Class AddLspInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.rev200120.AddLspInputBuilder
-
@Generated("mdsal-binding-generator") public class AddLspInputBuilder extends Object
Class that buildsAddLspInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
AddLspInput createAddLspInput(int fooXyzzy, int barBaz) { return new AddLspInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of AddLspInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
AddLspInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description AddLspInputBuilder()
Construct an empty builder.AddLspInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.AddLspInputBuilder(AddLspArgs arg)
Construct a new builder initialized from specifiedAddLspArgs
.AddLspInputBuilder(AddLspInput base)
Construct a builder initialized with state from specifiedAddLspInput
.AddLspInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.AddLspInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description AddLspInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddLspInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddLspInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull AddLspInput
build()
A newAddLspInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Arguments
getArguments()
Return current value associated with the property corresponding toAddLspArgs.getArguments()
.String
getName()
Return current value associated with the property corresponding toLspId.getName()
.NetworkTopologyRef
getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId
getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.AddLspInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddLspInput>> augmentationType)
Remove an augmentation from this builder's product.AddLspInputBuilder
setArguments(Arguments value)
Set the property corresponding toAddLspArgs.getArguments()
to the specified value.AddLspInputBuilder
setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.AddLspInputBuilder
setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.AddLspInputBuilder
setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.
-
-
-
Constructor Detail
-
AddLspInputBuilder
public AddLspInputBuilder()
Construct an empty builder.
-
AddLspInputBuilder
public AddLspInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.- Parameters:
arg
- NetworkTopologyReference from which the builder should be initialized
-
AddLspInputBuilder
public AddLspInputBuilder(AddLspArgs arg)
Construct a new builder initialized from specifiedAddLspArgs
.- Parameters:
arg
- AddLspArgs from which the builder should be initialized
-
AddLspInputBuilder
public AddLspInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.- Parameters:
arg
- LspId from which the builder should be initialized
-
AddLspInputBuilder
public AddLspInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.rev200120.NodeId from which the builder should be initialized
-
AddLspInputBuilder
public AddLspInputBuilder(AddLspInput base)
Construct a builder initialized with state from specifiedAddLspInput
.- Parameters:
base
- AddLspInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getArguments
public Arguments getArguments()
Return current value associated with the property corresponding toAddLspArgs.getArguments()
.- Returns:
- current value
-
getName
public String getName()
Return current value associated with the property corresponding toLspId.getName()
.- Returns:
- current value
-
getNetworkTopologyRef
public NetworkTopologyRef getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.- Returns:
- current value
-
getNode
public org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddLspInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setArguments
public AddLspInputBuilder setArguments(Arguments value)
Set the property corresponding toAddLspArgs.getArguments()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setName
public AddLspInputBuilder setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNetworkTopologyRef
public AddLspInputBuilder setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNode
public AddLspInputBuilder setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public AddLspInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddLspInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public AddLspInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddLspInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull AddLspInput build()
A newAddLspInput
instance.- Returns:
- A new
AddLspInput
instance.
-
-