Package org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.mvpn.rev200120.mvpn.routes
Class MvpnRouteBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.mvpn.rev200120.mvpn.routes.MvpnRouteBuilder
-
@Generated("mdsal-binding-generator") public class MvpnRouteBuilder extends Object
Class that buildsMvpnRoute
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
MvpnRoute createMvpnRoute(int fooXyzzy, int barBaz) { return new MvpnRouteBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of MvpnRoute, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
MvpnRoute
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description MvpnRouteBuilder()
Construct an empty builder.MvpnRouteBuilder(PathAttributes arg)
Construct a new builder initialized from specifiedPathAttributes
.MvpnRouteBuilder(PathIdGrouping arg)
Construct a new builder initialized from specifiedPathIdGrouping
.MvpnRouteBuilder(BgpRibRoute arg)
Construct a new builder initialized from specifiedBgpRibRoute
.MvpnRouteBuilder(Mvpn arg)
Construct a new builder initialized from specifiedMvpn
.MvpnRouteBuilder(MvpnRoute base)
Construct a builder initialized with state from specifiedMvpnRoute
.MvpnRouteBuilder(MvpnBgpRibRoute arg)
Construct a new builder initialized from specifiedMvpnBgpRibRoute
.MvpnRouteBuilder(Route arg)
Construct a new builder initialized from specifiedRoute
.MvpnRouteBuilder(BgpRibRoute arg)
Construct a new builder initialized from specifiedBgpRibRoute
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description MvpnRouteBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<MvpnRoute> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<MvpnRoute>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull MvpnRoute
build()
A newMvpnRoute
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Attributes
getAttributes()
Return current value associated with the property corresponding toPathAttributes.getAttributes()
.MvpnChoice
getMvpnChoice()
Return current value associated with the property corresponding toMvpn.getMvpnChoice()
.PathId
getPathId()
Return current value associated with the property corresponding toPathIdGrouping.getPathId()
.String
getRouteKey()
Return current value associated with the property corresponding toRoute.getRouteKey()
.MvpnRouteKey
key()
Return current value associated with the property corresponding toMvpnRoute.key()
.MvpnRouteBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<MvpnRoute>> augmentationType)
Remove an augmentation from this builder's product.MvpnRouteBuilder
setAttributes(Attributes value)
Set the property corresponding toPathAttributes.getAttributes()
to the specified value.MvpnRouteBuilder
setMvpnChoice(MvpnChoice value)
Set the property corresponding toMvpn.getMvpnChoice()
to the specified value.MvpnRouteBuilder
setPathId(PathId value)
Set the property corresponding toPathIdGrouping.getPathId()
to the specified value.MvpnRouteBuilder
setRouteKey(String value)
Set the property corresponding toRoute.getRouteKey()
to the specified value.MvpnRouteBuilder
withKey(MvpnRouteKey key)
-
-
-
Constructor Detail
-
MvpnRouteBuilder
public MvpnRouteBuilder()
Construct an empty builder.
-
MvpnRouteBuilder
public MvpnRouteBuilder(MvpnBgpRibRoute arg)
Construct a new builder initialized from specifiedMvpnBgpRibRoute
.- Parameters:
arg
- MvpnBgpRibRoute from which the builder should be initialized
-
MvpnRouteBuilder
public MvpnRouteBuilder(Mvpn arg)
Construct a new builder initialized from specifiedMvpn
.- Parameters:
arg
- Mvpn from which the builder should be initialized
-
MvpnRouteBuilder
public MvpnRouteBuilder(BgpRibRoute arg)
Construct a new builder initialized from specifiedBgpRibRoute
.- Parameters:
arg
- BgpRibRoute from which the builder should be initialized
-
MvpnRouteBuilder
public MvpnRouteBuilder(BgpRibRoute arg)
Construct a new builder initialized from specifiedBgpRibRoute
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pmsi.tunnel.rev200120.BgpRibRoute from which the builder should be initialized
-
MvpnRouteBuilder
public MvpnRouteBuilder(Route arg)
Construct a new builder initialized from specifiedRoute
.- Parameters:
arg
- Route from which the builder should be initialized
-
MvpnRouteBuilder
public MvpnRouteBuilder(PathIdGrouping arg)
Construct a new builder initialized from specifiedPathIdGrouping
.- Parameters:
arg
- PathIdGrouping from which the builder should be initialized
-
MvpnRouteBuilder
public MvpnRouteBuilder(PathAttributes arg)
Construct a new builder initialized from specifiedPathAttributes
.- Parameters:
arg
- PathAttributes from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
key
public MvpnRouteKey key()
Return current value associated with the property corresponding toMvpnRoute.key()
.- Returns:
- current value
-
getAttributes
public Attributes getAttributes()
Return current value associated with the property corresponding toPathAttributes.getAttributes()
.- Returns:
- current value
-
getMvpnChoice
public MvpnChoice getMvpnChoice()
Return current value associated with the property corresponding toMvpn.getMvpnChoice()
.- Returns:
- current value
-
getPathId
public PathId getPathId()
Return current value associated with the property corresponding toPathIdGrouping.getPathId()
.- Returns:
- current value
-
getRouteKey
public String getRouteKey()
Return current value associated with the property corresponding toRoute.getRouteKey()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<MvpnRoute>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
withKey
public MvpnRouteBuilder withKey(MvpnRouteKey key)
-
setAttributes
public MvpnRouteBuilder setAttributes(Attributes value)
Set the property corresponding toPathAttributes.getAttributes()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMvpnChoice
public MvpnRouteBuilder setMvpnChoice(MvpnChoice value)
Set the property corresponding toMvpn.getMvpnChoice()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPathId
public MvpnRouteBuilder setPathId(PathId value)
Set the property corresponding toPathIdGrouping.getPathId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRouteKey
public MvpnRouteBuilder setRouteKey(String value)
Set the property corresponding toRoute.getRouteKey()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public MvpnRouteBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<MvpnRoute> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public MvpnRouteBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<MvpnRoute>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
-