Class LspBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.ietf.stateful.rev200720.lsp.object.LspBuilder
-
@Generated("mdsal-binding-generator") public class LspBuilder extends Object
Class that buildsLsp
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
Lsp createLsp(int fooXyzzy, int barBaz) { return new LspBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of Lsp, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
Lsp
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description LspBuilder()
Construct an empty builder.LspBuilder(Lsp base)
Construct a builder initialized with state from specifiedLsp
.LspBuilder(Object arg)
Construct a new builder initialized from specifiedObject
.LspBuilder(ObjectHeader arg)
Construct a new builder initialized from specifiedObjectHeader
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description LspBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Lsp> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Lsp>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull Lsp
build()
A newLsp
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getAdministrative()
Return current value associated with the property corresponding toLsp.getAdministrative()
.Boolean
getDelegate()
Return current value associated with the property corresponding toLsp.getDelegate()
.Boolean
getIgnore()
Return current value associated with the property corresponding toObjectHeader.getIgnore()
.OperationalStatus
getOperational()
Return current value associated with the property corresponding toLsp.getOperational()
.PlspId
getPlspId()
Return current value associated with the property corresponding toLsp.getPlspId()
.Boolean
getProcessingRule()
Return current value associated with the property corresponding toObjectHeader.getProcessingRule()
.Boolean
getRemove()
Return current value associated with the property corresponding toLsp.getRemove()
.Boolean
getSync()
Return current value associated with the property corresponding toLsp.getSync()
.Tlvs
getTlvs()
Return current value associated with the property corresponding toLsp.getTlvs()
.LspBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Lsp>> augmentationType)
Remove an augmentation from this builder's product.LspBuilder
setAdministrative(Boolean value)
Set the property corresponding toLsp.getAdministrative()
to the specified value.LspBuilder
setDelegate(Boolean value)
Set the property corresponding toLsp.getDelegate()
to the specified value.LspBuilder
setIgnore(Boolean value)
Set the property corresponding toObjectHeader.getIgnore()
to the specified value.LspBuilder
setOperational(OperationalStatus value)
Set the property corresponding toLsp.getOperational()
to the specified value.LspBuilder
setPlspId(PlspId value)
Set the property corresponding toLsp.getPlspId()
to the specified value.LspBuilder
setProcessingRule(Boolean value)
Set the property corresponding toObjectHeader.getProcessingRule()
to the specified value.LspBuilder
setRemove(Boolean value)
Set the property corresponding toLsp.getRemove()
to the specified value.LspBuilder
setSync(Boolean value)
Set the property corresponding toLsp.getSync()
to the specified value.LspBuilder
setTlvs(Tlvs value)
Set the property corresponding toLsp.getTlvs()
to the specified value.
-
-
-
Constructor Detail
-
LspBuilder
public LspBuilder()
Construct an empty builder.
-
LspBuilder
public LspBuilder(Object arg)
Construct a new builder initialized from specifiedObject
.- Parameters:
arg
- Object from which the builder should be initialized
-
LspBuilder
public LspBuilder(ObjectHeader arg)
Construct a new builder initialized from specifiedObjectHeader
.- Parameters:
arg
- ObjectHeader from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAdministrative
public Boolean getAdministrative()
Return current value associated with the property corresponding toLsp.getAdministrative()
.- Returns:
- current value
-
getDelegate
public Boolean getDelegate()
Return current value associated with the property corresponding toLsp.getDelegate()
.- Returns:
- current value
-
getIgnore
public Boolean getIgnore()
Return current value associated with the property corresponding toObjectHeader.getIgnore()
.- Returns:
- current value
-
getOperational
public OperationalStatus getOperational()
Return current value associated with the property corresponding toLsp.getOperational()
.- Returns:
- current value
-
getPlspId
public PlspId getPlspId()
Return current value associated with the property corresponding toLsp.getPlspId()
.- Returns:
- current value
-
getProcessingRule
public Boolean getProcessingRule()
Return current value associated with the property corresponding toObjectHeader.getProcessingRule()
.- Returns:
- current value
-
getRemove
public Boolean getRemove()
Return current value associated with the property corresponding toLsp.getRemove()
.- Returns:
- current value
-
getSync
public Boolean getSync()
Return current value associated with the property corresponding toLsp.getSync()
.- Returns:
- current value
-
getTlvs
public Tlvs getTlvs()
Return current value associated with the property corresponding toLsp.getTlvs()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Lsp>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAdministrative
public LspBuilder setAdministrative(Boolean value)
Set the property corresponding toLsp.getAdministrative()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDelegate
public LspBuilder setDelegate(Boolean value)
Set the property corresponding toLsp.getDelegate()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIgnore
public LspBuilder setIgnore(Boolean value)
Set the property corresponding toObjectHeader.getIgnore()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOperational
public LspBuilder setOperational(OperationalStatus value)
Set the property corresponding toLsp.getOperational()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPlspId
public LspBuilder setPlspId(PlspId value)
Set the property corresponding toLsp.getPlspId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setProcessingRule
public LspBuilder setProcessingRule(Boolean value)
Set the property corresponding toObjectHeader.getProcessingRule()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRemove
public LspBuilder setRemove(Boolean value)
Set the property corresponding toLsp.getRemove()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSync
public LspBuilder setSync(Boolean value)
Set the property corresponding toLsp.getSync()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTlvs
public LspBuilder setTlvs(Tlvs value)
Set the property corresponding toLsp.getTlvs()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public LspBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Lsp> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public LspBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Lsp>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
-