Package org.opendaylight.yang.gen.v1.urn.opendaylight.flow.service.rev130819

Class RemoveFlowInputBuilder

java.lang.Object
org.opendaylight.yang.gen.v1.urn.opendaylight.flow.service.rev130819.RemoveFlowInputBuilder
@Generated("mdsal-binding-generator") public class RemoveFlowInputBuilder extends Object
Class that builds RemoveFlowInput instances. Overall design of the class is that of a fluent interface, where method chaining is used.

In general, this class is supposed to be used like this template: 

   
     RemoveFlowInput createRemoveFlowInput(int fooXyzzy, int barBaz) {
         return new RemoveFlowInputBuilder()
             .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build())
             .setBar(new BarBuilder().setBaz(barBaz).build())
             .build();
     }

This pattern is supported by the immutable nature of RemoveFlowInput, as instances can be freely passed around without worrying about synchronization issues.

As a side note: method chaining results in:

  • very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is on the stack, so further method invocations just need to fill method arguments for the next method invocation, which is terminated by build(), which is then returned from the method
  • better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
  • better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
See Also:

  • Constructor Details

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder()
      Construct an empty builder.

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder(TransactionMetadata arg)
      Construct a new builder initialized from specified TransactionMetadata.
      Parameters:
      arg - TransactionMetadata from which the builder should be initialized

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder(NodeFlow arg)
      Construct a new builder initialized from specified NodeFlow.
      Parameters:
      arg - NodeFlow from which the builder should be initialized

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder(NodeContextRef arg)
      Construct a new builder initialized from specified NodeContextRef.
      Parameters:
      arg - NodeContextRef from which the builder should be initialized

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder(Flow arg)
      Construct a new builder initialized from specified Flow.
      Parameters:
      arg - Flow from which the builder should be initialized

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder(GenericFlowAttributes arg)
      Construct a new builder initialized from specified GenericFlowAttributes.
      Parameters:
      arg - GenericFlowAttributes from which the builder should be initialized

    • RemoveFlowInputBuilder

      public RemoveFlowInputBuilder(RemoveFlowInput base)
      Construct a builder initialized with state from specified RemoveFlowInput.
      Parameters:
      base - RemoveFlowInput from which the builder should be initialized

  • Method Details

    • fieldsFrom

      public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
      Set fields from given grouping argument. Valid argument is instance of one of following types:
      Parameters:
      arg - grouping object
      Throws:
      IllegalArgumentException - if given argument is none of valid types or has property with incompatible value

    • getBarrier

      public Boolean getBarrier()
      Return current value associated with the property corresponding to Flow.getBarrier().
      Returns:
      current value

    • getBufferId

      public org.opendaylight.yangtools.yang.common.Uint32 getBufferId()
      Return current value associated with the property corresponding to Flow.getBufferId().
      Returns:
      current value

    • getContainerName

      public String getContainerName()
      Return current value associated with the property corresponding to Flow.getContainerName().
      Returns:
      current value

    • getCookie

      public FlowCookie getCookie()
      Return current value associated with the property corresponding to GenericFlowAttributes.getCookie().
      Returns:
      current value

    • getCookieMask

      public FlowCookie getCookieMask()
      Return current value associated with the property corresponding to Flow.getCookieMask().
      Returns:
      current value

    • getFlags

      public FlowModFlags getFlags()
      Return current value associated with the property corresponding to Flow.getFlags().
      Returns:
      current value

    • getFlowName

      public String getFlowName()
      Return current value associated with the property corresponding to Flow.getFlowName().
      Returns:
      current value

    • getFlowRef

      public FlowRef getFlowRef()
      Return current value associated with the property corresponding to RemoveFlowInput.getFlowRef().
      Returns:
      current value

    • getFlowTable

      public FlowTableRef getFlowTable()
      Return current value associated with the property corresponding to NodeFlow.getFlowTable().
      Returns:
      current value

    • getHardTimeout

      public org.opendaylight.yangtools.yang.common.Uint16 getHardTimeout()
      Return current value associated with the property corresponding to GenericFlowAttributes.getHardTimeout().
      Returns:
      current value

    • getIdleTimeout

      public org.opendaylight.yangtools.yang.common.Uint16 getIdleTimeout()
      Return current value associated with the property corresponding to GenericFlowAttributes.getIdleTimeout().
      Returns:
      current value

    • getInstallHw

      public Boolean getInstallHw()
      Return current value associated with the property corresponding to Flow.getInstallHw().
      Returns:
      current value

    • getInstructions

      public Instructions getInstructions()
      Return current value associated with the property corresponding to Flow.getInstructions().
      Returns:
      current value

    • getMatch

      public Match getMatch()
      Return current value associated with the property corresponding to Flow.getMatch().
      Returns:
      current value

    • getNode

      public NodeRef getNode()
      Return current value associated with the property corresponding to NodeContextRef.getNode().
      Returns:
      current value

    • getOutGroup

      public org.opendaylight.yangtools.yang.common.Uint32 getOutGroup()
      Return current value associated with the property corresponding to Flow.getOutGroup().
      Returns:
      current value

    • getOutPort

      public org.opendaylight.yangtools.yang.common.Uint64 getOutPort()
      Return current value associated with the property corresponding to Flow.getOutPort().
      Returns:
      current value

    • getPriority

      public org.opendaylight.yangtools.yang.common.Uint16 getPriority()
      Return current value associated with the property corresponding to GenericFlowAttributes.getPriority().
      Returns:
      current value

    • getStrict

      public Boolean getStrict()
      Return current value associated with the property corresponding to Flow.getStrict().
      Returns:
      current value

    • getTableId

      public org.opendaylight.yangtools.yang.common.Uint8 getTableId()
      Return current value associated with the property corresponding to GenericFlowAttributes.getTableId().
      Returns:
      current value

    • getTransactionUri

      public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri getTransactionUri()
      Return current value associated with the property corresponding to TransactionMetadata.getTransactionUri().
      Returns:
      current value

    • augmentation

      public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowInput>> E$$ augmentation(Class<E$$> augmentationType)
      Return the specified augmentation, if it is present in this builder.
      Type Parameters:
      E$$ - augmentation type
      Parameters:
      augmentationType - augmentation type class
      Returns:
      Augmentation object from this builder, or null if not present
      Throws:
      NullPointerException - if augmentType is null

    • setBarrier

      public RemoveFlowInputBuilder setBarrier(Boolean value)
      Set the property corresponding to Flow.getBarrier() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setBufferId

      public RemoveFlowInputBuilder setBufferId(org.opendaylight.yangtools.yang.common.Uint32 value)
      Set the property corresponding to Flow.getBufferId() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setContainerName

      public RemoveFlowInputBuilder setContainerName(String value)
      Set the property corresponding to Flow.getContainerName() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setCookie

      public RemoveFlowInputBuilder setCookie(FlowCookie value)
      Set the property corresponding to GenericFlowAttributes.getCookie() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setCookieMask

      public RemoveFlowInputBuilder setCookieMask(FlowCookie value)
      Set the property corresponding to Flow.getCookieMask() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setFlags

      public RemoveFlowInputBuilder setFlags(FlowModFlags value)
      Set the property corresponding to Flow.getFlags() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setFlowName

      public RemoveFlowInputBuilder setFlowName(String value)
      Set the property corresponding to Flow.getFlowName() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setFlowRef

      public RemoveFlowInputBuilder setFlowRef(FlowRef value)
      Set the property corresponding to RemoveFlowInput.getFlowRef() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setFlowTable

      public RemoveFlowInputBuilder setFlowTable(FlowTableRef value)
      Set the property corresponding to NodeFlow.getFlowTable() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setHardTimeout

      public RemoveFlowInputBuilder setHardTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to GenericFlowAttributes.getHardTimeout() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setIdleTimeout

      public RemoveFlowInputBuilder setIdleTimeout(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to GenericFlowAttributes.getIdleTimeout() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setInstallHw

      public RemoveFlowInputBuilder setInstallHw(Boolean value)
      Set the property corresponding to Flow.getInstallHw() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setInstructions

      public RemoveFlowInputBuilder setInstructions(Instructions value)
      Set the property corresponding to Flow.getInstructions() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setMatch

      public RemoveFlowInputBuilder setMatch(Match value)
      Set the property corresponding to Flow.getMatch() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setNode

      public RemoveFlowInputBuilder setNode(NodeRef value)
      Set the property corresponding to NodeContextRef.getNode() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setOutGroup

      public RemoveFlowInputBuilder setOutGroup(org.opendaylight.yangtools.yang.common.Uint32 value)
      Set the property corresponding to Flow.getOutGroup() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setOutPort

      public RemoveFlowInputBuilder setOutPort(org.opendaylight.yangtools.yang.common.Uint64 value)
      Set the property corresponding to Flow.getOutPort() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setPriority

      public RemoveFlowInputBuilder setPriority(org.opendaylight.yangtools.yang.common.Uint16 value)
      Set the property corresponding to GenericFlowAttributes.getPriority() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setStrict

      public RemoveFlowInputBuilder setStrict(Boolean value)
      Set the property corresponding to Flow.getStrict() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setTableId

      public RemoveFlowInputBuilder setTableId(org.opendaylight.yangtools.yang.common.Uint8 value)
      Set the property corresponding to GenericFlowAttributes.getTableId() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • setTransactionUri

      public RemoveFlowInputBuilder setTransactionUri(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Uri value)
      Set the property corresponding to TransactionMetadata.getTransactionUri() to the specified value.
      Parameters:
      value - desired value
      Returns:
      this builder

    • addAugmentation

      public RemoveFlowInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowInput> augmentation)
      Add an augmentation to this builder's product.
      Parameters:
      augmentation - augmentation to be added
      Returns:
      this builder
      Throws:
      NullPointerException - if augmentation is null

    • removeAugmentation

      public RemoveFlowInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<RemoveFlowInput>> augmentationType)
      Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.
      Parameters:
      augmentationType - augmentation type to be removed
      Returns:
      this builder

    • build

      public @NonNull RemoveFlowInput build()
      A new RemoveFlowInput instance.
      Returns:
      A new RemoveFlowInput instance.