Class AddFlowCaseDataBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflowplugin.extension.onf.bundle.service.rev170124.bundle.inner.message.grouping.bundle.inner.message.bundle.add.flow._case.AddFlowCaseDataBuilder
-
@Generated("mdsal-binding-generator") public class AddFlowCaseDataBuilder extends Object
Class that buildsAddFlowCaseData
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
AddFlowCaseData createAddFlowCaseData(int fooXyzzy, int barBaz) { return new AddFlowCaseDataBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of AddFlowCaseData, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
AddFlowCaseData
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description AddFlowCaseDataBuilder()
Construct an empty builder.AddFlowCaseDataBuilder(Flow arg)
Construct a new builder initialized from specifiedFlow
.AddFlowCaseDataBuilder(GenericFlowAttributes arg)
Construct a new builder initialized from specifiedGenericFlowAttributes
.AddFlowCaseDataBuilder(AddFlowCaseData base)
Construct a builder initialized with state from specifiedAddFlowCaseData
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description AddFlowCaseDataBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddFlowCaseData> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddFlowCaseData>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull AddFlowCaseData
build()
A newAddFlowCaseData
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getBarrier()
Return current value associated with the property corresponding toFlow.getBarrier()
.org.opendaylight.yangtools.yang.common.Uint32
getBufferId()
Return current value associated with the property corresponding toFlow.getBufferId()
.String
getContainerName()
Return current value associated with the property corresponding toFlow.getContainerName()
.FlowCookie
getCookie()
Return current value associated with the property corresponding toGenericFlowAttributes.getCookie()
.FlowCookie
getCookieMask()
Return current value associated with the property corresponding toFlow.getCookieMask()
.FlowModFlags
getFlags()
Return current value associated with the property corresponding toFlow.getFlags()
.String
getFlowName()
Return current value associated with the property corresponding toFlow.getFlowName()
.org.opendaylight.yangtools.yang.common.Uint16
getHardTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getHardTimeout()
.org.opendaylight.yangtools.yang.common.Uint16
getIdleTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getIdleTimeout()
.Boolean
getInstallHw()
Return current value associated with the property corresponding toFlow.getInstallHw()
.Instructions
getInstructions()
Return current value associated with the property corresponding toFlow.getInstructions()
.Match
getMatch()
Return current value associated with the property corresponding toFlow.getMatch()
.org.opendaylight.yangtools.yang.common.Uint32
getOutGroup()
Return current value associated with the property corresponding toFlow.getOutGroup()
.org.opendaylight.yangtools.yang.common.Uint64
getOutPort()
Return current value associated with the property corresponding toFlow.getOutPort()
.org.opendaylight.yangtools.yang.common.Uint16
getPriority()
Return current value associated with the property corresponding toGenericFlowAttributes.getPriority()
.Boolean
getStrict()
Return current value associated with the property corresponding toFlow.getStrict()
.org.opendaylight.yangtools.yang.common.Uint8
getTableId()
Return current value associated with the property corresponding toGenericFlowAttributes.getTableId()
.AddFlowCaseDataBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddFlowCaseData>> augmentationType)
Remove an augmentation from this builder's product.AddFlowCaseDataBuilder
setBarrier(Boolean value)
Set the property corresponding toFlow.getBarrier()
to the specified value.AddFlowCaseDataBuilder
setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getBufferId()
to the specified value.AddFlowCaseDataBuilder
setContainerName(String value)
Set the property corresponding toFlow.getContainerName()
to the specified value.AddFlowCaseDataBuilder
setCookie(FlowCookie value)
Set the property corresponding toGenericFlowAttributes.getCookie()
to the specified value.AddFlowCaseDataBuilder
setCookieMask(FlowCookie value)
Set the property corresponding toFlow.getCookieMask()
to the specified value.AddFlowCaseDataBuilder
setFlags(FlowModFlags value)
Set the property corresponding toFlow.getFlags()
to the specified value.AddFlowCaseDataBuilder
setFlowName(String value)
Set the property corresponding toFlow.getFlowName()
to the specified value.AddFlowCaseDataBuilder
setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getHardTimeout()
to the specified value.AddFlowCaseDataBuilder
setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getIdleTimeout()
to the specified value.AddFlowCaseDataBuilder
setInstallHw(Boolean value)
Set the property corresponding toFlow.getInstallHw()
to the specified value.AddFlowCaseDataBuilder
setInstructions(Instructions value)
Set the property corresponding toFlow.getInstructions()
to the specified value.AddFlowCaseDataBuilder
setMatch(Match value)
Set the property corresponding toFlow.getMatch()
to the specified value.AddFlowCaseDataBuilder
setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getOutGroup()
to the specified value.AddFlowCaseDataBuilder
setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlow.getOutPort()
to the specified value.AddFlowCaseDataBuilder
setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getPriority()
to the specified value.AddFlowCaseDataBuilder
setStrict(Boolean value)
Set the property corresponding toFlow.getStrict()
to the specified value.AddFlowCaseDataBuilder
setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGenericFlowAttributes.getTableId()
to the specified value.
-
-
-
Constructor Detail
-
AddFlowCaseDataBuilder
public AddFlowCaseDataBuilder()
Construct an empty builder.
-
AddFlowCaseDataBuilder
public AddFlowCaseDataBuilder(Flow arg)
Construct a new builder initialized from specifiedFlow
.- Parameters:
arg
- Flow from which the builder should be initialized
-
AddFlowCaseDataBuilder
public AddFlowCaseDataBuilder(GenericFlowAttributes arg)
Construct a new builder initialized from specifiedGenericFlowAttributes
.- Parameters:
arg
- GenericFlowAttributes from which the builder should be initialized
-
AddFlowCaseDataBuilder
public AddFlowCaseDataBuilder(AddFlowCaseData base)
Construct a builder initialized with state from specifiedAddFlowCaseData
.- Parameters:
base
- AddFlowCaseData from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBarrier
public Boolean getBarrier()
Return current value associated with the property corresponding toFlow.getBarrier()
.- Returns:
- current value
-
getBufferId
public org.opendaylight.yangtools.yang.common.Uint32 getBufferId()
Return current value associated with the property corresponding toFlow.getBufferId()
.- Returns:
- current value
-
getContainerName
public String getContainerName()
Return current value associated with the property corresponding toFlow.getContainerName()
.- Returns:
- current value
-
getCookie
public FlowCookie getCookie()
Return current value associated with the property corresponding toGenericFlowAttributes.getCookie()
.- Returns:
- current value
-
getCookieMask
public FlowCookie getCookieMask()
Return current value associated with the property corresponding toFlow.getCookieMask()
.- Returns:
- current value
-
getFlags
public FlowModFlags getFlags()
Return current value associated with the property corresponding toFlow.getFlags()
.- Returns:
- current value
-
getFlowName
public String getFlowName()
Return current value associated with the property corresponding toFlow.getFlowName()
.- Returns:
- current value
-
getHardTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getHardTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getHardTimeout()
.- Returns:
- current value
-
getIdleTimeout
public org.opendaylight.yangtools.yang.common.Uint16 getIdleTimeout()
Return current value associated with the property corresponding toGenericFlowAttributes.getIdleTimeout()
.- Returns:
- current value
-
getInstallHw
public Boolean getInstallHw()
Return current value associated with the property corresponding toFlow.getInstallHw()
.- Returns:
- current value
-
getInstructions
public Instructions getInstructions()
Return current value associated with the property corresponding toFlow.getInstructions()
.- Returns:
- current value
-
getMatch
public Match getMatch()
Return current value associated with the property corresponding toFlow.getMatch()
.- Returns:
- current value
-
getOutGroup
public org.opendaylight.yangtools.yang.common.Uint32 getOutGroup()
Return current value associated with the property corresponding toFlow.getOutGroup()
.- Returns:
- current value
-
getOutPort
public org.opendaylight.yangtools.yang.common.Uint64 getOutPort()
Return current value associated with the property corresponding toFlow.getOutPort()
.- Returns:
- current value
-
getPriority
public org.opendaylight.yangtools.yang.common.Uint16 getPriority()
Return current value associated with the property corresponding toGenericFlowAttributes.getPriority()
.- Returns:
- current value
-
getStrict
public Boolean getStrict()
Return current value associated with the property corresponding toFlow.getStrict()
.- Returns:
- current value
-
getTableId
public org.opendaylight.yangtools.yang.common.Uint8 getTableId()
Return current value associated with the property corresponding toGenericFlowAttributes.getTableId()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<AddFlowCaseData>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBarrier
public AddFlowCaseDataBuilder setBarrier(Boolean value)
Set the property corresponding toFlow.getBarrier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBufferId
public AddFlowCaseDataBuilder setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getBufferId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setContainerName
public AddFlowCaseDataBuilder setContainerName(String value)
Set the property corresponding toFlow.getContainerName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookie
public AddFlowCaseDataBuilder setCookie(FlowCookie value)
Set the property corresponding toGenericFlowAttributes.getCookie()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCookieMask
public AddFlowCaseDataBuilder setCookieMask(FlowCookie value)
Set the property corresponding toFlow.getCookieMask()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlags
public AddFlowCaseDataBuilder setFlags(FlowModFlags value)
Set the property corresponding toFlow.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowName
public AddFlowCaseDataBuilder setFlowName(String value)
Set the property corresponding toFlow.getFlowName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHardTimeout
public AddFlowCaseDataBuilder setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getHardTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIdleTimeout
public AddFlowCaseDataBuilder setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getIdleTimeout()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstallHw
public AddFlowCaseDataBuilder setInstallHw(Boolean value)
Set the property corresponding toFlow.getInstallHw()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setInstructions
public AddFlowCaseDataBuilder setInstructions(Instructions value)
Set the property corresponding toFlow.getInstructions()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMatch
public AddFlowCaseDataBuilder setMatch(Match value)
Set the property corresponding toFlow.getMatch()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutGroup
public AddFlowCaseDataBuilder setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlow.getOutGroup()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setOutPort
public AddFlowCaseDataBuilder setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFlow.getOutPort()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPriority
public AddFlowCaseDataBuilder setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toGenericFlowAttributes.getPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setStrict
public AddFlowCaseDataBuilder setStrict(Boolean value)
Set the property corresponding toFlow.getStrict()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTableId
public AddFlowCaseDataBuilder setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toGenericFlowAttributes.getTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public AddFlowCaseDataBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<AddFlowCaseData> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public AddFlowCaseDataBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<AddFlowCaseData>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull AddFlowCaseData build()
A newAddFlowCaseData
instance.- Returns:
- A new
AddFlowCaseData
instance.
-
-