Class Ipv6EroBackupBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.segment.routing.ext.rev200120.binding.sub.tlvs.binding.sub.tlv.ipv6.ero.backup._case.Ipv6EroBackupBuilder
-
@Generated("mdsal-binding-generator") public class Ipv6EroBackupBuilder extends Object
Class that buildsIpv6EroBackup
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
Ipv6EroBackup createIpv6EroBackup(int fooXyzzy, int barBaz) { return new Ipv6EroBackupBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of Ipv6EroBackup, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
Ipv6EroBackup
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description Ipv6EroBackupBuilder()
Construct an empty builder.Ipv6EroBackupBuilder(Ipv6EroBackup base)
Construct a builder initialized with state from specifiedIpv6EroBackup
.Ipv6EroBackupBuilder(EroFlags arg)
Construct a new builder initialized from specifiedEroFlags
.Ipv6EroBackupBuilder(EroIpv6Address arg)
Construct a new builder initialized from specifiedEroIpv6Address
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description Ipv6EroBackupBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6EroBackup> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6EroBackup>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull Ipv6EroBackup
build()
A newIpv6EroBackup
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6AddressNoZone
getAddress()
Return current value associated with the property corresponding toEroIpv6Address.getAddress()
.Boolean
getLoose()
Return current value associated with the property corresponding toEroFlags.getLoose()
.Ipv6EroBackupBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6EroBackup>> augmentationType)
Remove an augmentation from this builder's product.Ipv6EroBackupBuilder
setAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6AddressNoZone value)
Set the property corresponding toEroIpv6Address.getAddress()
to the specified value.Ipv6EroBackupBuilder
setLoose(Boolean value)
Set the property corresponding toEroFlags.getLoose()
to the specified value.
-
-
-
Constructor Detail
-
Ipv6EroBackupBuilder
public Ipv6EroBackupBuilder()
Construct an empty builder.
-
Ipv6EroBackupBuilder
public Ipv6EroBackupBuilder(EroIpv6Address arg)
Construct a new builder initialized from specifiedEroIpv6Address
.- Parameters:
arg
- EroIpv6Address from which the builder should be initialized
-
Ipv6EroBackupBuilder
public Ipv6EroBackupBuilder(EroFlags arg)
Construct a new builder initialized from specifiedEroFlags
.- Parameters:
arg
- EroFlags from which the builder should be initialized
-
Ipv6EroBackupBuilder
public Ipv6EroBackupBuilder(Ipv6EroBackup base)
Construct a builder initialized with state from specifiedIpv6EroBackup
.- Parameters:
base
- Ipv6EroBackup from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6AddressNoZone getAddress()
Return current value associated with the property corresponding toEroIpv6Address.getAddress()
.- Returns:
- current value
-
getLoose
public Boolean getLoose()
Return current value associated with the property corresponding toEroFlags.getLoose()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6EroBackup>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAddress
public Ipv6EroBackupBuilder setAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6AddressNoZone value)
Set the property corresponding toEroIpv6Address.getAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLoose
public Ipv6EroBackupBuilder setLoose(Boolean value)
Set the property corresponding toEroFlags.getLoose()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public Ipv6EroBackupBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6EroBackup> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public Ipv6EroBackupBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6EroBackup>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull Ipv6EroBackup build()
A newIpv6EroBackup
instance.- Returns:
- A new
Ipv6EroBackup
instance.
-
-