Key-value pairs for configuring rarely used features.other_config : hwaddr:
optional stringAn Ethernet address in the form xx:xx:xx:xx:xx:xx to set
thehardware address of the local port and influence the datapathID.other_config
: forward-bpdu: optional stringeither true or false. Option to allow forwarding
of BPDU frames when NORMALaction is invoked. Frames with reserved
Ethernetaddresses (e.g. STP BPDU) will be forwarded when this optionis enabled
and the switch is not providing that functionality.other_config :
mac-aging-time: optional stringcontaining an integer, at least 1 The maximum
number of seconds to retain aMAC learning entry for which no packets have been
seen. Thedefault is currently 300 seconds (5 minutes). The value, ifspecified,
is forced into a reasonable range, currently 15 to 3600 seconds.other_config :
mac-table-size: optional stringcontaining an integer, at least 1 The maximum
number of MAC addresses tolearn. The default is currently 2048. The value,
ifspecified, is forced into a reasonable range, currently 10to
1,000,000.other_config : datapath-id: optional stringExactly 16 hex digits to
set the OpenFlow datapath ID to aspecific value. May not be
all-zero.other_config : dp-desc: optional stringHuman readable description of
datapath. It it a maximum256 byte-long free-form string to describe the
fordebugging purposes.other_config : disable-in-band: optional stringeither
or falseIf set to true, disable in-band control on the bridgeregardless of
controller and manager settings.other_config : in-band-queue: optional
stringcontaining an integer, in range 0 to 4,294,967,295 A queue ID as
anonnegative integer.other_config : stp-system-id: optional stringThe bridge's
STP identifier (the lower 48 bits of thebridge-id) in the form
xx:xx:xx:xx:xx:xx. By default, theidentifier is the MAC address of the
bridge.other_config : stp-priority: optional stringcontaining an integer, in
range 0 to 65,535 The bridge's relative priorityvalue for determining the root
bridge (the upper 16 bits ofthe bridgeid). A bridge with the lowest bridge-id
electedthe root. By default, the priority is 0x8000.other_config :
stp-hello-time: optional stringcontaining an integer, in range 1 to 10 The
interval between transmissionsof hello messages by designated ports, in
By defaultthe hello interval is 2 seconds.other_config : stp-max-age: optional
stringcontaining an integer, in range 6 to 40 The maximum age of the
informationtransmitted by the bridge when it is the root bridge, inseconds. By
default, the maximum age is 20 seconds.other_config : stp-forward-delay:
optional stringcontaining an integer, in range 4 to 30 The delay to wait
betweentransitioning root and designated ports to forwarding, inseconds. By
default, the forwarding delay is 15 seconds.other_config :
mcast-snooping-aging-time: optional string,containing an integer, at least 1
maximum number ofseconds to retain a multicast snooping entry for which
nopackets have been seen. The default is currently 300seconds (5 minutes). The
value, if specified, is forced intoa reasonable range, currently 15 to 3600
seconds.other_config : mcast-snooping-table-size: optional string,containing an
integer, at least 1 The maximum number ofmulticast snooping addresses to learn.
The default iscurrently 2048. The value, if specified, is forced into
areasonable range, currently 10 to 1,000,000.other_config :
mcast-snooping-disable-flood-unregistered:optional string, either true or false
If set to false,unregistered multicast packets are forwarded to all ports.If
to true, unregistered multicast packets are forwardedto ports connected to
multicast routers.
This class represents the following YANG schema fragment defined in module ovsdb
list bridge-other-configs {
key "bridge-other-config-key";
leaf bridge-other-config-key {
type string;
}
leaf bridge-other-config-value {
type string;
}
}
The schema path to identify an instance is
ovsdb/ovsdb-bridge-attributes/bridge-other-configs
To create instances of this class use BridgeOtherConfigsBuilder
.