Class PcepCreateP2pTunnelInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.tunnel.pcep.programming.rev181109.PcepCreateP2pTunnelInputBuilder
-
@Generated("mdsal-binding-generator") public class PcepCreateP2pTunnelInputBuilder extends Object
Class that buildsPcepCreateP2pTunnelInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
PcepCreateP2pTunnelInput createPcepCreateP2pTunnelInput(int fooXyzzy, int barBaz) { return new PcepCreateP2pTunnelInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of PcepCreateP2pTunnelInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
PcepCreateP2pTunnelInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description PcepCreateP2pTunnelInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PcepCreateP2pTunnelInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepCreateP2pTunnelInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull PcepCreateP2pTunnelInput
build()
A newPcepCreateP2pTunnelInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Bandwidth
getBandwidth()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
.ClassType
getClassType()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
.Nanotime
getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.Destination
getDestination()
Return current value associated with the property corresponding toCreateP2pTunnelInput.getDestination()
.AttributeFilter
getExcludeAny()
Return current value associated with the property corresponding toAttributeFilters.getExcludeAny()
.Map<ExplicitHopsKey,ExplicitHops>
getExplicitHops()
Return current value associated with the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
.org.opendaylight.yangtools.yang.common.Uint8
getHoldPriority()
Return current value associated with the property corresponding toPriority.getHoldPriority()
.InstructionId
getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.AttributeFilter
getIncludeAll()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAll()
.AttributeFilter
getIncludeAny()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAny()
.Boolean
getLabelRecordingDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLabelRecordingDesired()
.Boolean
getLocalProtectionDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLocalProtectionDesired()
.NetworkTopologyRef
getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.Set<InstructionId>
getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.String
getSessionName()
Return current value associated with the property corresponding toTunnelAttributes.getSessionName()
.Boolean
getSeStyleDesired()
Return current value associated with the property corresponding toTunnelAttributes.getSeStyleDesired()
.org.opendaylight.yangtools.yang.common.Uint8
getSetupPriority()
Return current value associated with the property corresponding toPriority.getSetupPriority()
.Source
getSource()
Return current value associated with the property corresponding toCreateP2pTunnelInput.getSource()
.String
getSymbolicPathName()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
.PcepCreateP2pTunnelInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepCreateP2pTunnelInput>> augmentationType)
Remove an augmentation from this builder's product.PcepCreateP2pTunnelInputBuilder
setBandwidth(Bandwidth value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
to the specified value.PcepCreateP2pTunnelInputBuilder
setClassType(ClassType value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
to the specified value.PcepCreateP2pTunnelInputBuilder
setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.PcepCreateP2pTunnelInputBuilder
setDestination(Destination value)
Set the property corresponding toCreateP2pTunnelInput.getDestination()
to the specified value.PcepCreateP2pTunnelInputBuilder
setExcludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getExcludeAny()
to the specified value.PcepCreateP2pTunnelInputBuilder
setExplicitHops(Map<ExplicitHopsKey,ExplicitHops> values)
Set the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
to the specified value.PcepCreateP2pTunnelInputBuilder
setHoldPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getHoldPriority()
to the specified value.PcepCreateP2pTunnelInputBuilder
setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.PcepCreateP2pTunnelInputBuilder
setIncludeAll(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAll()
to the specified value.PcepCreateP2pTunnelInputBuilder
setIncludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAny()
to the specified value.PcepCreateP2pTunnelInputBuilder
setLabelRecordingDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLabelRecordingDesired()
to the specified value.PcepCreateP2pTunnelInputBuilder
setLocalProtectionDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLocalProtectionDesired()
to the specified value.PcepCreateP2pTunnelInputBuilder
setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.PcepCreateP2pTunnelInputBuilder
setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.PcepCreateP2pTunnelInputBuilder
setSessionName(String value)
Set the property corresponding toTunnelAttributes.getSessionName()
to the specified value.PcepCreateP2pTunnelInputBuilder
setSeStyleDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getSeStyleDesired()
to the specified value.PcepCreateP2pTunnelInputBuilder
setSetupPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getSetupPriority()
to the specified value.PcepCreateP2pTunnelInputBuilder
setSource(Source value)
Set the property corresponding toCreateP2pTunnelInput.getSource()
to the specified value.PcepCreateP2pTunnelInputBuilder
setSymbolicPathName(String value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
to the specified value.
-
-
-
Constructor Detail
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder()
Construct an empty builder.
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(CreateP2pTunnelInput arg)
Construct a new builder initialized from specifiedCreateP2pTunnelInput
.- Parameters:
arg
- CreateP2pTunnelInput from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(CreateTunnelInput arg)
Construct a new builder initialized from specifiedCreateTunnelInput
.- Parameters:
arg
- CreateTunnelInput from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(TopologyInstructionInput arg)
Construct a new builder initialized from specifiedTopologyInstructionInput
.- Parameters:
arg
- TopologyInstructionInput from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(SubmitInstructionInput arg)
Construct a new builder initialized from specifiedSubmitInstructionInput
.- Parameters:
arg
- SubmitInstructionInput from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.- Parameters:
arg
- NetworkTopologyReference from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(TunnelP2pPathCfgAttributes arg)
Construct a new builder initialized from specifiedTunnelP2pPathCfgAttributes
.- Parameters:
arg
- TunnelP2pPathCfgAttributes from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(TunnelPcepLinkCfgAttributes arg)
Construct a new builder initialized from specifiedTunnelPcepLinkCfgAttributes
.- Parameters:
arg
- TunnelPcepLinkCfgAttributes from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(TunnelAttributes arg)
Construct a new builder initialized from specifiedTunnelAttributes
.- Parameters:
arg
- TunnelAttributes from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(Priority arg)
Construct a new builder initialized from specifiedPriority
.- Parameters:
arg
- Priority from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(AttributeFilters arg)
Construct a new builder initialized from specifiedAttributeFilters
.- Parameters:
arg
- AttributeFilters from which the builder should be initialized
-
PcepCreateP2pTunnelInputBuilder
public PcepCreateP2pTunnelInputBuilder(PcepCreateP2pTunnelInput base)
Construct a builder initialized with state from specifiedPcepCreateP2pTunnelInput
.- Parameters:
base
- PcepCreateP2pTunnelInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBandwidth
public Bandwidth getBandwidth()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
.- Returns:
- current value
-
getClassType
public ClassType getClassType()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
.- Returns:
- current value
-
getDeadline
public Nanotime getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.- Returns:
- current value
-
getDestination
public Destination getDestination()
Return current value associated with the property corresponding toCreateP2pTunnelInput.getDestination()
.- Returns:
- current value
-
getExcludeAny
public AttributeFilter getExcludeAny()
Return current value associated with the property corresponding toAttributeFilters.getExcludeAny()
.- Returns:
- current value
-
getExplicitHops
public Map<ExplicitHopsKey,ExplicitHops> getExplicitHops()
Return current value associated with the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
.- Returns:
- current value
-
getHoldPriority
public org.opendaylight.yangtools.yang.common.Uint8 getHoldPriority()
Return current value associated with the property corresponding toPriority.getHoldPriority()
.- Returns:
- current value
-
getId
public InstructionId getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.- Returns:
- current value
-
getIncludeAll
public AttributeFilter getIncludeAll()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAll()
.- Returns:
- current value
-
getIncludeAny
public AttributeFilter getIncludeAny()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAny()
.- Returns:
- current value
-
getLabelRecordingDesired
public Boolean getLabelRecordingDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLabelRecordingDesired()
.- Returns:
- current value
-
getLocalProtectionDesired
public Boolean getLocalProtectionDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLocalProtectionDesired()
.- Returns:
- current value
-
getNetworkTopologyRef
public NetworkTopologyRef getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.- Returns:
- current value
-
getPreconditions
public Set<InstructionId> getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.- Returns:
- current value
-
getSeStyleDesired
public Boolean getSeStyleDesired()
Return current value associated with the property corresponding toTunnelAttributes.getSeStyleDesired()
.- Returns:
- current value
-
getSessionName
public String getSessionName()
Return current value associated with the property corresponding toTunnelAttributes.getSessionName()
.- Returns:
- current value
-
getSetupPriority
public org.opendaylight.yangtools.yang.common.Uint8 getSetupPriority()
Return current value associated with the property corresponding toPriority.getSetupPriority()
.- Returns:
- current value
-
getSource
public Source getSource()
Return current value associated with the property corresponding toCreateP2pTunnelInput.getSource()
.- Returns:
- current value
-
getSymbolicPathName
public String getSymbolicPathName()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepCreateP2pTunnelInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBandwidth
public PcepCreateP2pTunnelInputBuilder setBandwidth(Bandwidth value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setClassType
public PcepCreateP2pTunnelInputBuilder setClassType(ClassType value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDeadline
public PcepCreateP2pTunnelInputBuilder setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDestination
public PcepCreateP2pTunnelInputBuilder setDestination(Destination value)
Set the property corresponding toCreateP2pTunnelInput.getDestination()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setExcludeAny
public PcepCreateP2pTunnelInputBuilder setExcludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getExcludeAny()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setExplicitHops
public PcepCreateP2pTunnelInputBuilder setExplicitHops(Map<ExplicitHopsKey,ExplicitHops> values)
Set the property corresponding toTunnelP2pPathCfgAttributes.getExplicitHops()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setHoldPriority
public PcepCreateP2pTunnelInputBuilder setHoldPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getHoldPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setId
public PcepCreateP2pTunnelInputBuilder setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIncludeAll
public PcepCreateP2pTunnelInputBuilder setIncludeAll(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAll()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIncludeAny
public PcepCreateP2pTunnelInputBuilder setIncludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAny()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLabelRecordingDesired
public PcepCreateP2pTunnelInputBuilder setLabelRecordingDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLabelRecordingDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLocalProtectionDesired
public PcepCreateP2pTunnelInputBuilder setLocalProtectionDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLocalProtectionDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNetworkTopologyRef
public PcepCreateP2pTunnelInputBuilder setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPreconditions
public PcepCreateP2pTunnelInputBuilder setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setSeStyleDesired
public PcepCreateP2pTunnelInputBuilder setSeStyleDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getSeStyleDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSessionName
public PcepCreateP2pTunnelInputBuilder setSessionName(String value)
Set the property corresponding toTunnelAttributes.getSessionName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSetupPriority
public PcepCreateP2pTunnelInputBuilder setSetupPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getSetupPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSource
public PcepCreateP2pTunnelInputBuilder setSource(Source value)
Set the property corresponding toCreateP2pTunnelInput.getSource()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSymbolicPathName
public PcepCreateP2pTunnelInputBuilder setSymbolicPathName(String value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public PcepCreateP2pTunnelInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PcepCreateP2pTunnelInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public PcepCreateP2pTunnelInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PcepCreateP2pTunnelInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull PcepCreateP2pTunnelInput build()
A newPcepCreateP2pTunnelInput
instance.- Returns:
- A new
PcepCreateP2pTunnelInput
instance.
-
-