Package org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bmp.message.rev200120.peer.up
Class ReceivedOpenBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bmp.message.rev200120.peer.up.ReceivedOpenBuilder
-
@Generated("mdsal-binding-generator") public class ReceivedOpenBuilder extends Object
Class that buildsReceivedOpen
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
ReceivedOpen createReceivedOpen(int fooXyzzy, int barBaz) { return new ReceivedOpenBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of ReceivedOpen, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
ReceivedOpen
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description ReceivedOpenBuilder()
Construct an empty builder.ReceivedOpenBuilder(OpenMessage arg)
Construct a new builder initialized from specifiedOpenMessage
.ReceivedOpenBuilder(OpenMsg arg)
Construct a new builder initialized from specifiedOpenMsg
.ReceivedOpenBuilder(ReceivedOpen base)
Construct a builder initialized with state from specifiedReceivedOpen
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description ReceivedOpenBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<ReceivedOpen> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<ReceivedOpen>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull ReceivedOpen
build()
A newReceivedOpen
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone
getBgpIdentifier()
Return current value associated with the property corresponding toOpenMessage.getBgpIdentifier()
.List<BgpParameters>
getBgpParameters()
Return current value associated with the property corresponding toOpenMessage.getBgpParameters()
.org.opendaylight.yangtools.yang.common.Uint16
getHoldTimer()
Return current value associated with the property corresponding toOpenMessage.getHoldTimer()
.org.opendaylight.yangtools.yang.common.Uint16
getMyAsNumber()
Return current value associated with the property corresponding toOpenMessage.getMyAsNumber()
.ProtocolVersion
getVersion()
Return current value associated with the property corresponding toOpenMessage.getVersion()
.ReceivedOpenBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<ReceivedOpen>> augmentationType)
Remove an augmentation from this builder's product.ReceivedOpenBuilder
setBgpIdentifier(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone value)
Set the property corresponding toOpenMessage.getBgpIdentifier()
to the specified value.ReceivedOpenBuilder
setBgpParameters(List<BgpParameters> values)
Set the property corresponding toOpenMessage.getBgpParameters()
to the specified value.ReceivedOpenBuilder
setHoldTimer(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toOpenMessage.getHoldTimer()
to the specified value.ReceivedOpenBuilder
setMyAsNumber(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toOpenMessage.getMyAsNumber()
to the specified value.ReceivedOpenBuilder
setVersion(ProtocolVersion value)
Set the property corresponding toOpenMessage.getVersion()
to the specified value.
-
-
-
Constructor Detail
-
ReceivedOpenBuilder
public ReceivedOpenBuilder()
Construct an empty builder.
-
ReceivedOpenBuilder
public ReceivedOpenBuilder(OpenMsg arg)
Construct a new builder initialized from specifiedOpenMsg
.- Parameters:
arg
- OpenMsg from which the builder should be initialized
-
ReceivedOpenBuilder
public ReceivedOpenBuilder(OpenMessage arg)
Construct a new builder initialized from specifiedOpenMessage
.- Parameters:
arg
- OpenMessage from which the builder should be initialized
-
ReceivedOpenBuilder
public ReceivedOpenBuilder(ReceivedOpen base)
Construct a builder initialized with state from specifiedReceivedOpen
.- Parameters:
base
- ReceivedOpen from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBgpIdentifier
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone getBgpIdentifier()
Return current value associated with the property corresponding toOpenMessage.getBgpIdentifier()
.- Returns:
- current value
-
getBgpParameters
public List<BgpParameters> getBgpParameters()
Return current value associated with the property corresponding toOpenMessage.getBgpParameters()
.- Returns:
- current value
-
getHoldTimer
public org.opendaylight.yangtools.yang.common.Uint16 getHoldTimer()
Return current value associated with the property corresponding toOpenMessage.getHoldTimer()
.- Returns:
- current value
-
getMyAsNumber
public org.opendaylight.yangtools.yang.common.Uint16 getMyAsNumber()
Return current value associated with the property corresponding toOpenMessage.getMyAsNumber()
.- Returns:
- current value
-
getVersion
public ProtocolVersion getVersion()
Return current value associated with the property corresponding toOpenMessage.getVersion()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<ReceivedOpen>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBgpIdentifier
public ReceivedOpenBuilder setBgpIdentifier(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone value)
Set the property corresponding toOpenMessage.getBgpIdentifier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBgpParameters
public ReceivedOpenBuilder setBgpParameters(List<BgpParameters> values)
Set the property corresponding toOpenMessage.getBgpParameters()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setHoldTimer
public ReceivedOpenBuilder setHoldTimer(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toOpenMessage.getHoldTimer()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMyAsNumber
public ReceivedOpenBuilder setMyAsNumber(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toOpenMessage.getMyAsNumber()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setVersion
public ReceivedOpenBuilder setVersion(ProtocolVersion value)
Set the property corresponding toOpenMessage.getVersion()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public ReceivedOpenBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<ReceivedOpen> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public ReceivedOpenBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<ReceivedOpen>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull ReceivedOpen build()
A newReceivedOpen
instance.- Returns:
- A new
ReceivedOpen
instance.
-
-