Class RequestsBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.ietf.initiated.rev200720.pcinitiate.message.pcinitiate.message.RequestsBuilder
-
@Generated("mdsal-binding-generator") public class RequestsBuilder extends Object
Class that buildsRequests
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
Requests createRequests(int fooXyzzy, int barBaz) { return new RequestsBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of Requests, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
Requests
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description RequestsBuilder()
Construct an empty builder.RequestsBuilder(Requests base)
Construct a builder initialized with state from specifiedRequests
.RequestsBuilder(LspObject arg)
Construct a new builder initialized from specifiedLspObject
.RequestsBuilder(SrpObject arg)
Construct a new builder initialized from specifiedSrpObject
.RequestsBuilder(BandwidthObject arg)
Construct a new builder initialized from specifiedBandwidthObject
.RequestsBuilder(ClasstypeObject arg)
Construct a new builder initialized from specifiedClasstypeObject
.RequestsBuilder(EndpointsObject arg)
Construct a new builder initialized from specifiedEndpointsObject
.RequestsBuilder(ExcludeRouteObject arg)
Construct a new builder initialized from specifiedExcludeRouteObject
.RequestsBuilder(ExplicitRouteObject arg)
Construct a new builder initialized from specifiedExplicitRouteObject
.RequestsBuilder(IncludeRouteObject arg)
Construct a new builder initialized from specifiedIncludeRouteObject
.RequestsBuilder(LspaObject arg)
Construct a new builder initialized from specifiedLspaObject
.RequestsBuilder(LspAttributes arg)
Construct a new builder initialized from specifiedLspAttributes
.RequestsBuilder(OfObject arg)
Construct a new builder initialized from specifiedOfObject
.RequestsBuilder(ReoptimizationBandwidthObject arg)
Construct a new builder initialized from specifiedReoptimizationBandwidthObject
.RequestsBuilder(ReportedRouteObject arg)
Construct a new builder initialized from specifiedReportedRouteObject
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description RequestsBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Requests> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Requests>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull Requests
build()
A newRequests
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Bandwidth
getBandwidth()
Return current value associated with the property corresponding toBandwidthObject.getBandwidth()
.ClassType
getClassType()
Return current value associated with the property corresponding toClasstypeObject.getClassType()
.EndpointsObj
getEndpointsObj()
Return current value associated with the property corresponding toEndpointsObject.getEndpointsObj()
.Ero
getEro()
Return current value associated with the property corresponding toExplicitRouteObject.getEro()
.Iro
getIro()
Return current value associated with the property corresponding toIncludeRouteObject.getIro()
.Lsp
getLsp()
Return current value associated with the property corresponding toLspObject.getLsp()
.Lspa
getLspa()
Return current value associated with the property corresponding toLspaObject.getLspa()
.List<Metrics>
getMetrics()
Return current value associated with the property corresponding toLspAttributes.getMetrics()
.Of
getOf()
Return current value associated with the property corresponding toOfObject.getOf()
.ReoptimizationBandwidth
getReoptimizationBandwidth()
Return current value associated with the property corresponding toReoptimizationBandwidthObject.getReoptimizationBandwidth()
.Rro
getRro()
Return current value associated with the property corresponding toReportedRouteObject.getRro()
.Srp
getSrp()
Return current value associated with the property corresponding toSrpObject.getSrp()
.Xro
getXro()
Return current value associated with the property corresponding toExcludeRouteObject.getXro()
.RequestsBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Requests>> augmentationType)
Remove an augmentation from this builder's product.RequestsBuilder
setBandwidth(Bandwidth value)
Set the property corresponding toBandwidthObject.getBandwidth()
to the specified value.RequestsBuilder
setClassType(ClassType value)
Set the property corresponding toClasstypeObject.getClassType()
to the specified value.RequestsBuilder
setEndpointsObj(EndpointsObj value)
Set the property corresponding toEndpointsObject.getEndpointsObj()
to the specified value.RequestsBuilder
setEro(Ero value)
Set the property corresponding toExplicitRouteObject.getEro()
to the specified value.RequestsBuilder
setIro(Iro value)
Set the property corresponding toIncludeRouteObject.getIro()
to the specified value.RequestsBuilder
setLsp(Lsp value)
Set the property corresponding toLspObject.getLsp()
to the specified value.RequestsBuilder
setLspa(Lspa value)
Set the property corresponding toLspaObject.getLspa()
to the specified value.RequestsBuilder
setMetrics(List<Metrics> values)
Set the property corresponding toLspAttributes.getMetrics()
to the specified value.RequestsBuilder
setOf(Of value)
Set the property corresponding toOfObject.getOf()
to the specified value.RequestsBuilder
setReoptimizationBandwidth(ReoptimizationBandwidth value)
Set the property corresponding toReoptimizationBandwidthObject.getReoptimizationBandwidth()
to the specified value.RequestsBuilder
setRro(Rro value)
Set the property corresponding toReportedRouteObject.getRro()
to the specified value.RequestsBuilder
setSrp(Srp value)
Set the property corresponding toSrpObject.getSrp()
to the specified value.RequestsBuilder
setXro(Xro value)
Set the property corresponding toExcludeRouteObject.getXro()
to the specified value.
-
-
-
Constructor Detail
-
RequestsBuilder
public RequestsBuilder()
Construct an empty builder.
-
RequestsBuilder
public RequestsBuilder(SrpObject arg)
Construct a new builder initialized from specifiedSrpObject
.- Parameters:
arg
- SrpObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(LspObject arg)
Construct a new builder initialized from specifiedLspObject
.- Parameters:
arg
- LspObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(EndpointsObject arg)
Construct a new builder initialized from specifiedEndpointsObject
.- Parameters:
arg
- EndpointsObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(ExplicitRouteObject arg)
Construct a new builder initialized from specifiedExplicitRouteObject
.- Parameters:
arg
- ExplicitRouteObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(LspAttributes arg)
Construct a new builder initialized from specifiedLspAttributes
.- Parameters:
arg
- LspAttributes from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(LspaObject arg)
Construct a new builder initialized from specifiedLspaObject
.- Parameters:
arg
- LspaObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(BandwidthObject arg)
Construct a new builder initialized from specifiedBandwidthObject
.- Parameters:
arg
- BandwidthObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(ReoptimizationBandwidthObject arg)
Construct a new builder initialized from specifiedReoptimizationBandwidthObject
.- Parameters:
arg
- ReoptimizationBandwidthObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(IncludeRouteObject arg)
Construct a new builder initialized from specifiedIncludeRouteObject
.- Parameters:
arg
- IncludeRouteObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(ReportedRouteObject arg)
Construct a new builder initialized from specifiedReportedRouteObject
.- Parameters:
arg
- ReportedRouteObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(ExcludeRouteObject arg)
Construct a new builder initialized from specifiedExcludeRouteObject
.- Parameters:
arg
- ExcludeRouteObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(OfObject arg)
Construct a new builder initialized from specifiedOfObject
.- Parameters:
arg
- OfObject from which the builder should be initialized
-
RequestsBuilder
public RequestsBuilder(ClasstypeObject arg)
Construct a new builder initialized from specifiedClasstypeObject
.- Parameters:
arg
- ClasstypeObject from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBandwidth
public Bandwidth getBandwidth()
Return current value associated with the property corresponding toBandwidthObject.getBandwidth()
.- Returns:
- current value
-
getClassType
public ClassType getClassType()
Return current value associated with the property corresponding toClasstypeObject.getClassType()
.- Returns:
- current value
-
getEndpointsObj
public EndpointsObj getEndpointsObj()
Return current value associated with the property corresponding toEndpointsObject.getEndpointsObj()
.- Returns:
- current value
-
getEro
public Ero getEro()
Return current value associated with the property corresponding toExplicitRouteObject.getEro()
.- Returns:
- current value
-
getIro
public Iro getIro()
Return current value associated with the property corresponding toIncludeRouteObject.getIro()
.- Returns:
- current value
-
getLsp
public Lsp getLsp()
Return current value associated with the property corresponding toLspObject.getLsp()
.- Returns:
- current value
-
getLspa
public Lspa getLspa()
Return current value associated with the property corresponding toLspaObject.getLspa()
.- Returns:
- current value
-
getMetrics
public List<Metrics> getMetrics()
Return current value associated with the property corresponding toLspAttributes.getMetrics()
.- Returns:
- current value
-
getOf
public Of getOf()
Return current value associated with the property corresponding toOfObject.getOf()
.- Returns:
- current value
-
getReoptimizationBandwidth
public ReoptimizationBandwidth getReoptimizationBandwidth()
Return current value associated with the property corresponding toReoptimizationBandwidthObject.getReoptimizationBandwidth()
.- Returns:
- current value
-
getRro
public Rro getRro()
Return current value associated with the property corresponding toReportedRouteObject.getRro()
.- Returns:
- current value
-
getSrp
public Srp getSrp()
Return current value associated with the property corresponding toSrpObject.getSrp()
.- Returns:
- current value
-
getXro
public Xro getXro()
Return current value associated with the property corresponding toExcludeRouteObject.getXro()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Requests>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBandwidth
public RequestsBuilder setBandwidth(Bandwidth value)
Set the property corresponding toBandwidthObject.getBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setClassType
public RequestsBuilder setClassType(ClassType value)
Set the property corresponding toClasstypeObject.getClassType()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setEndpointsObj
public RequestsBuilder setEndpointsObj(EndpointsObj value)
Set the property corresponding toEndpointsObject.getEndpointsObj()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setEro
public RequestsBuilder setEro(Ero value)
Set the property corresponding toExplicitRouteObject.getEro()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIro
public RequestsBuilder setIro(Iro value)
Set the property corresponding toIncludeRouteObject.getIro()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLsp
public RequestsBuilder setLsp(Lsp value)
Set the property corresponding toLspObject.getLsp()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLspa
public RequestsBuilder setLspa(Lspa value)
Set the property corresponding toLspaObject.getLspa()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMetrics
public RequestsBuilder setMetrics(List<Metrics> values)
Set the property corresponding toLspAttributes.getMetrics()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setOf
public RequestsBuilder setOf(Of value)
Set the property corresponding toOfObject.getOf()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setReoptimizationBandwidth
public RequestsBuilder setReoptimizationBandwidth(ReoptimizationBandwidth value)
Set the property corresponding toReoptimizationBandwidthObject.getReoptimizationBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRro
public RequestsBuilder setRro(Rro value)
Set the property corresponding toReportedRouteObject.getRro()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSrp
public RequestsBuilder setSrp(Srp value)
Set the property corresponding toSrpObject.getSrp()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setXro
public RequestsBuilder setXro(Xro value)
Set the property corresponding toExcludeRouteObject.getXro()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public RequestsBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Requests> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public RequestsBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Requests>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
-