Class NxActionNatBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflowjava.nx.action.rev140421.ofpact.actions.ofpact.actions.nx.action.nat._case.NxActionNatBuilder
-
@Generated("mdsal-binding-generator") public class NxActionNatBuilder extends Object
Class that buildsNxActionNat
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
NxActionNat createNxActionNat(int fooXyzzy, int barBaz) { return new NxActionNatBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of NxActionNat, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
NxActionNat
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description NxActionNatBuilder()
Construct an empty builder.NxActionNatBuilder(NxActionNat base)
Construct a builder initialized with state from specifiedNxActionNat
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description NxActionNatBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<NxActionNat> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<NxActionNat>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull NxActionNat
build()
A newNxActionNat
instance.org.opendaylight.yangtools.yang.common.Uint16
getFlags()
Return current value associated with the property corresponding toNxActionNat.getFlags()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress
getIpAddressMax()
Return current value associated with the property corresponding toNxActionNat.getIpAddressMax()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress
getIpAddressMin()
Return current value associated with the property corresponding toNxActionNat.getIpAddressMin()
.org.opendaylight.yangtools.yang.common.Uint16
getPortMax()
Return current value associated with the property corresponding toNxActionNat.getPortMax()
.org.opendaylight.yangtools.yang.common.Uint16
getPortMin()
Return current value associated with the property corresponding toNxActionNat.getPortMin()
.org.opendaylight.yangtools.yang.common.Uint16
getRangePresent()
Return current value associated with the property corresponding toNxActionNat.getRangePresent()
.NxActionNatBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<NxActionNat>> augmentationType)
Remove an augmentation from this builder's product.NxActionNatBuilder
setFlags(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getFlags()
to the specified value.NxActionNatBuilder
setIpAddressMax(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toNxActionNat.getIpAddressMax()
to the specified value.NxActionNatBuilder
setIpAddressMin(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toNxActionNat.getIpAddressMin()
to the specified value.NxActionNatBuilder
setPortMax(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getPortMax()
to the specified value.NxActionNatBuilder
setPortMin(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getPortMin()
to the specified value.NxActionNatBuilder
setRangePresent(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getRangePresent()
to the specified value.
-
-
-
Constructor Detail
-
NxActionNatBuilder
public NxActionNatBuilder()
Construct an empty builder.
-
NxActionNatBuilder
public NxActionNatBuilder(NxActionNat base)
Construct a builder initialized with state from specifiedNxActionNat
.- Parameters:
base
- NxActionNat from which the builder should be initialized
-
-
Method Detail
-
getFlags
public org.opendaylight.yangtools.yang.common.Uint16 getFlags()
Return current value associated with the property corresponding toNxActionNat.getFlags()
.- Returns:
- current value
-
getIpAddressMax
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress getIpAddressMax()
Return current value associated with the property corresponding toNxActionNat.getIpAddressMax()
.- Returns:
- current value
-
getIpAddressMin
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress getIpAddressMin()
Return current value associated with the property corresponding toNxActionNat.getIpAddressMin()
.- Returns:
- current value
-
getPortMax
public org.opendaylight.yangtools.yang.common.Uint16 getPortMax()
Return current value associated with the property corresponding toNxActionNat.getPortMax()
.- Returns:
- current value
-
getPortMin
public org.opendaylight.yangtools.yang.common.Uint16 getPortMin()
Return current value associated with the property corresponding toNxActionNat.getPortMin()
.- Returns:
- current value
-
getRangePresent
public org.opendaylight.yangtools.yang.common.Uint16 getRangePresent()
Return current value associated with the property corresponding toNxActionNat.getRangePresent()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<NxActionNat>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setFlags
public NxActionNatBuilder setFlags(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpAddressMax
public NxActionNatBuilder setIpAddressMax(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toNxActionNat.getIpAddressMax()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpAddressMin
public NxActionNatBuilder setIpAddressMin(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.IpAddress value)
Set the property corresponding toNxActionNat.getIpAddressMin()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPortMax
public NxActionNatBuilder setPortMax(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getPortMax()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPortMin
public NxActionNatBuilder setPortMin(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getPortMin()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRangePresent
public NxActionNatBuilder setRangePresent(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toNxActionNat.getRangePresent()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public NxActionNatBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<NxActionNat> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public NxActionNatBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<NxActionNat>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull NxActionNat build()
A newNxActionNat
instance.- Returns:
- A new
NxActionNat
instance.
-
-