Class GetFeaturesOutputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.openflow.protocol.rev130731.GetFeaturesOutputBuilder
-
@Generated("mdsal-binding-generator") public class GetFeaturesOutputBuilder extends Object
Class that buildsGetFeaturesOutput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
GetFeaturesOutput createGetFeaturesOutput(int fooXyzzy, int barBaz) { return new GetFeaturesOutputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of GetFeaturesOutput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
GetFeaturesOutput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description GetFeaturesOutputBuilder()
Construct an empty builder.GetFeaturesOutputBuilder(FeaturesReply arg)
Construct a new builder initialized from specifiedFeaturesReply
.GetFeaturesOutputBuilder(GetFeaturesOutput base)
Construct a builder initialized with state from specifiedGetFeaturesOutput
.GetFeaturesOutputBuilder(OfHeader arg)
Construct a new builder initialized from specifiedOfHeader
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description GetFeaturesOutputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<GetFeaturesOutput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<GetFeaturesOutput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull GetFeaturesOutput
build()
A newGetFeaturesOutput
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.ActionTypeV10
getActionsV10()
Return current value associated with the property corresponding toFeaturesReply.getActionsV10()
.org.opendaylight.yangtools.yang.common.Uint8
getAuxiliaryId()
Return current value associated with the property corresponding toFeaturesReply.getAuxiliaryId()
.org.opendaylight.yangtools.yang.common.Uint32
getBuffers()
Return current value associated with the property corresponding toFeaturesReply.getBuffers()
.Capabilities
getCapabilities()
Return current value associated with the property corresponding toFeaturesReply.getCapabilities()
.CapabilitiesV10
getCapabilitiesV10()
Return current value associated with the property corresponding toFeaturesReply.getCapabilitiesV10()
.org.opendaylight.yangtools.yang.common.Uint64
getDatapathId()
Return current value associated with the property corresponding toFeaturesReply.getDatapathId()
.List<PhyPort>
getPhyPort()
Return current value associated with the property corresponding toFeaturesReply.getPhyPort()
.org.opendaylight.yangtools.yang.common.Uint32
getReserved()
Return current value associated with the property corresponding toFeaturesReply.getReserved()
.org.opendaylight.yangtools.yang.common.Uint8
getTables()
Return current value associated with the property corresponding toFeaturesReply.getTables()
.org.opendaylight.yangtools.yang.common.Uint8
getVersion()
Return current value associated with the property corresponding toOfHeader.getVersion()
.org.opendaylight.yangtools.yang.common.Uint32
getXid()
Return current value associated with the property corresponding toOfHeader.getXid()
.GetFeaturesOutputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<GetFeaturesOutput>> augmentationType)
Remove an augmentation from this builder's product.GetFeaturesOutputBuilder
setActionsV10(ActionTypeV10 value)
Set the property corresponding toFeaturesReply.getActionsV10()
to the specified value.GetFeaturesOutputBuilder
setAuxiliaryId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toFeaturesReply.getAuxiliaryId()
to the specified value.GetFeaturesOutputBuilder
setBuffers(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFeaturesReply.getBuffers()
to the specified value.GetFeaturesOutputBuilder
setCapabilities(Capabilities value)
Set the property corresponding toFeaturesReply.getCapabilities()
to the specified value.GetFeaturesOutputBuilder
setCapabilitiesV10(CapabilitiesV10 value)
Set the property corresponding toFeaturesReply.getCapabilitiesV10()
to the specified value.GetFeaturesOutputBuilder
setDatapathId(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFeaturesReply.getDatapathId()
to the specified value.GetFeaturesOutputBuilder
setPhyPort(List<PhyPort> values)
Set the property corresponding toFeaturesReply.getPhyPort()
to the specified value.GetFeaturesOutputBuilder
setReserved(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFeaturesReply.getReserved()
to the specified value.GetFeaturesOutputBuilder
setTables(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toFeaturesReply.getTables()
to the specified value.GetFeaturesOutputBuilder
setVersion(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toOfHeader.getVersion()
to the specified value.GetFeaturesOutputBuilder
setXid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toOfHeader.getXid()
to the specified value.
-
-
-
Constructor Detail
-
GetFeaturesOutputBuilder
public GetFeaturesOutputBuilder()
Construct an empty builder.
-
GetFeaturesOutputBuilder
public GetFeaturesOutputBuilder(FeaturesReply arg)
Construct a new builder initialized from specifiedFeaturesReply
.- Parameters:
arg
- FeaturesReply from which the builder should be initialized
-
GetFeaturesOutputBuilder
public GetFeaturesOutputBuilder(OfHeader arg)
Construct a new builder initialized from specifiedOfHeader
.- Parameters:
arg
- OfHeader from which the builder should be initialized
-
GetFeaturesOutputBuilder
public GetFeaturesOutputBuilder(GetFeaturesOutput base)
Construct a builder initialized with state from specifiedGetFeaturesOutput
.- Parameters:
base
- GetFeaturesOutput from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getActionsV10
public ActionTypeV10 getActionsV10()
Return current value associated with the property corresponding toFeaturesReply.getActionsV10()
.- Returns:
- current value
-
getAuxiliaryId
public org.opendaylight.yangtools.yang.common.Uint8 getAuxiliaryId()
Return current value associated with the property corresponding toFeaturesReply.getAuxiliaryId()
.- Returns:
- current value
-
getBuffers
public org.opendaylight.yangtools.yang.common.Uint32 getBuffers()
Return current value associated with the property corresponding toFeaturesReply.getBuffers()
.- Returns:
- current value
-
getCapabilities
public Capabilities getCapabilities()
Return current value associated with the property corresponding toFeaturesReply.getCapabilities()
.- Returns:
- current value
-
getCapabilitiesV10
public CapabilitiesV10 getCapabilitiesV10()
Return current value associated with the property corresponding toFeaturesReply.getCapabilitiesV10()
.- Returns:
- current value
-
getDatapathId
public org.opendaylight.yangtools.yang.common.Uint64 getDatapathId()
Return current value associated with the property corresponding toFeaturesReply.getDatapathId()
.- Returns:
- current value
-
getPhyPort
public List<PhyPort> getPhyPort()
Return current value associated with the property corresponding toFeaturesReply.getPhyPort()
.- Returns:
- current value
-
getReserved
public org.opendaylight.yangtools.yang.common.Uint32 getReserved()
Return current value associated with the property corresponding toFeaturesReply.getReserved()
.- Returns:
- current value
-
getTables
public org.opendaylight.yangtools.yang.common.Uint8 getTables()
Return current value associated with the property corresponding toFeaturesReply.getTables()
.- Returns:
- current value
-
getVersion
public org.opendaylight.yangtools.yang.common.Uint8 getVersion()
Return current value associated with the property corresponding toOfHeader.getVersion()
.- Returns:
- current value
-
getXid
public org.opendaylight.yangtools.yang.common.Uint32 getXid()
Return current value associated with the property corresponding toOfHeader.getXid()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<GetFeaturesOutput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setActionsV10
public GetFeaturesOutputBuilder setActionsV10(ActionTypeV10 value)
Set the property corresponding toFeaturesReply.getActionsV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setAuxiliaryId
public GetFeaturesOutputBuilder setAuxiliaryId(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toFeaturesReply.getAuxiliaryId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBuffers
public GetFeaturesOutputBuilder setBuffers(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFeaturesReply.getBuffers()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCapabilities
public GetFeaturesOutputBuilder setCapabilities(Capabilities value)
Set the property corresponding toFeaturesReply.getCapabilities()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCapabilitiesV10
public GetFeaturesOutputBuilder setCapabilitiesV10(CapabilitiesV10 value)
Set the property corresponding toFeaturesReply.getCapabilitiesV10()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDatapathId
public GetFeaturesOutputBuilder setDatapathId(org.opendaylight.yangtools.yang.common.Uint64 value)
Set the property corresponding toFeaturesReply.getDatapathId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setPhyPort
public GetFeaturesOutputBuilder setPhyPort(List<PhyPort> values)
Set the property corresponding toFeaturesReply.getPhyPort()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setReserved
public GetFeaturesOutputBuilder setReserved(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFeaturesReply.getReserved()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTables
public GetFeaturesOutputBuilder setTables(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toFeaturesReply.getTables()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setVersion
public GetFeaturesOutputBuilder setVersion(org.opendaylight.yangtools.yang.common.Uint8 value)
Set the property corresponding toOfHeader.getVersion()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setXid
public GetFeaturesOutputBuilder setXid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toOfHeader.getXid()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public GetFeaturesOutputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<GetFeaturesOutput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public GetFeaturesOutputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<GetFeaturesOutput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull GetFeaturesOutput build()
A newGetFeaturesOutput
instance.- Returns:
- A new
GetFeaturesOutput
instance.
-
-