Package org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev181109.gc.object
Class GcBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev181109.gc.object.GcBuilder
-
@Generated("mdsal-binding-generator") public class GcBuilder extends Object
Class that buildsGc
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
Gc createGc(int fooXyzzy, int barBaz) { return new GcBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of Gc, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
Gc
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description GcBuilder()
Construct an empty builder.GcBuilder(Gc base)
Construct a builder initialized with state from specifiedGc
.GcBuilder(Object arg)
Construct a new builder initialized from specifiedObject
.GcBuilder(ObjectHeader arg)
Construct a new builder initialized from specifiedObjectHeader
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description GcBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Gc> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Gc>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull Gc
build()
A newGc
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getIgnore()
Return current value associated with the property corresponding toObjectHeader.getIgnore()
.org.opendaylight.yangtools.yang.common.Uint8
getMaxHop()
Return current value associated with the property corresponding toGc.getMaxHop()
.org.opendaylight.yangtools.yang.common.Uint8
getMaxUtilization()
Return current value associated with the property corresponding toGc.getMaxUtilization()
.org.opendaylight.yangtools.yang.common.Uint8
getMinUtilization()
Return current value associated with the property corresponding toGc.getMinUtilization()
.org.opendaylight.yangtools.yang.common.Uint8
getOverBookingFactor()
Return current value associated with the property corresponding toGc.getOverBookingFactor()
.Boolean
getProcessingRule()
Return current value associated with the property corresponding toObjectHeader.getProcessingRule()
.Tlvs
getTlvs()
Return current value associated with the property corresponding toGc.getTlvs()
.GcBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Gc>> augmentationType)
Remove an augmentation from this builder's product.GcBuilder
setIgnore(Boolean value)
Set the property corresponding toObjectHeader.getIgnore()
to the specified value.GcBuilder
setMaxHop(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getMaxHop()
to the specified value.GcBuilder
setMaxUtilization(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getMaxUtilization()
to the specified value.GcBuilder
setMinUtilization(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getMinUtilization()
to the specified value.GcBuilder
setOverBookingFactor(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getOverBookingFactor()
to the specified value.GcBuilder
setProcessingRule(Boolean value)
Set the property corresponding toObjectHeader.getProcessingRule()
to the specified value.GcBuilder
setTlvs(Tlvs value)
Set the property corresponding toGc.getTlvs()
to the specified value.
-
-
-
Constructor Detail
-
GcBuilder
public GcBuilder()
Construct an empty builder.
-
GcBuilder
public GcBuilder(Object arg)
Construct a new builder initialized from specifiedObject
.- Parameters:
arg
- Object from which the builder should be initialized
-
GcBuilder
public GcBuilder(ObjectHeader arg)
Construct a new builder initialized from specifiedObjectHeader
.- Parameters:
arg
- ObjectHeader from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getIgnore
public Boolean getIgnore()
Return current value associated with the property corresponding toObjectHeader.getIgnore()
.- Returns:
- current value
-
getMaxHop
public org.opendaylight.yangtools.yang.common.Uint8 getMaxHop()
Return current value associated with the property corresponding toGc.getMaxHop()
.- Returns:
- current value
-
getMaxUtilization
public org.opendaylight.yangtools.yang.common.Uint8 getMaxUtilization()
Return current value associated with the property corresponding toGc.getMaxUtilization()
.- Returns:
- current value
-
getMinUtilization
public org.opendaylight.yangtools.yang.common.Uint8 getMinUtilization()
Return current value associated with the property corresponding toGc.getMinUtilization()
.- Returns:
- current value
-
getOverBookingFactor
public org.opendaylight.yangtools.yang.common.Uint8 getOverBookingFactor()
Return current value associated with the property corresponding toGc.getOverBookingFactor()
.- Returns:
- current value
-
getProcessingRule
public Boolean getProcessingRule()
Return current value associated with the property corresponding toObjectHeader.getProcessingRule()
.- Returns:
- current value
-
getTlvs
public Tlvs getTlvs()
Return current value associated with the property corresponding toGc.getTlvs()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Gc>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setIgnore
public GcBuilder setIgnore(Boolean value)
Set the property corresponding toObjectHeader.getIgnore()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxHop
public GcBuilder setMaxHop(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getMaxHop()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxUtilization
public GcBuilder setMaxUtilization(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getMaxUtilization()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMinUtilization
public GcBuilder setMinUtilization(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getMinUtilization()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOverBookingFactor
public GcBuilder setOverBookingFactor(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGc.getOverBookingFactor()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setProcessingRule
public GcBuilder setProcessingRule(Boolean value)
Set the property corresponding toObjectHeader.getProcessingRule()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTlvs
public GcBuilder setTlvs(Tlvs value)
Set the property corresponding toGc.getTlvs()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public GcBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Gc> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public GcBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Gc>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
-