Package org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.tunnel.pcep.rev181109
Class Link1Builder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.topology.tunnel.pcep.rev181109.Link1Builder
-
@Generated("mdsal-binding-generator") public class Link1Builder extends Object
Class that buildsLink1
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
Link1 createLink1(int fooXyzzy, int barBaz) { return new Link1Builder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of Link1, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
Link1
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description Link1Builder()
Construct an empty builder.Link1Builder(AttributeFilters arg)
Construct a new builder initialized from specifiedAttributeFilters
.Link1Builder(Priority arg)
Construct a new builder initialized from specifiedPriority
.Link1Builder(TunnelAttributes arg)
Construct a new builder initialized from specifiedTunnelAttributes
.Link1Builder(Link1 base)
Construct a builder initialized with state from specifiedLink1
.Link1Builder(TunnelPcepLinkCfgAttributes arg)
Construct a new builder initialized from specifiedTunnelPcepLinkCfgAttributes
.Link1Builder(TunnelPcepLinkOperAttributes arg)
Construct a new builder initialized from specifiedTunnelPcepLinkOperAttributes
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description @NonNull Link1
build()
A newLink1
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Bandwidth
getBandwidth()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
.ClassType
getClassType()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
.AttributeFilter
getExcludeAny()
Return current value associated with the property corresponding toAttributeFilters.getExcludeAny()
.org.opendaylight.yangtools.yang.common.Uint8
getHoldPriority()
Return current value associated with the property corresponding toPriority.getHoldPriority()
.AttributeFilter
getIncludeAll()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAll()
.AttributeFilter
getIncludeAny()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAny()
.Boolean
getLabelRecordingDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLabelRecordingDesired()
.Boolean
getLocalProtectionDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLocalProtectionDesired()
.String
getSessionName()
Return current value associated with the property corresponding toTunnelAttributes.getSessionName()
.Boolean
getSeStyleDesired()
Return current value associated with the property corresponding toTunnelAttributes.getSeStyleDesired()
.org.opendaylight.yangtools.yang.common.Uint8
getSetupPriority()
Return current value associated with the property corresponding toPriority.getSetupPriority()
.String
getSymbolicPathName()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
.Link1Builder
setBandwidth(Bandwidth value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
to the specified value.Link1Builder
setClassType(ClassType value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
to the specified value.Link1Builder
setExcludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getExcludeAny()
to the specified value.Link1Builder
setHoldPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getHoldPriority()
to the specified value.Link1Builder
setIncludeAll(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAll()
to the specified value.Link1Builder
setIncludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAny()
to the specified value.Link1Builder
setLabelRecordingDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLabelRecordingDesired()
to the specified value.Link1Builder
setLocalProtectionDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLocalProtectionDesired()
to the specified value.Link1Builder
setSessionName(String value)
Set the property corresponding toTunnelAttributes.getSessionName()
to the specified value.Link1Builder
setSeStyleDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getSeStyleDesired()
to the specified value.Link1Builder
setSetupPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getSetupPriority()
to the specified value.Link1Builder
setSymbolicPathName(String value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
to the specified value.
-
-
-
Constructor Detail
-
Link1Builder
public Link1Builder()
Construct an empty builder.
-
Link1Builder
public Link1Builder(TunnelPcepLinkCfgAttributes arg)
Construct a new builder initialized from specifiedTunnelPcepLinkCfgAttributes
.- Parameters:
arg
- TunnelPcepLinkCfgAttributes from which the builder should be initialized
-
Link1Builder
public Link1Builder(TunnelAttributes arg)
Construct a new builder initialized from specifiedTunnelAttributes
.- Parameters:
arg
- TunnelAttributes from which the builder should be initialized
-
Link1Builder
public Link1Builder(Priority arg)
Construct a new builder initialized from specifiedPriority
.- Parameters:
arg
- Priority from which the builder should be initialized
-
Link1Builder
public Link1Builder(AttributeFilters arg)
Construct a new builder initialized from specifiedAttributeFilters
.- Parameters:
arg
- AttributeFilters from which the builder should be initialized
-
Link1Builder
public Link1Builder(TunnelPcepLinkOperAttributes arg)
Construct a new builder initialized from specifiedTunnelPcepLinkOperAttributes
.- Parameters:
arg
- TunnelPcepLinkOperAttributes from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getBandwidth
public Bandwidth getBandwidth()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
.- Returns:
- current value
-
getClassType
public ClassType getClassType()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
.- Returns:
- current value
-
getExcludeAny
public AttributeFilter getExcludeAny()
Return current value associated with the property corresponding toAttributeFilters.getExcludeAny()
.- Returns:
- current value
-
getHoldPriority
public org.opendaylight.yangtools.yang.common.Uint8 getHoldPriority()
Return current value associated with the property corresponding toPriority.getHoldPriority()
.- Returns:
- current value
-
getIncludeAll
public AttributeFilter getIncludeAll()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAll()
.- Returns:
- current value
-
getIncludeAny
public AttributeFilter getIncludeAny()
Return current value associated with the property corresponding toAttributeFilters.getIncludeAny()
.- Returns:
- current value
-
getLabelRecordingDesired
public Boolean getLabelRecordingDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLabelRecordingDesired()
.- Returns:
- current value
-
getLocalProtectionDesired
public Boolean getLocalProtectionDesired()
Return current value associated with the property corresponding toTunnelAttributes.getLocalProtectionDesired()
.- Returns:
- current value
-
getSeStyleDesired
public Boolean getSeStyleDesired()
Return current value associated with the property corresponding toTunnelAttributes.getSeStyleDesired()
.- Returns:
- current value
-
getSessionName
public String getSessionName()
Return current value associated with the property corresponding toTunnelAttributes.getSessionName()
.- Returns:
- current value
-
getSetupPriority
public org.opendaylight.yangtools.yang.common.Uint8 getSetupPriority()
Return current value associated with the property corresponding toPriority.getSetupPriority()
.- Returns:
- current value
-
getSymbolicPathName
public String getSymbolicPathName()
Return current value associated with the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
.- Returns:
- current value
-
setBandwidth
public Link1Builder setBandwidth(Bandwidth value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getBandwidth()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setClassType
public Link1Builder setClassType(ClassType value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getClassType()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setExcludeAny
public Link1Builder setExcludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getExcludeAny()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHoldPriority
public Link1Builder setHoldPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getHoldPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIncludeAll
public Link1Builder setIncludeAll(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAll()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIncludeAny
public Link1Builder setIncludeAny(AttributeFilter value)
Set the property corresponding toAttributeFilters.getIncludeAny()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLabelRecordingDesired
public Link1Builder setLabelRecordingDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLabelRecordingDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setLocalProtectionDesired
public Link1Builder setLocalProtectionDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getLocalProtectionDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSeStyleDesired
public Link1Builder setSeStyleDesired(Boolean value)
Set the property corresponding toTunnelAttributes.getSeStyleDesired()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSessionName
public Link1Builder setSessionName(String value)
Set the property corresponding toTunnelAttributes.getSessionName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSetupPriority
public Link1Builder setSetupPriority(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toPriority.getSetupPriority()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSymbolicPathName
public Link1Builder setSymbolicPathName(String value)
Set the property corresponding toTunnelPcepLinkCfgAttributes.getSymbolicPathName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
-