Class AddPrefixInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.odl.bgp.app.peer.benchmark.rev200120.AddPrefixInputBuilder
-
@Generated("mdsal-binding-generator") public class AddPrefixInputBuilder extends Object
Class that buildsAddPrefixInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
AddPrefixInput createAddPrefixInput(int fooXyzzy, int barBaz) { return new AddPrefixInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of AddPrefixInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
AddPrefixInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description AddPrefixInputBuilder()
Construct an empty builder.AddPrefixInputBuilder(AddPrefixInput base)
Construct a builder initialized with state from specifiedAddPrefixInput
.AddPrefixInputBuilder(Input arg)
Construct a new builder initialized from specifiedInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description AddPrefixInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddPrefixInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddPrefixInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull AddPrefixInput
build()
A newAddPrefixInput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.org.opendaylight.yangtools.yang.common.Uint32
getBatchsize()
Return current value associated with the property corresponding toInput.getBatchsize()
.org.opendaylight.yangtools.yang.common.Uint32
getCount()
Return current value associated with the property corresponding toInput.getCount()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone
getNexthop()
Return current value associated with the property corresponding toAddPrefixInput.getNexthop()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix
getPrefix()
Return current value associated with the property corresponding toInput.getPrefix()
.AddPrefixInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddPrefixInput>> augmentationType)
Remove an augmentation from this builder's product.AddPrefixInputBuilder
setBatchsize(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toInput.getBatchsize()
to the specified value.AddPrefixInputBuilder
setCount(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toInput.getCount()
to the specified value.AddPrefixInputBuilder
setNexthop(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone value)
Set the property corresponding toAddPrefixInput.getNexthop()
to the specified value.AddPrefixInputBuilder
setPrefix(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix value)
Set the property corresponding toInput.getPrefix()
to the specified value.
-
-
-
Constructor Detail
-
AddPrefixInputBuilder
public AddPrefixInputBuilder()
Construct an empty builder.
-
AddPrefixInputBuilder
public AddPrefixInputBuilder(Input arg)
Construct a new builder initialized from specifiedInput
.- Parameters:
arg
- Input from which the builder should be initialized
-
AddPrefixInputBuilder
public AddPrefixInputBuilder(AddPrefixInput base)
Construct a builder initialized with state from specifiedAddPrefixInput
.- Parameters:
base
- AddPrefixInput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBatchsize
public org.opendaylight.yangtools.yang.common.Uint32 getBatchsize()
Return current value associated with the property corresponding toInput.getBatchsize()
.- Returns:
- current value
-
getCount
public org.opendaylight.yangtools.yang.common.Uint32 getCount()
Return current value associated with the property corresponding toInput.getCount()
.- Returns:
- current value
-
getNexthop
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone getNexthop()
Return current value associated with the property corresponding toAddPrefixInput.getNexthop()
.- Returns:
- current value
-
getPrefix
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix getPrefix()
Return current value associated with the property corresponding toInput.getPrefix()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddPrefixInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBatchsize
public AddPrefixInputBuilder setBatchsize(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toInput.getBatchsize()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCount
public AddPrefixInputBuilder setCount(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toInput.getCount()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNexthop
public AddPrefixInputBuilder setNexthop(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone value)
Set the property corresponding toAddPrefixInput.getNexthop()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPrefix
public AddPrefixInputBuilder setPrefix(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Prefix value)
Set the property corresponding toInput.getPrefix()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public AddPrefixInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddPrefixInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public AddPrefixInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddPrefixInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull AddPrefixInput build()
A newAddPrefixInput
instance.- Returns:
- A new
AddPrefixInput
instance.
-
-