Class FlatBatchRemoveMeterBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.flat.batch.service.rev160321.flat.batch.meter.crud._case.aug.flat.batch.remove.meter._case.FlatBatchRemoveMeterBuilder
-
@Generated("mdsal-binding-generator") public class FlatBatchRemoveMeterBuilder extends Object
Class that buildsFlatBatchRemoveMeter
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
FlatBatchRemoveMeter createFlatBatchRemoveMeter(int fooXyzzy, int barBaz) { return new FlatBatchRemoveMeterBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of FlatBatchRemoveMeter, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
FlatBatchRemoveMeter
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description FlatBatchRemoveMeterBuilder()
Construct an empty builder.FlatBatchRemoveMeterBuilder(FlatBatchRemoveMeter base)
Construct a builder initialized with state from specifiedFlatBatchRemoveMeter
.FlatBatchRemoveMeterBuilder(Meter arg)
Construct a new builder initialized from specifiedMeter
.FlatBatchRemoveMeterBuilder(BatchOrderGrouping arg)
Construct a new builder initialized from specifiedBatchOrderGrouping
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description FlatBatchRemoveMeterBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlatBatchRemoveMeter> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlatBatchRemoveMeter>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull FlatBatchRemoveMeter
build()
A newFlatBatchRemoveMeter
instance.void
fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument.Boolean
getBarrier()
Return current value associated with the property corresponding toMeter.getBarrier()
.org.opendaylight.yangtools.yang.common.Uint16
getBatchOrder()
Return current value associated with the property corresponding toBatchOrderGrouping.getBatchOrder()
.String
getContainerName()
Return current value associated with the property corresponding toMeter.getContainerName()
.MeterFlags
getFlags()
Return current value associated with the property corresponding toMeter.getFlags()
.MeterBandHeaders
getMeterBandHeaders()
Return current value associated with the property corresponding toMeter.getMeterBandHeaders()
.MeterId
getMeterId()
Return current value associated with the property corresponding toMeter.getMeterId()
.String
getMeterName()
Return current value associated with the property corresponding toMeter.getMeterName()
.FlatBatchRemoveMeterKey
key()
Return current value associated with the property corresponding toFlatBatchRemoveMeter.key()
.FlatBatchRemoveMeterBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlatBatchRemoveMeter>> augmentationType)
Remove an augmentation from this builder's product.FlatBatchRemoveMeterBuilder
setBarrier(Boolean value)
Set the property corresponding toMeter.getBarrier()
to the specified value.FlatBatchRemoveMeterBuilder
setBatchOrder(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toBatchOrderGrouping.getBatchOrder()
to the specified value.FlatBatchRemoveMeterBuilder
setContainerName(String value)
Set the property corresponding toMeter.getContainerName()
to the specified value.FlatBatchRemoveMeterBuilder
setFlags(MeterFlags value)
Set the property corresponding toMeter.getFlags()
to the specified value.FlatBatchRemoveMeterBuilder
setMeterBandHeaders(MeterBandHeaders value)
Set the property corresponding toMeter.getMeterBandHeaders()
to the specified value.FlatBatchRemoveMeterBuilder
setMeterId(MeterId value)
Set the property corresponding toMeter.getMeterId()
to the specified value.FlatBatchRemoveMeterBuilder
setMeterName(String value)
Set the property corresponding toMeter.getMeterName()
to the specified value.FlatBatchRemoveMeterBuilder
withKey(FlatBatchRemoveMeterKey key)
-
-
-
Constructor Detail
-
FlatBatchRemoveMeterBuilder
public FlatBatchRemoveMeterBuilder()
Construct an empty builder.
-
FlatBatchRemoveMeterBuilder
public FlatBatchRemoveMeterBuilder(BatchOrderGrouping arg)
Construct a new builder initialized from specifiedBatchOrderGrouping
.- Parameters:
arg
- BatchOrderGrouping from which the builder should be initialized
-
FlatBatchRemoveMeterBuilder
public FlatBatchRemoveMeterBuilder(Meter arg)
Construct a new builder initialized from specifiedMeter
.- Parameters:
arg
- Meter from which the builder should be initialized
-
FlatBatchRemoveMeterBuilder
public FlatBatchRemoveMeterBuilder(FlatBatchRemoveMeter base)
Construct a builder initialized with state from specifiedFlatBatchRemoveMeter
.- Parameters:
base
- FlatBatchRemoveMeter from which the builder should be initialized
-
-
Method Detail
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg)
Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
key
public FlatBatchRemoveMeterKey key()
Return current value associated with the property corresponding toFlatBatchRemoveMeter.key()
.- Returns:
- current value
-
getBarrier
public Boolean getBarrier()
Return current value associated with the property corresponding toMeter.getBarrier()
.- Returns:
- current value
-
getBatchOrder
public org.opendaylight.yangtools.yang.common.Uint16 getBatchOrder()
Return current value associated with the property corresponding toBatchOrderGrouping.getBatchOrder()
.- Returns:
- current value
-
getContainerName
public String getContainerName()
Return current value associated with the property corresponding toMeter.getContainerName()
.- Returns:
- current value
-
getFlags
public MeterFlags getFlags()
Return current value associated with the property corresponding toMeter.getFlags()
.- Returns:
- current value
-
getMeterBandHeaders
public MeterBandHeaders getMeterBandHeaders()
Return current value associated with the property corresponding toMeter.getMeterBandHeaders()
.- Returns:
- current value
-
getMeterId
public MeterId getMeterId()
Return current value associated with the property corresponding toMeter.getMeterId()
.- Returns:
- current value
-
getMeterName
public String getMeterName()
Return current value associated with the property corresponding toMeter.getMeterName()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlatBatchRemoveMeter>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
withKey
public FlatBatchRemoveMeterBuilder withKey(FlatBatchRemoveMeterKey key)
-
setBarrier
public FlatBatchRemoveMeterBuilder setBarrier(Boolean value)
Set the property corresponding toMeter.getBarrier()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setBatchOrder
public FlatBatchRemoveMeterBuilder setBatchOrder(org.opendaylight.yangtools.yang.common.Uint16 value)
Set the property corresponding toBatchOrderGrouping.getBatchOrder()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setContainerName
public FlatBatchRemoveMeterBuilder setContainerName(String value)
Set the property corresponding toMeter.getContainerName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlags
public FlatBatchRemoveMeterBuilder setFlags(MeterFlags value)
Set the property corresponding toMeter.getFlags()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterBandHeaders
public FlatBatchRemoveMeterBuilder setMeterBandHeaders(MeterBandHeaders value)
Set the property corresponding toMeter.getMeterBandHeaders()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterId
public FlatBatchRemoveMeterBuilder setMeterId(MeterId value)
Set the property corresponding toMeter.getMeterId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setMeterName
public FlatBatchRemoveMeterBuilder setMeterName(String value)
Set the property corresponding toMeter.getMeterName()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public FlatBatchRemoveMeterBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlatBatchRemoveMeter> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public FlatBatchRemoveMeterBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlatBatchRemoveMeter>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull FlatBatchRemoveMeter build()
A newFlatBatchRemoveMeter
instance.- Returns:
- A new
FlatBatchRemoveMeter
instance.
-
-