Package org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.programming.rev181109
Class SubmitAddLspInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.programming.rev181109.SubmitAddLspInputBuilder
-
@Generated("mdsal-binding-generator") public class SubmitAddLspInputBuilder extends Object
Class that buildsSubmitAddLspInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
SubmitAddLspInput createSubmitAddLspInput(int fooXyzzy, int barBaz) { return new SubmitAddLspInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of SubmitAddLspInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
SubmitAddLspInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description SubmitAddLspInputBuilder()
Construct an empty builder.SubmitAddLspInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.SubmitAddLspInputBuilder(SubmitInstructionInput arg)
Construct a new builder initialized from specifiedSubmitInstructionInput
.SubmitAddLspInputBuilder(SubmitAddLspInput base)
Construct a builder initialized with state from specifiedSubmitAddLspInput
.SubmitAddLspInputBuilder(AddLspArgs arg)
Construct a new builder initialized from specifiedAddLspArgs
.SubmitAddLspInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.SubmitAddLspInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.SubmitAddLspInputBuilder(TopologyInstructionInput arg)
Construct a new builder initialized from specifiedTopologyInstructionInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description SubmitAddLspInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<SubmitAddLspInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitAddLspInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull SubmitAddLspInput
build()
A newSubmitAddLspInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Arguments
getArguments()
Return current value associated with the property corresponding toAddLspArgs.getArguments()
.Nanotime
getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.InstructionId
getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.String
getName()
Return current value associated with the property corresponding toLspId.getName()
.NetworkTopologyRef
getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId
getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.Set<InstructionId>
getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.SubmitAddLspInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitAddLspInput>> augmentationType)
Remove an augmentation from this builder's product.SubmitAddLspInputBuilder
setArguments(Arguments value)
Set the property corresponding toAddLspArgs.getArguments()
to the specified value.SubmitAddLspInputBuilder
setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.SubmitAddLspInputBuilder
setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.SubmitAddLspInputBuilder
setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.SubmitAddLspInputBuilder
setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.SubmitAddLspInputBuilder
setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.SubmitAddLspInputBuilder
setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.
-
-
-
Constructor Detail
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder()
Construct an empty builder.
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(TopologyInstructionInput arg)
Construct a new builder initialized from specifiedTopologyInstructionInput
.- Parameters:
arg
- TopologyInstructionInput from which the builder should be initialized
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(SubmitInstructionInput arg)
Construct a new builder initialized from specifiedSubmitInstructionInput
.- Parameters:
arg
- SubmitInstructionInput from which the builder should be initialized
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(NetworkTopologyReference arg)
Construct a new builder initialized from specifiedNetworkTopologyReference
.- Parameters:
arg
- NetworkTopologyReference from which the builder should be initialized
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(AddLspArgs arg)
Construct a new builder initialized from specifiedAddLspArgs
.- Parameters:
arg
- AddLspArgs from which the builder should be initialized
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(LspId arg)
Construct a new builder initialized from specifiedLspId
.- Parameters:
arg
- LspId from which the builder should be initialized
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(NodeId arg)
Construct a new builder initialized from specifiedNodeId
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.pcep.rev200120.NodeId from which the builder should be initialized
-
SubmitAddLspInputBuilder
public SubmitAddLspInputBuilder(SubmitAddLspInput base)
Construct a builder initialized with state from specifiedSubmitAddLspInput
.- Parameters:
base
- SubmitAddLspInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getArguments
public Arguments getArguments()
Return current value associated with the property corresponding toAddLspArgs.getArguments()
.- Returns:
- current value
-
getDeadline
public Nanotime getDeadline()
Return current value associated with the property corresponding toSubmitInstructionInput.getDeadline()
.- Returns:
- current value
-
getId
public InstructionId getId()
Return current value associated with the property corresponding toSubmitInstructionInput.getId()
.- Returns:
- current value
-
getName
public String getName()
Return current value associated with the property corresponding toLspId.getName()
.- Returns:
- current value
-
getNetworkTopologyRef
public NetworkTopologyRef getNetworkTopologyRef()
Return current value associated with the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
.- Returns:
- current value
-
getNode
public org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId getNode()
Return current value associated with the property corresponding toNodeId.getNode()
.- Returns:
- current value
-
getPreconditions
public Set<InstructionId> getPreconditions()
Return current value associated with the property corresponding toSubmitInstructionInput.getPreconditions()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitAddLspInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setArguments
public SubmitAddLspInputBuilder setArguments(Arguments value)
Set the property corresponding toAddLspArgs.getArguments()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDeadline
public SubmitAddLspInputBuilder setDeadline(Nanotime value)
Set the property corresponding toSubmitInstructionInput.getDeadline()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setId
public SubmitAddLspInputBuilder setId(InstructionId value)
Set the property corresponding toSubmitInstructionInput.getId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setName
public SubmitAddLspInputBuilder setName(String value)
Set the property corresponding toLspId.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNetworkTopologyRef
public SubmitAddLspInputBuilder setNetworkTopologyRef(NetworkTopologyRef value)
Set the property corresponding toNetworkTopologyReference.getNetworkTopologyRef()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNode
public SubmitAddLspInputBuilder setNode(org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.network.topology.rev131021.NodeId value)
Set the property corresponding toNodeId.getNode()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPreconditions
public SubmitAddLspInputBuilder setPreconditions(Set<InstructionId> values)
Set the property corresponding toSubmitInstructionInput.getPreconditions()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
addAugmentation
public SubmitAddLspInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<SubmitAddLspInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public SubmitAddLspInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<SubmitAddLspInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull SubmitAddLspInput build()
A newSubmitAddLspInput
instance.- Returns:
- A new
SubmitAddLspInput
instance.
-
-