Class FlowsStatisticsUpdateBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.flow.statistics.rev130819.FlowsStatisticsUpdateBuilder
-
@Generated("mdsal-binding-generator") public class FlowsStatisticsUpdateBuilder extends Object
Class that buildsFlowsStatisticsUpdate
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
FlowsStatisticsUpdate createFlowsStatisticsUpdate(int fooXyzzy, int barBaz) { return new FlowsStatisticsUpdateBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of FlowsStatisticsUpdate, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
FlowsStatisticsUpdate
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description FlowsStatisticsUpdateBuilder()
Construct an empty builder.FlowsStatisticsUpdateBuilder(FlowAndStatisticsMapList arg)
Construct a new builder initialized from specifiedFlowAndStatisticsMapList
.FlowsStatisticsUpdateBuilder(FlowsStatisticsUpdate base)
Construct a builder initialized with state from specifiedFlowsStatisticsUpdate
.FlowsStatisticsUpdateBuilder(TransactionAware arg)
Construct a new builder initialized from specifiedTransactionAware
.FlowsStatisticsUpdateBuilder(Node arg)
Construct a new builder initialized from specifiedNode
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description FlowsStatisticsUpdateBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowsStatisticsUpdate> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowsStatisticsUpdate>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull FlowsStatisticsUpdate
build()
A newFlowsStatisticsUpdate
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.List<FlowAndStatisticsMapList>
getFlowAndStatisticsMapList()
Return current value associated with the property corresponding toFlowAndStatisticsMapList.getFlowAndStatisticsMapList()
.NodeId
getId()
Return current value associated with the property corresponding toNode.getId()
.Boolean
getMoreReplies()
Return current value associated with the property corresponding toFlowsStatisticsUpdate.getMoreReplies()
.Map<NodeConnectorKey,NodeConnector>
getNodeConnector()
Return current value associated with the property corresponding toNode.getNodeConnector()
.TransactionId
getTransactionId()
Return current value associated with the property corresponding toTransactionAware.getTransactionId()
.FlowsStatisticsUpdateBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowsStatisticsUpdate>> augmentationType)
Remove an augmentation from this builder's product.FlowsStatisticsUpdateBuilder
setFlowAndStatisticsMapList(List<FlowAndStatisticsMapList> values)
Set the property corresponding toFlowAndStatisticsMapList.getFlowAndStatisticsMapList()
to the specified value.FlowsStatisticsUpdateBuilder
setId(NodeId value)
Set the property corresponding toNode.getId()
to the specified value.FlowsStatisticsUpdateBuilder
setMoreReplies(Boolean value)
Set the property corresponding toFlowsStatisticsUpdate.getMoreReplies()
to the specified value.FlowsStatisticsUpdateBuilder
setNodeConnector(Map<NodeConnectorKey,NodeConnector> values)
Set the property corresponding toNode.getNodeConnector()
to the specified value.FlowsStatisticsUpdateBuilder
setTransactionId(TransactionId value)
Set the property corresponding toTransactionAware.getTransactionId()
to the specified value.
-
-
-
Constructor Detail
-
FlowsStatisticsUpdateBuilder
public FlowsStatisticsUpdateBuilder()
Construct an empty builder.
-
FlowsStatisticsUpdateBuilder
public FlowsStatisticsUpdateBuilder(Node arg)
Construct a new builder initialized from specifiedNode
.- Parameters:
arg
- Node from which the builder should be initialized
-
FlowsStatisticsUpdateBuilder
public FlowsStatisticsUpdateBuilder(FlowAndStatisticsMapList arg)
Construct a new builder initialized from specifiedFlowAndStatisticsMapList
.- Parameters:
arg
- org.opendaylight.yang.gen.v1.urn.opendaylight.flow.statistics.rev130819.FlowAndStatisticsMapList from which the builder should be initialized
-
FlowsStatisticsUpdateBuilder
public FlowsStatisticsUpdateBuilder(TransactionAware arg)
Construct a new builder initialized from specifiedTransactionAware
.- Parameters:
arg
- TransactionAware from which the builder should be initialized
-
FlowsStatisticsUpdateBuilder
public FlowsStatisticsUpdateBuilder(FlowsStatisticsUpdate base)
Construct a builder initialized with state from specifiedFlowsStatisticsUpdate
.- Parameters:
base
- FlowsStatisticsUpdate from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getFlowAndStatisticsMapList
public List<FlowAndStatisticsMapList> getFlowAndStatisticsMapList()
Return current value associated with the property corresponding toFlowAndStatisticsMapList.getFlowAndStatisticsMapList()
.- Returns:
- current value
-
getId
public NodeId getId()
Return current value associated with the property corresponding toNode.getId()
.- Returns:
- current value
-
getMoreReplies
public Boolean getMoreReplies()
Return current value associated with the property corresponding toFlowsStatisticsUpdate.getMoreReplies()
.- Returns:
- current value
-
getNodeConnector
public Map<NodeConnectorKey,NodeConnector> getNodeConnector()
Return current value associated with the property corresponding toNode.getNodeConnector()
.- Returns:
- current value
-
getTransactionId
public TransactionId getTransactionId()
Return current value associated with the property corresponding toTransactionAware.getTransactionId()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowsStatisticsUpdate>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setFlowAndStatisticsMapList
public FlowsStatisticsUpdateBuilder setFlowAndStatisticsMapList(List<FlowAndStatisticsMapList> values)
Set the property corresponding toFlowAndStatisticsMapList.getFlowAndStatisticsMapList()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setId
public FlowsStatisticsUpdateBuilder setId(NodeId value)
Set the property corresponding toNode.getId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMoreReplies
public FlowsStatisticsUpdateBuilder setMoreReplies(Boolean value)
Set the property corresponding toFlowsStatisticsUpdate.getMoreReplies()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setNodeConnector
public FlowsStatisticsUpdateBuilder setNodeConnector(Map<NodeConnectorKey,NodeConnector> values)
Set the property corresponding toNode.getNodeConnector()
to the specified value.- Parameters:
values
- desired value- Returns:
- this builder
-
setTransactionId
public FlowsStatisticsUpdateBuilder setTransactionId(TransactionId value)
Set the property corresponding toTransactionAware.getTransactionId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public FlowsStatisticsUpdateBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowsStatisticsUpdate> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public FlowsStatisticsUpdateBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowsStatisticsUpdate>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull FlowsStatisticsUpdate build()
A newFlowsStatisticsUpdate
instance.- Returns:
- A new
FlowsStatisticsUpdate
instance.
-
-