Class Ipv4EroBackupBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.segment.routing.ext.rev200120.binding.sub.tlvs.binding.sub.tlv.ipv4.ero.backup._case.Ipv4EroBackupBuilder
-
@Generated("mdsal-binding-generator") public class Ipv4EroBackupBuilder extends Object
Class that buildsIpv4EroBackup
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
Ipv4EroBackup createIpv4EroBackup(int fooXyzzy, int barBaz) { return new Ipv4EroBackupBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of Ipv4EroBackup, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
Ipv4EroBackup
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description Ipv4EroBackupBuilder()
Construct an empty builder.Ipv4EroBackupBuilder(Ipv4EroBackup base)
Construct a builder initialized with state from specifiedIpv4EroBackup
.Ipv4EroBackupBuilder(EroFlags arg)
Construct a new builder initialized from specifiedEroFlags
.Ipv4EroBackupBuilder(EroIpv4Address arg)
Construct a new builder initialized from specifiedEroIpv4Address
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description Ipv4EroBackupBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Ipv4EroBackup> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv4EroBackup>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull Ipv4EroBackup
build()
A newIpv4EroBackup
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone
getAddress()
Return current value associated with the property corresponding toEroIpv4Address.getAddress()
.Boolean
getLoose()
Return current value associated with the property corresponding toEroFlags.getLoose()
.Ipv4EroBackupBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv4EroBackup>> augmentationType)
Remove an augmentation from this builder's product.Ipv4EroBackupBuilder
setAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone value)
Set the property corresponding toEroIpv4Address.getAddress()
to the specified value.Ipv4EroBackupBuilder
setLoose(Boolean value)
Set the property corresponding toEroFlags.getLoose()
to the specified value.
-
-
-
Constructor Detail
-
Ipv4EroBackupBuilder
public Ipv4EroBackupBuilder()
Construct an empty builder.
-
Ipv4EroBackupBuilder
public Ipv4EroBackupBuilder(EroIpv4Address arg)
Construct a new builder initialized from specifiedEroIpv4Address
.- Parameters:
arg
- EroIpv4Address from which the builder should be initialized
-
Ipv4EroBackupBuilder
public Ipv4EroBackupBuilder(EroFlags arg)
Construct a new builder initialized from specifiedEroFlags
.- Parameters:
arg
- EroFlags from which the builder should be initialized
-
Ipv4EroBackupBuilder
public Ipv4EroBackupBuilder(Ipv4EroBackup base)
Construct a builder initialized with state from specifiedIpv4EroBackup
.- Parameters:
base
- Ipv4EroBackup from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAddress
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone getAddress()
Return current value associated with the property corresponding toEroIpv4Address.getAddress()
.- Returns:
- current value
-
getLoose
public Boolean getLoose()
Return current value associated with the property corresponding toEroFlags.getLoose()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv4EroBackup>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAddress
public Ipv4EroBackupBuilder setAddress(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4AddressNoZone value)
Set the property corresponding toEroIpv4Address.getAddress()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLoose
public Ipv4EroBackupBuilder setLoose(Boolean value)
Set the property corresponding toEroFlags.getLoose()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public Ipv4EroBackupBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Ipv4EroBackup> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public Ipv4EroBackupBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv4EroBackup>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull Ipv4EroBackup build()
A newIpv4EroBackup
instance.- Returns:
- A new
Ipv4EroBackup
instance.
-
-