Class EdgeAttributesBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.graph.rev191125.edge.EdgeAttributesBuilder
-
@Generated("mdsal-binding-generator") public class EdgeAttributesBuilder extends Object
Class that buildsEdgeAttributes
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
EdgeAttributes createEdgeAttributes(int fooXyzzy, int barBaz) { return new EdgeAttributesBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of EdgeAttributes, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
EdgeAttributes
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description EdgeAttributesBuilder()
Construct an empty builder.EdgeAttributesBuilder(EdgeAttributes base)
Construct a builder initialized with state from specifiedEdgeAttributes
.EdgeAttributesBuilder(EdgeAttributes arg)
Construct a new builder initialized from specifiedEdgeAttributes
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description EdgeAttributesBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<EdgeAttributes> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<EdgeAttributes>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull EdgeAttributes
build()
A newEdgeAttributes
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.org.opendaylight.yangtools.yang.common.Uint32
getAdjSid()
Return current value associated with the property corresponding toEdgeAttributes.getAdjSid()
.org.opendaylight.yangtools.yang.common.Uint32
getAdminGroup()
Return current value associated with the property corresponding toEdgeAttributes.getAdminGroup()
.DecimalBandwidth
getAvailableBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getAvailableBandwidth()
.org.opendaylight.yangtools.yang.common.Uint32
getBackupAdjSid()
Return current value associated with the property corresponding toEdgeAttributes.getBackupAdjSid()
.Delay
getDelay()
Return current value associated with the property corresponding toEdgeAttributes.getDelay()
.Delay
getJitter()
Return current value associated with the property corresponding toEdgeAttributes.getJitter()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress
getLocalAddress()
Return current value associated with the property corresponding toEdgeAttributes.getLocalAddress()
.org.opendaylight.yangtools.yang.common.Uint32
getLocalIdentifier()
Return current value associated with the property corresponding toEdgeAttributes.getLocalIdentifier()
.Loss
getLoss()
Return current value associated with the property corresponding toEdgeAttributes.getLoss()
.DecimalBandwidth
getMaxLinkBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getMaxLinkBandwidth()
.DecimalBandwidth
getMaxResvLinkBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getMaxResvLinkBandwidth()
.org.opendaylight.yangtools.yang.common.Uint32
getMetric()
Return current value associated with the property corresponding toEdgeAttributes.getMetric()
.MinMaxDelay
getMinMaxDelay()
Return current value associated with the property corresponding toEdgeAttributes.getMinMaxDelay()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress
getRemoteAddress()
Return current value associated with the property corresponding toEdgeAttributes.getRemoteAddress()
.org.opendaylight.yangtools.yang.common.Uint32
getRemoteIdentifier()
Return current value associated with the property corresponding toEdgeAttributes.getRemoteIdentifier()
.DecimalBandwidth
getResidualBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getResidualBandwidth()
.Set<org.opendaylight.yangtools.yang.common.Uint32>
getSrlgs()
Return current value associated with the property corresponding toEdgeAttributes.getSrlgs()
.org.opendaylight.yangtools.yang.common.Uint32
getTeMetric()
Return current value associated with the property corresponding toEdgeAttributes.getTeMetric()
.List<UnreservedBandwidth>
getUnreservedBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getUnreservedBandwidth()
.DecimalBandwidth
getUtilizedBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getUtilizedBandwidth()
.EdgeAttributesBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<EdgeAttributes>> augmentationType)
Remove an augmentation from this builder's product.EdgeAttributesBuilder
setAdjSid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getAdjSid()
to the specified value.EdgeAttributesBuilder
setAdminGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getAdminGroup()
to the specified value.EdgeAttributesBuilder
setAvailableBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getAvailableBandwidth()
to the specified value.EdgeAttributesBuilder
setBackupAdjSid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getBackupAdjSid()
to the specified value.EdgeAttributesBuilder
setDelay(Delay value)
Set the property corresponding toEdgeAttributes.getDelay()
to the specified value.EdgeAttributesBuilder
setJitter(Delay value)
Set the property corresponding toEdgeAttributes.getJitter()
to the specified value.EdgeAttributesBuilder
setLocalAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toEdgeAttributes.getLocalAddress()
to the specified value.EdgeAttributesBuilder
setLocalIdentifier(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getLocalIdentifier()
to the specified value.EdgeAttributesBuilder
setLoss(Loss value)
Set the property corresponding toEdgeAttributes.getLoss()
to the specified value.EdgeAttributesBuilder
setMaxLinkBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getMaxLinkBandwidth()
to the specified value.EdgeAttributesBuilder
setMaxResvLinkBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getMaxResvLinkBandwidth()
to the specified value.EdgeAttributesBuilder
setMetric(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getMetric()
to the specified value.EdgeAttributesBuilder
setMinMaxDelay(MinMaxDelay value)
Set the property corresponding toEdgeAttributes.getMinMaxDelay()
to the specified value.EdgeAttributesBuilder
setRemoteAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toEdgeAttributes.getRemoteAddress()
to the specified value.EdgeAttributesBuilder
setRemoteIdentifier(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getRemoteIdentifier()
to the specified value.EdgeAttributesBuilder
setResidualBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getResidualBandwidth()
to the specified value.EdgeAttributesBuilder
setSrlgs(Set<org.opendaylight.yangtools.yang.common.Uint32> values)
Set the property corresponding toEdgeAttributes.getSrlgs()
to the specified value.EdgeAttributesBuilder
setTeMetric(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getTeMetric()
to the specified value.EdgeAttributesBuilder
setUnreservedBandwidth(List<UnreservedBandwidth> values)
Set the property corresponding toEdgeAttributes.getUnreservedBandwidth()
to the specified value.EdgeAttributesBuilder
setUtilizedBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getUtilizedBandwidth()
to the specified value.
-
-
-
Constructor Detail
-
EdgeAttributesBuilder
public EdgeAttributesBuilder()
Construct an empty builder.
-
EdgeAttributesBuilder
public EdgeAttributesBuilder(EdgeAttributes arg)
Construct a new builder initialized from specifiedEdgeAttributes
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.graph.rev191125.EdgeAttributes from which the builder should be initialized
-
EdgeAttributesBuilder
public EdgeAttributesBuilder(EdgeAttributes base)
Construct a builder initialized with state from specifiedEdgeAttributes
.- Parameters:
base
- EdgeAttributes from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAdjSid
public org.opendaylight.yangtools.yang.common.Uint32 getAdjSid()
Return current value associated with the property corresponding toEdgeAttributes.getAdjSid()
.- Returns:
- current value
-
getAdminGroup
public org.opendaylight.yangtools.yang.common.Uint32 getAdminGroup()
Return current value associated with the property corresponding toEdgeAttributes.getAdminGroup()
.- Returns:
- current value
-
getAvailableBandwidth
public DecimalBandwidth getAvailableBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getAvailableBandwidth()
.- Returns:
- current value
-
getBackupAdjSid
public org.opendaylight.yangtools.yang.common.Uint32 getBackupAdjSid()
Return current value associated with the property corresponding toEdgeAttributes.getBackupAdjSid()
.- Returns:
- current value
-
getDelay
public Delay getDelay()
Return current value associated with the property corresponding toEdgeAttributes.getDelay()
.- Returns:
- current value
-
getJitter
public Delay getJitter()
Return current value associated with the property corresponding toEdgeAttributes.getJitter()
.- Returns:
- current value
-
getLocalAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress getLocalAddress()
Return current value associated with the property corresponding toEdgeAttributes.getLocalAddress()
.- Returns:
- current value
-
getLocalIdentifier
public org.opendaylight.yangtools.yang.common.Uint32 getLocalIdentifier()
Return current value associated with the property corresponding toEdgeAttributes.getLocalIdentifier()
.- Returns:
- current value
-
getLoss
public Loss getLoss()
Return current value associated with the property corresponding toEdgeAttributes.getLoss()
.- Returns:
- current value
-
getMaxLinkBandwidth
public DecimalBandwidth getMaxLinkBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getMaxLinkBandwidth()
.- Returns:
- current value
-
getMaxResvLinkBandwidth
public DecimalBandwidth getMaxResvLinkBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getMaxResvLinkBandwidth()
.- Returns:
- current value
-
getMetric
public org.opendaylight.yangtools.yang.common.Uint32 getMetric()
Return current value associated with the property corresponding toEdgeAttributes.getMetric()
.- Returns:
- current value
-
getMinMaxDelay
public MinMaxDelay getMinMaxDelay()
Return current value associated with the property corresponding toEdgeAttributes.getMinMaxDelay()
.- Returns:
- current value
-
getRemoteAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress getRemoteAddress()
Return current value associated with the property corresponding toEdgeAttributes.getRemoteAddress()
.- Returns:
- current value
-
getRemoteIdentifier
public org.opendaylight.yangtools.yang.common.Uint32 getRemoteIdentifier()
Return current value associated with the property corresponding toEdgeAttributes.getRemoteIdentifier()
.- Returns:
- current value
-
getResidualBandwidth
public DecimalBandwidth getResidualBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getResidualBandwidth()
.- Returns:
- current value
-
getSrlgs
public Set<org.opendaylight.yangtools.yang.common.Uint32> getSrlgs()
Return current value associated with the property corresponding toEdgeAttributes.getSrlgs()
.- Returns:
- current value
-
getTeMetric
public org.opendaylight.yangtools.yang.common.Uint32 getTeMetric()
Return current value associated with the property corresponding toEdgeAttributes.getTeMetric()
.- Returns:
- current value
-
getUnreservedBandwidth
public List<UnreservedBandwidth> getUnreservedBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getUnreservedBandwidth()
.- Returns:
- current value
-
getUtilizedBandwidth
public DecimalBandwidth getUtilizedBandwidth()
Return current value associated with the property corresponding toEdgeAttributes.getUtilizedBandwidth()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<EdgeAttributes>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAdjSid
public EdgeAttributesBuilder setAdjSid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getAdjSid()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setAdminGroup
public EdgeAttributesBuilder setAdminGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getAdminGroup()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setAvailableBandwidth
public EdgeAttributesBuilder setAvailableBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getAvailableBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBackupAdjSid
public EdgeAttributesBuilder setBackupAdjSid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getBackupAdjSid()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDelay
public EdgeAttributesBuilder setDelay(Delay value)
Set the property corresponding toEdgeAttributes.getDelay()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setJitter
public EdgeAttributesBuilder setJitter(Delay value)
Set the property corresponding toEdgeAttributes.getJitter()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLocalAddress
public EdgeAttributesBuilder setLocalAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toEdgeAttributes.getLocalAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLocalIdentifier
public EdgeAttributesBuilder setLocalIdentifier(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getLocalIdentifier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLoss
public EdgeAttributesBuilder setLoss(Loss value)
Set the property corresponding toEdgeAttributes.getLoss()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxLinkBandwidth
public EdgeAttributesBuilder setMaxLinkBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getMaxLinkBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxResvLinkBandwidth
public EdgeAttributesBuilder setMaxResvLinkBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getMaxResvLinkBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMetric
public EdgeAttributesBuilder setMetric(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getMetric()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMinMaxDelay
public EdgeAttributesBuilder setMinMaxDelay(MinMaxDelay value)
Set the property corresponding toEdgeAttributes.getMinMaxDelay()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRemoteAddress
public EdgeAttributesBuilder setRemoteAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toEdgeAttributes.getRemoteAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRemoteIdentifier
public EdgeAttributesBuilder setRemoteIdentifier(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getRemoteIdentifier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setResidualBandwidth
public EdgeAttributesBuilder setResidualBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getResidualBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSrlgs
public EdgeAttributesBuilder setSrlgs(Set<org.opendaylight.yangtools.yang.common.Uint32> values)
Set the property corresponding toEdgeAttributes.getSrlgs()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setTeMetric
public EdgeAttributesBuilder setTeMetric(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toEdgeAttributes.getTeMetric()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setUnreservedBandwidth
public EdgeAttributesBuilder setUnreservedBandwidth(List<UnreservedBandwidth> values)
Set the property corresponding toEdgeAttributes.getUnreservedBandwidth()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setUtilizedBandwidth
public EdgeAttributesBuilder setUtilizedBandwidth(DecimalBandwidth value)
Set the property corresponding toEdgeAttributes.getUtilizedBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public EdgeAttributesBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<EdgeAttributes> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public EdgeAttributesBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<EdgeAttributes>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull EdgeAttributes build()
A newEdgeAttributes
instance.- Returns:
- A new
EdgeAttributes
instance.
-
-