.PcepUpdateTunnelInputBuilder
setIncludeAll(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAll()
to the specified value.PcepUpdateTunnelInputBuilder
setIncludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAny()
to the specified value.PcepUpdateTunnelInputBuilder
setLabelRecordingDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLabelRecordingDesired()
to the specified value.PcepUpdateTunnelInputBuilder
setLinkId(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.LinkId value)
Set the property corresponding toBaseTunnelInput.getLinkId()
to the specified value.PcepUpdateTunnelInputBuilder
setLocalProtectionDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLocalProtectionDesired()
to the specified value.PcepUpdateTunnelInputBuilder
setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.PcepUpdateTunnelInputBuilder
setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.PcepUpdateTunnelInputBuilder
setSessionName(String value)
Set the property corresponding toTunnelAttributes.getSessionName()
to the specified value.PcepUpdateTunnelInputBuilder
setSeStyleDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getSeStyleDesired()
to the specified value.PcepUpdateTunnelInputBuilder
setSetupPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getSetupPriority()
to the specified value.PcepUpdateTunnelInputBuilder
setSymbolicPathName(String value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
to the specified value.
-
-
-
Constructor Detail
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder()
Construct an empty builder.
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(BaseTunnelInput arg)
Construct a new builder initialized from specifiedBaseTunnelInput
.- Parameters:
arg
- BaseTunnelInput from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(TopologyInstructionInput arg)
Construct a new builder initialized from specifiedTopologyInstructionInput
.- Parameters:
arg
- TopologyInstructionInput from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(SubmitInstructionInput arg)
Construct a new builder initialized from specifiedSubmitInstructionInput
.- Parameters:
arg
- SubmitInstructionInput from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.- Parameters:
arg
- NetworkTopologyReference from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(TunnelP2pPathCfgAttributes arg)
Construct a new builder initialized from specifiedTunnelP2pPathCfgAttributes
.- Parameters:
arg
- TunnelP2pPathCfgAttributes from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(TunnelPcepLinkCfgAttributes arg)
Construct a new builder initialized from specifiedTunnelPcepLinkCfgAttributes
.- Parameters:
arg
- TunnelPcepLinkCfgAttributes from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(TunnelAttributes arg)
Construct a new builder initialized from specifiedTunnelAttributes
.- Parameters:
arg
- TunnelAttributes from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(Priority arg)
Construct a new builder initialized from specifiedPriority
.- Parameters:
arg
- Priority from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(AttributeFilters arg)
Construct a new builder initialized from specifiedAttributeFilters
.- Parameters:
arg
- AttributeFilters from which the builder should be initialized
-
PcepUpdateTunnelInputBuilder
public PcepUpdateTunnelInputBuilder(PcepUpdateTunnelInput base)
Construct a builder initialized with state from specifiedPcepUpdateTunnelInput
.- Parameters:
base
- PcepUpdateTunnelInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBandwidth
public Bandwidth getBandwidth()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
.- Returns:
- current value
-
getClassType
public ClassType getClassType()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
.- Returns:
- current value
-
getDeadline
public Nanotime getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.- Returns:
- current value
-
getExcludeAny
public AttributeFilter getExcludeAny()
Return current value associated with the property corresponding toAttributeFilters.getExcludeAny()
.- Returns:
- current value
-
getExplicitHops
public Map<ExplicitHopsKey,ExplicitHops> getExplicitHops()
Return current value associated with the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
.- Returns:
- current value
-
getHoldPriority
public org.opendaylight.yangtools.yang.common.Uint8 getHoldPriority()
Return current value associated with the property corresponding toPriority.getHoldPriority()
.- Returns:
- current value
-
getId
public InstructionId getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.- Returns:
- current value
-
getIncludeAll
public AttributeFilter getIncludeAll()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAll()
.- Returns:
- current value
-
getIncludeAny
public AttributeFilter getIncludeAny()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAny()
.- Returns:
- current value
-
getLabelRecordingDesired
public Boolean getLabelRecordingDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLabelRecordingDesired()
.- Returns:
- current value
-
getLinkId
public org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.LinkId getLinkId()
Return current value associated with the property corresponding toBaseTunnelInput.getLinkId()
.- Returns:
- current value
-
getLocalProtectionDesired
public Boolean getLocalProtectionDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLocalProtectionDesired()
.- Returns:
- current value
-
getNetworkTopologyRef
public NetworkTopologyRef getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.- Returns:
- current value
-
getPreconditions
public Set<InstructionId> getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.- Returns:
- current value
-
getSeStyleDesired
public Boolean getSeStyleDesired()
Return current value associated with the property corresponding toTunnelAttributes.getSeStyleDesired()
.- Returns:
- current value
-
getSessionName
public String getSessionName()
Return current value associated with the property corresponding toTunnelAttributes.getSessionName()
.- Returns:
- current value
-
getSetupPriority
public org.opendaylight.yangtools.yang.common.Uint8 getSetupPriority()
Return current value associated with the property corresponding toPriority.getSetupPriority()
.- Returns:
- current value
-
getSymbolicPathName
public String getSymbolicPathName()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepUpdateTunnelInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBandwidth
public PcepUpdateTunnelInputBuilder setBandwidth(Bandwidth value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setClassType
public PcepUpdateTunnelInputBuilder setClassType(ClassType value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDeadline
public PcepUpdateTunnelInputBuilder setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setExcludeAny
public PcepUpdateTunnelInputBuilder setExcludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getExcludeAny()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setExplicitHops
public PcepUpdateTunnelInputBuilder setExplicitHops(Map<ExplicitHopsKey,ExplicitHops> values)
Set the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setHoldPriority
public PcepUpdateTunnelInputBuilder setHoldPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getHoldPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setId
public PcepUpdateTunnelInputBuilder setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIncludeAll
public PcepUpdateTunnelInputBuilder setIncludeAll(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAll()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIncludeAny
public PcepUpdateTunnelInputBuilder setIncludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAny()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLabelRecordingDesired
public PcepUpdateTunnelInputBuilder setLabelRecordingDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLabelRecordingDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLinkId
public PcepUpdateTunnelInputBuilder setLinkId(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.LinkId value)
Set the property corresponding toBaseTunnelInput.getLinkId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLocalProtectionDesired
public PcepUpdateTunnelInputBuilder setLocalProtectionDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLocalProtectionDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNetworkTopologyRef
public PcepUpdateTunnelInputBuilder setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPreconditions
public PcepUpdateTunnelInputBuilder setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setSeStyleDesired
public PcepUpdateTunnelInputBuilder setSeStyleDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getSeStyleDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSessionName
public PcepUpdateTunnelInputBuilder setSessionName(String value)
Set the property corresponding toTunnelAttributes.getSessionName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSetupPriority
public PcepUpdateTunnelInputBuilder setSetupPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getSetupPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSymbolicPathName
public PcepUpdateTunnelInputBuilder setSymbolicPathName(String value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public PcepUpdateTunnelInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PcepUpdateTunnelInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public PcepUpdateTunnelInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepUpdateTunnelInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull PcepUpdateTunnelInput build()
A newPcepUpdateTunnelInput
instance.- Returns:
- A new
PcepUpdateTunnelInput
instance.
-
-