Class PhyPortBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflow.protocol.rev130731.features.reply.PhyPortBuilder
-
@Generated("mdsal-binding-generator") public class PhyPortBuilder extends Object
Class that buildsPhyPort
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
PhyPort createPhyPort(int fooXyzzy, int barBaz) { return new PhyPortBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of PhyPort, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
PhyPort
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description PhyPortBuilder()
Construct an empty builder.PhyPortBuilder(PhyPort base)
Construct a builder initialized with state from specifiedPhyPort
.PhyPortBuilder(PortGrouping arg)
Construct a new builder initialized from specifiedPortGrouping
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description PhyPortBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PhyPort> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PhyPort>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull PhyPort
build()
A newPhyPort
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.PortFeatures
getAdvertisedFeatures()
Return current value associated with the property corresponding toPortGrouping.getAdvertisedFeatures()
.PortFeaturesV10
getAdvertisedFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getAdvertisedFeaturesV10()
.PortConfig
getConfig()
Return current value associated with the property corresponding toPortGrouping.getConfig()
.PortConfigV10
getConfigV10()
Return current value associated with the property corresponding toPortGrouping.getConfigV10()
.PortFeatures
getCurrentFeatures()
Return current value associated with the property corresponding toPortGrouping.getCurrentFeatures()
.PortFeaturesV10
getCurrentFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getCurrentFeaturesV10()
.org.opendaylight.yangtools.yang.common.Uint32
getCurrSpeed()
Return current value associated with the property corresponding toPortGrouping.getCurrSpeed()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress
getHwAddr()
Return current value associated with the property corresponding toPortGrouping.getHwAddr()
.org.opendaylight.yangtools.yang.common.Uint32
getMaxSpeed()
Return current value associated with the property corresponding toPortGrouping.getMaxSpeed()
.String
getName()
Return current value associated with the property corresponding toPortGrouping.getName()
.PortFeatures
getPeerFeatures()
Return current value associated with the property corresponding toPortGrouping.getPeerFeatures()
.PortFeaturesV10
getPeerFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getPeerFeaturesV10()
.org.opendaylight.yangtools.yang.common.Uint32
getPortNo()
Return current value associated with the property corresponding toPortGrouping.getPortNo()
.PortState
getState()
Return current value associated with the property corresponding toPortGrouping.getState()
.PortStateV10
getStateV10()
Return current value associated with the property corresponding toPortGrouping.getStateV10()
.PortFeatures
getSupportedFeatures()
Return current value associated with the property corresponding toPortGrouping.getSupportedFeatures()
.PortFeaturesV10
getSupportedFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getSupportedFeaturesV10()
.PhyPortBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PhyPort>> augmentationType)
Remove an augmentation from this builder's product.PhyPortBuilder
setAdvertisedFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getAdvertisedFeatures()
to the specified value.PhyPortBuilder
setAdvertisedFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getAdvertisedFeaturesV10()
to the specified value.PhyPortBuilder
setConfig(PortConfig value)
Set the property corresponding toPortGrouping.getConfig()
to the specified value.PhyPortBuilder
setConfigV10(PortConfigV10 value)
Set the property corresponding toPortGrouping.getConfigV10()
to the specified value.PhyPortBuilder
setCurrentFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getCurrentFeatures()
to the specified value.PhyPortBuilder
setCurrentFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getCurrentFeaturesV10()
to the specified value.PhyPortBuilder
setCurrSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPortGrouping.getCurrSpeed()
to the specified value.PhyPortBuilder
setHwAddr(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
Set the property corresponding toPortGrouping.getHwAddr()
to the specified value.PhyPortBuilder
setMaxSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPortGrouping.getMaxSpeed()
to the specified value.PhyPortBuilder
setName(String value)
Set the property corresponding toPortGrouping.getName()
to the specified value.PhyPortBuilder
setPeerFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getPeerFeatures()
to the specified value.PhyPortBuilder
setPeerFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getPeerFeaturesV10()
to the specified value.PhyPortBuilder
setPortNo(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPortGrouping.getPortNo()
to the specified value.PhyPortBuilder
setState(PortState value)
Set the property corresponding toPortGrouping.getState()
to the specified value.PhyPortBuilder
setStateV10(PortStateV10 value)
Set the property corresponding toPortGrouping.getStateV10()
to the specified value.PhyPortBuilder
setSupportedFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getSupportedFeatures()
to the specified value.PhyPortBuilder
setSupportedFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getSupportedFeaturesV10()
to the specified value.
-
-
-
Constructor Detail
-
PhyPortBuilder
public PhyPortBuilder()
Construct an empty builder.
-
PhyPortBuilder
public PhyPortBuilder(PortGrouping arg)
Construct a new builder initialized from specifiedPortGrouping
.- Parameters:
arg
- PortGrouping from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getAdvertisedFeatures
public PortFeatures getAdvertisedFeatures()
Return current value associated with the property corresponding toPortGrouping.getAdvertisedFeatures()
.- Returns:
- current value
-
getAdvertisedFeaturesV10
public PortFeaturesV10 getAdvertisedFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getAdvertisedFeaturesV10()
.- Returns:
- current value
-
getConfig
public PortConfig getConfig()
Return current value associated with the property corresponding toPortGrouping.getConfig()
.- Returns:
- current value
-
getConfigV10
public PortConfigV10 getConfigV10()
Return current value associated with the property corresponding toPortGrouping.getConfigV10()
.- Returns:
- current value
-
getCurrSpeed
public org.opendaylight.yangtools.yang.common.Uint32 getCurrSpeed()
Return current value associated with the property corresponding toPortGrouping.getCurrSpeed()
.- Returns:
- current value
-
getCurrentFeatures
public PortFeatures getCurrentFeatures()
Return current value associated with the property corresponding toPortGrouping.getCurrentFeatures()
.- Returns:
- current value
-
getCurrentFeaturesV10
public PortFeaturesV10 getCurrentFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getCurrentFeaturesV10()
.- Returns:
- current value
-
getHwAddr
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getHwAddr()
Return current value associated with the property corresponding toPortGrouping.getHwAddr()
.- Returns:
- current value
-
getMaxSpeed
public org.opendaylight.yangtools.yang.common.Uint32 getMaxSpeed()
Return current value associated with the property corresponding toPortGrouping.getMaxSpeed()
.- Returns:
- current value
-
getName
public String getName()
Return current value associated with the property corresponding toPortGrouping.getName()
.- Returns:
- current value
-
getPeerFeatures
public PortFeatures getPeerFeatures()
Return current value associated with the property corresponding toPortGrouping.getPeerFeatures()
.- Returns:
- current value
-
getPeerFeaturesV10
public PortFeaturesV10 getPeerFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getPeerFeaturesV10()
.- Returns:
- current value
-
getPortNo
public org.opendaylight.yangtools.yang.common.Uint32 getPortNo()
Return current value associated with the property corresponding toPortGrouping.getPortNo()
.- Returns:
- current value
-
getState
public PortState getState()
Return current value associated with the property corresponding toPortGrouping.getState()
.- Returns:
- current value
-
getStateV10
public PortStateV10 getStateV10()
Return current value associated with the property corresponding toPortGrouping.getStateV10()
.- Returns:
- current value
-
getSupportedFeatures
public PortFeatures getSupportedFeatures()
Return current value associated with the property corresponding toPortGrouping.getSupportedFeatures()
.- Returns:
- current value
-
getSupportedFeaturesV10
public PortFeaturesV10 getSupportedFeaturesV10()
Return current value associated with the property corresponding toPortGrouping.getSupportedFeaturesV10()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PhyPort>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setAdvertisedFeatures
public PhyPortBuilder setAdvertisedFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getAdvertisedFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setAdvertisedFeaturesV10
public PhyPortBuilder setAdvertisedFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getAdvertisedFeaturesV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setConfig
public PhyPortBuilder setConfig(PortConfig value)
Set the property corresponding toPortGrouping.getConfig()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setConfigV10
public PhyPortBuilder setConfigV10(PortConfigV10 value)
Set the property corresponding toPortGrouping.getConfigV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrSpeed
public PhyPortBuilder setCurrSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPortGrouping.getCurrSpeed()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrentFeatures
public PhyPortBuilder setCurrentFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getCurrentFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCurrentFeaturesV10
public PhyPortBuilder setCurrentFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getCurrentFeaturesV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setHwAddr
public PhyPortBuilder setHwAddr(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value)
Set the property corresponding toPortGrouping.getHwAddr()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMaxSpeed
public PhyPortBuilder setMaxSpeed(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPortGrouping.getMaxSpeed()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setName
public PhyPortBuilder setName(String value)
Set the property corresponding toPortGrouping.getName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPeerFeatures
public PhyPortBuilder setPeerFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getPeerFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPeerFeaturesV10
public PhyPortBuilder setPeerFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getPeerFeaturesV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPortNo
public PhyPortBuilder setPortNo(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPortGrouping.getPortNo()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setState
public PhyPortBuilder setState(PortState value)
Set the property corresponding toPortGrouping.getState()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setStateV10
public PhyPortBuilder setStateV10(PortStateV10 value)
Set the property corresponding toPortGrouping.getStateV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSupportedFeatures
public PhyPortBuilder setSupportedFeatures(PortFeatures value)
Set the property corresponding toPortGrouping.getSupportedFeatures()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSupportedFeaturesV10
public PhyPortBuilder setSupportedFeaturesV10(PortFeaturesV10 value)
Set the property corresponding toPortGrouping.getSupportedFeaturesV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public PhyPortBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PhyPort> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public PhyPortBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PhyPort>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
-