Enum Class PCEPErrors
- All Implemented Interfaces:
Serializable
,Comparable<PCEPErrors>
,Constable
Possible errors listed in RFC5440, RFC 5455 and stateful draft.
- See Also:
-
Nested Class Summary
Nested classes/interfaces inherited from class java.lang.Enum
Enum.EnumDesc<E extends Enum<E>>
-
Enum Constant Summary
Enum ConstantDescriptionAttempt to establish a second PCEP session.Segment Routing error: Bad label format.Segment Routing error: ERO subobject with invalid SID value.C bit of the METRIC object set (request rejected).A PCC indicates to a PCE that it can not complete the state synchronization.A PCE indicates to a PCC that it can not process (an otherwise valid) LSP State Report.The PCE cannot satisfy the request due to insufficient memory.Capability not supported.Diffserv-aware TE error: Class-Type and setup priority do not form a configured TE-class.The LSP-DB-VERSION TLV Missing when State Synchronization Avoidance enabled.Delegation for PCE-initiated LSP cannot be revoked.END-POINTS object missing.ERO Object missing for a path in an LSP Update Request where TE-LSP setup is requested.Global concurrent optimization not allowed (GCO extension).Global concurrent optimization not supported (GCO extension).Insufficient memory (GCO extension).Diffserv-aware TE error: Invalid Class-Type.Received an invalid LSP DB Version Number.LSP cleanup TLV missing.LSP Database version mismatch.LSP-DB-VERSION TLV missing.LSP-IDENTIFIERS TLV missing for a path in an LSP Update Request where TE-LSP setup is requested.LSP instantiation error: Internal error.PCE-initiated LSP limit reached.LSP Object missing.LSP is not PCE-initiated.LSP instantiation error: RSVP signaling error.LSP instantiation error: Unacceptable instantiation parameters.Invalid traffic engineering path setup type: Mismatched path setup type.MONITORING object missing.No Keepalive or PCErr message received before the expiration of the KeepWait timer.No Open message received before the expiration of the OpenWait timer.No sufficient LSP change information for incremental LSP state synchronization.Unacceptable but negotiable session characteristics.Unacceptable and non-negotiable session characteristics.Segment Routing error: Non-identical ERO subobjects.Reception of an invalid Open message or a non Open message.Reception of non-StartTLS or non-PCErr message.Non-zero PLSP-ID in LSP initiation request.The PCE is not capable of P2MP computation.Failure, connection without TLS not possible.Not supported object class.Not supported object Type.O bit of the RP object cleared (request rejected).OF bit of the RP object set (request rejected).Objective function not allowed (request rejected).Reception of an object with P flag not set although the P flag must be set according to this specification.P2MP Path computation is not allowed.P2MP Fragmented request failure.The PCE is not capable to satisfy the request due to inconsistent END-POINTS.The PCE is not capable to satisfy the request due to no END-POINTS with leaf type 2.The PCE is not capable to satisfy the request due to no END-POINTS with leaf type 3.The PCE is not capable to satisfy the request due to no END-POINTS with leaf type 4.PCEP version not supported.Reception of a PCErr message proposing unacceptable session characteristics.Failure, connection without TLS possible.A PCE indicates to a PCC that it has exceeded the resource limit allocated for its state, and thus it cannot accept and process its LSP State Report message.RP object missing.RRO missing for a reoptimization request (R bit of the RP object set).Reception of a second Open message with still unacceptable session characteristics.Segment Routing error: Both SID and NAI are absent in ERO subobject.Segment Routing error: Both SID and NAI are absent in RRO subobject.Segment Routing error: Non-identical RRO subobjects.Srp Object missing for a path in an LSP Update Request where TE-LSP setup is requested.Reception of StartTLS after any PCEP exchange.No StartTLS message before StartTLSWait timer expired.SYMBOLIC-PATH-NAME TLV missing.Synchronized path computation request missing.Attempt to trigger a synchronization when the PCE triggered synchronization capability has not been advertised.Attempted LSP Update Request for an LSP identified by an unknown PLSP-ID.Unknown request reference.Unrecognized object class.Unrecognized object Type.Diffserv-aware TE error: Unsupported Class-Type.Segment Routing error: Unsupported number of Segment ERO subobjects.Invalid traffic engineering path setup type: Unsupported path setup type.Attempted LSP Update Request if active stateful PCE capability was not negotiated active PCE.Attempted LSP Update Request for a non- delegated LSP.SYMBOLIC-PATH-NAME in use. -
Method Summary
Modifier and TypeMethodDescriptionstatic PCEPErrors
forValue
(org.opendaylight.yangtools.yang.common.Uint8 errorType, org.opendaylight.yangtools.yang.common.Uint8 errorValue) org.opendaylight.yangtools.yang.common.Uint8
org.opendaylight.yangtools.yang.common.Uint8
static PCEPErrors
Returns the enum constant of this class with the specified name.static PCEPErrors[]
values()
Returns an array containing the constants of this enum class, in the order they are declared.
-
Enum Constant Details
-
NON_OR_INVALID_OPEN_MSG
Reception of an invalid Open message or a non Open message. -
NO_OPEN_BEFORE_EXP_OPENWAIT
No Open message received before the expiration of the OpenWait timer. -
NON_ACC_NON_NEG_SESSION_CHAR
Unacceptable and non-negotiable session characteristics. -
NON_ACC_NEG_SESSION_CHAR
Unacceptable but negotiable session characteristics. -
SECOND_OPEN_MSG
Reception of a second Open message with still unacceptable session characteristics. -
PCERR_NON_ACC_SESSION_CHAR
Reception of a PCErr message proposing unacceptable session characteristics. -
NO_MSG_BEFORE_EXP_KEEPWAIT
No Keepalive or PCErr message received before the expiration of the KeepWait timer. -
CAPABILITY_NOT_SUPPORTED
Capability not supported. -
PCEP_VERSION_NOT_SUPPORTED
PCEP version not supported. -
UNRECOGNIZED_OBJ_CLASS
Unrecognized object class. -
UNRECOGNIZED_OBJ_TYPE
Unrecognized object Type. -
NOT_SUPPORTED_OBJ_CLASS
Not supported object class. -
NOT_SUPPORTED_OBJ_TYPE
Not supported object Type. -
C_BIT_SET
C bit of the METRIC object set (request rejected). -
O_BIT_SET
O bit of the RP object cleared (request rejected). -
OF_NOT_ALLOWED
Objective function not allowed (request rejected). -
OF_BIT_SET
OF bit of the RP object set (request rejected). -
GCO_NOT_ALLOWED
Global concurrent optimization not allowed (GCO extension). -
P2MP_COMPUTATION_NOT_ALLOWED
P2MP Path computation is not allowed. -
RP_MISSING
RP object missing. -
RRO_MISSING
RRO missing for a reoptimization request (R bit of the RP object set). -
END_POINTS_MISSING
END-POINTS object missing. -
LSP_CLEANUP_TLV_MISSING
LSP cleanup TLV missing. -
SYMBOLIC_PATH_NAME_MISSING
SYMBOLIC-PATH-NAME TLV missing. -
SYNC_PATH_COMP_REQ_MISSING
Synchronized path computation request missing. -
UNKNOWN_REQ_REF
Unknown request reference. -
ATTEMPT_2ND_SESSION
Attempt to establish a second PCEP session. -
LSP_MISSING
LSP Object missing. -
ERO_MISSING
ERO Object missing for a path in an LSP Update Request where TE-LSP setup is requested. -
SRP_MISSING
Srp Object missing for a path in an LSP Update Request where TE-LSP setup is requested. -
LSP_IDENTIFIERS_TLV_MISSING
LSP-IDENTIFIERS TLV missing for a path in an LSP Update Request where TE-LSP setup is requested. -
P_FLAG_NOT_SET
Reception of an object with P flag not set although the P flag must be set according to this specification. -
INSUFFICIENT_MEMORY
Insufficient memory (GCO extension). -
GCO_NOT_SUPPORTED
Global concurrent optimization not supported (GCO extension). -
UNSUPPORTED_CT
Diffserv-aware TE error: Unsupported Class-Type. -
INVALID_CT
Diffserv-aware TE error: Invalid Class-Type. -
CT_AND_SETUP_PRIORITY_DO_NOT_FORM_TE_CLASS
Diffserv-aware TE error: Class-Type and setup priority do not form a configured TE-class. -
CANNOT_SATISFY_P2MP_REQUEST_DUE_TO_INSUFFISIENT_MEMMORY
The PCE cannot satisfy the request due to insufficient memory. -
NOT_CAPPABLE_P2MP_COMPUTATION
The PCE is not capable of P2MP computation. -
P2MP_NOT_CAPPABLE_SATISFY_REQ_DUE_LT2
The PCE is not capable to satisfy the request due to no END-POINTS with leaf type 2. -
P2MP_NOT_CAPPABLE_SATISFY_REQ_DUE_LT3
The PCE is not capable to satisfy the request due to no END-POINTS with leaf type 3. -
P2MP_NOT_CAPPABLE_SATISFY_REQ_DUE_LT4
The PCE is not capable to satisfy the request due to no END-POINTS with leaf type 4. -
P2MP_NOT_CAPPABLE_SATISFY_REQ_DUE_INCONSISTENT_EP
The PCE is not capable to satisfy the request due to inconsistent END-POINTS. -
P2MP_FRAGMENTATION_FAILRUE
P2MP Fragmented request failure. -
UPDATE_REQ_FOR_NON_LSP
Attempted LSP Update Request for a non- delegated LSP. The PCEP-ERROR Object is followed by the LSP Object that identifies the LSP. -
UPDATE_REQ_FOR_NO_STATEFUL
Attempted LSP Update Request if active stateful PCE capability was not negotiated active PCE. -
UNKNOWN_PLSP_ID
Attempted LSP Update Request for an LSP identified by an unknown PLSP-ID. -
RESOURCE_LIMIT_EXCEEDED
A PCE indicates to a PCC that it has exceeded the resource limit allocated for its state, and thus it cannot accept and process its LSP State Report message. -
LSP_LIMIT_EXCEEDED
PCE-initiated LSP limit reached. -
DELEGATION_NON_REVOKABLE
Delegation for PCE-initiated LSP cannot be revoked. -
NON_ZERO_PLSPID
Non-zero PLSP-ID in LSP initiation request. -
CANNOT_PROCESS_STATE_REPORT
A PCE indicates to a PCC that it can not process (an otherwise valid) LSP State Report. The PCEP-ERROR Object is followed by the LSP Object that identifies the LSP. -
LSP_DB_VERSION_MISMATCH
LSP Database version mismatch. -
DB_VERSION_TLV_MISSING_WHEN_SYNC_ALLOWED
The LSP-DB-VERSION TLV Missing when State Synchronization Avoidance enabled. -
CANNOT_COMPLETE_STATE_SYNC
A PCC indicates to a PCE that it can not complete the state synchronization. -
USED_SYMBOLIC_PATH_NAME
SYMBOLIC-PATH-NAME in use. -
LSP_UNACC_INST_PARAMS
LSP instantiation error: Unacceptable instantiation parameters. -
LSP_INTERNAL_ERROR
LSP instantiation error: Internal error. -
LSP_RSVP_ERROR
LSP instantiation error: RSVP signaling error. -
BAD_LABEL_VALUE
Segment Routing error: ERO subobject with invalid SID value. -
UNSUPPORTED_NUMBER_OF_SR_ERO_SUBOBJECTS
Segment Routing error: Unsupported number of Segment ERO subobjects. -
BAD_LABEL_FORMAT
Segment Routing error: Bad label format. -
NON_IDENTICAL_ERO_SUBOBJECTS
Segment Routing error: Non-identical ERO subobjects. -
SID_AND_NAI_ABSENT_IN_ERO
Segment Routing error: Both SID and NAI are absent in ERO subobject. -
SID_AND_NAI_ABSENT_IN_RRO
Segment Routing error: Both SID and NAI are absent in RRO subobject. -
SID_NON_IDENTICAL_RRO_SUBOBJECTS
Segment Routing error: Non-identical RRO subobjects. -
UNSUPPORTED_PST
Invalid traffic engineering path setup type: Unsupported path setup type. -
MISMATCHED_PST
Invalid traffic engineering path setup type: Mismatched path setup type. -
MONITORING_OBJECT_MISSING
MONITORING object missing. -
STARTTLS_RCVD_INCORRECTLY
Reception of StartTLS after any PCEP exchange. -
NON_STARTTLS_MSG_RCVD
Reception of non-StartTLS or non-PCErr message. -
NOT_POSSIBLE_WITHOUT_TLS
Failure, connection without TLS not possible. -
POSSIBLE_WITHOUT_TLS
Failure, connection without TLS possible. -
STARTTLS_TIMER_EXP
No StartTLS message before StartTLSWait timer expired. -
LSP_NOT_PCE_INITIATED
LSP is not PCE-initiated. -
LSP_DB_VERSION_MISSING
LSP-DB-VERSION TLV missing. -
UNEXPECTED_SYNCHRONIZATION_ATTEMPT
Attempt to trigger a synchronization when the PCE triggered synchronization capability has not been advertised. -
NO_SUFFICIENT_LSP_CHANGE
No sufficient LSP change information for incremental LSP state synchronization. -
INVALID_LSP_DB_VERSION
Received an invalid LSP DB Version Number.
-
-
Method Details
-
values
Returns an array containing the constants of this enum class, in the order they are declared.- Returns:
- an array containing the constants of this enum class, in the order they are declared
-
valueOf
Returns the enum constant of this class with the specified name. The string must match exactly an identifier used to declare an enum constant in this class. (Extraneous whitespace characters are not permitted.)- Parameters:
name
- the name of the enum constant to be returned.- Returns:
- the enum constant with the specified name
- Throws:
IllegalArgumentException
- if this enum class has no constant with the specified nameNullPointerException
- if the argument is null
-
forValue
public static PCEPErrors forValue(org.opendaylight.yangtools.yang.common.Uint8 errorType, org.opendaylight.yangtools.yang.common.Uint8 errorValue) -
getErrorType
public org.opendaylight.yangtools.yang.common.Uint8 getErrorType() -
getErrorValue
public org.opendaylight.yangtools.yang.common.Uint8 getErrorValue()
-