Package org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.programming.rev181109
Class SubmitEnsureLspOperationalInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.programming.rev181109.SubmitEnsureLspOperationalInputBuilder
-
@Generated("mdsal-binding-generator") public class SubmitEnsureLspOperationalInputBuilder extends Object
Class that buildsSubmitEnsureLspOperationalInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
SubmitEnsureLspOperationalInput createSubmitEnsureLspOperationalInput(int fooXyzzy, int barBaz) { return new SubmitEnsureLspOperationalInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of SubmitEnsureLspOperationalInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
SubmitEnsureLspOperationalInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description SubmitEnsureLspOperationalInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<SubmitEnsureLspOperationalInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitEnsureLspOperationalInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull SubmitEnsureLspOperationalInput
build()
A newSubmitEnsureLspOperationalInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Arguments
getArguments()
Return current value associated with the property corresponding toEnsureLspOperationalArgs.getArguments()
.Nanotime
getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.InstructionId
getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.String
getName()
Return current value associated with the property corresponding toLspId.getName()
.NetworkTopologyRef
getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId
getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.Set<InstructionId>
getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.SubmitEnsureLspOperationalInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitEnsureLspOperationalInput>> augmentationType)
Remove an augmentation from this builder's product.SubmitEnsureLspOperationalInputBuilder
setArguments(Arguments value)
Set the property corresponding toEnsureLspOperationalArgs.getArguments()
to the specified value.SubmitEnsureLspOperationalInputBuilder
setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.SubmitEnsureLspOperationalInputBuilder
setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.SubmitEnsureLspOperationalInputBuilder
setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.SubmitEnsureLspOperationalInputBuilder
setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.SubmitEnsureLspOperationalInputBuilder
setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.SubmitEnsureLspOperationalInputBuilder
setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.
-
-
-
Constructor Detail
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder()
Construct an empty builder.
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(TopologyInstructionInput arg)
Construct a new builder initialized from specifiedTopologyInstructionInput
.- Parameters:
arg
- TopologyInstructionInput from which the builder should be initialized
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(SubmitInstructionInput arg)
Construct a new builder initialized from specifiedSubmitInstructionInput
.- Parameters:
arg
- SubmitInstructionInput from which the builder should be initialized
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.- Parameters:
arg
- NetworkTopologyReference from which the builder should be initialized
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(EnsureLspOperationalArgs arg)
Construct a new builder initialized from specifiedEnsureLspOperationalArgs
.- Parameters:
arg
- EnsureLspOperationalArgs from which the builder should be initialized
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.- Parameters:
arg
- LspId from which the builder should be initialized
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.rev200120.NodeId from which the builder should be initialized
-
SubmitEnsureLspOperationalInputBuilder
public SubmitEnsureLspOperationalInputBuilder(SubmitEnsureLspOperationalInput base)
Construct a builder initialized with state from specifiedSubmitEnsureLspOperationalInput
.- Parameters:
base
- SubmitEnsureLspOperationalInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getArguments
public Arguments getArguments()
Return current value associated with the property corresponding toEnsureLspOperationalArgs.getArguments()
.- Returns:
- current value
-
getDeadline
public Nanotime getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.- Returns:
- current value
-
getId
public InstructionId getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.- Returns:
- current value
-
getName
public String getName()
Return current value associated with the property corresponding toLspId.getName()
.- Returns:
- current value
-
getNetworkTopologyRef
public NetworkTopologyRef getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.- Returns:
- current value
-
getNode
public org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.- Returns:
- current value
-
getPreconditions
public Set<InstructionId> getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitEnsureLspOperationalInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setArguments
public SubmitEnsureLspOperationalInputBuilder setArguments(Arguments value)
Set the property corresponding toEnsureLspOperationalArgs.getArguments()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDeadline
public SubmitEnsureLspOperationalInputBuilder setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setId
public SubmitEnsureLspOperationalInputBuilder setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setName
public SubmitEnsureLspOperationalInputBuilder setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNetworkTopologyRef
public SubmitEnsureLspOperationalInputBuilder setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNode
public SubmitEnsureLspOperationalInputBuilder setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPreconditions
public SubmitEnsureLspOperationalInputBuilder setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
addAugmentation
public SubmitEnsureLspOperationalInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<SubmitEnsureLspOperationalInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public SubmitEnsureLspOperationalInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitEnsureLspOperationalInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull SubmitEnsureLspOperationalInput build()
A newSubmitEnsureLspOperationalInput
instance.- Returns:
- A new
SubmitEnsureLspOperationalInput
instance.
-
-