Class RemoveLspInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.rev200120.RemoveLspInputBuilder
-
@Generated("mdsal-binding-generator") public class RemoveLspInputBuilder extends Object
Class that buildsRemoveLspInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
RemoveLspInput createRemoveLspInput(int fooXyzzy, int barBaz) { return new RemoveLspInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of RemoveLspInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
RemoveLspInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description RemoveLspInputBuilder()
Construct an empty builder.RemoveLspInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.RemoveLspInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.RemoveLspInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.RemoveLspInputBuilder(RemoveLspArgs arg)
Construct a new builder initialized from specifiedRemoveLspArgs
.RemoveLspInputBuilder(RemoveLspInput base)
Construct a builder initialized with state from specifiedRemoveLspInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description RemoveLspInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<RemoveLspInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveLspInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull RemoveLspInput
build()
A newRemoveLspInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.String
getName()
Return current value associated with the property corresponding toLspId.getName()
.NetworkTopologyRef
getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId
getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.RemoveLspInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveLspInput>> augmentationType)
Remove an augmentation from this builder's product.RemoveLspInputBuilder
setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.RemoveLspInputBuilder
setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.RemoveLspInputBuilder
setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.
-
-
-
Constructor Detail
-
RemoveLspInputBuilder
public RemoveLspInputBuilder()
Construct an empty builder.
-
RemoveLspInputBuilder
public RemoveLspInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.- Parameters:
arg
- NetworkTopologyReference from which the builder should be initialized
-
RemoveLspInputBuilder
public RemoveLspInputBuilder(RemoveLspArgs arg)
Construct a new builder initialized from specifiedRemoveLspArgs
.- Parameters:
arg
- RemoveLspArgs from which the builder should be initialized
-
RemoveLspInputBuilder
public RemoveLspInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.- Parameters:
arg
- LspId from which the builder should be initialized
-
RemoveLspInputBuilder
public RemoveLspInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.rev200120.NodeId from which the builder should be initialized
-
RemoveLspInputBuilder
public RemoveLspInputBuilder(RemoveLspInput base)
Construct a builder initialized with state from specifiedRemoveLspInput
.- Parameters:
base
- RemoveLspInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getName
public String getName()
Return current value associated with the property corresponding toLspId.getName()
.- Returns:
- current value
-
getNetworkTopologyRef
public NetworkTopologyRef getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.- Returns:
- current value
-
getNode
public org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveLspInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setName
public RemoveLspInputBuilder setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNetworkTopologyRef
public RemoveLspInputBuilder setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNode
public RemoveLspInputBuilder setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public RemoveLspInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<RemoveLspInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public RemoveLspInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveLspInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull RemoveLspInput build()
A newRemoveLspInput
instance.- Returns:
- A new
RemoveLspInput
instance.
-
-