Class ReadFlowTestInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.bulk.flow.service.rev150608.ReadFlowTestInputBuilder
-
@Generated("mdsal-binding-generator") public class ReadFlowTestInputBuilder extends Object
Class that buildsReadFlowTestInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
ReadFlowTestInput createReadFlowTestInput(int fooXyzzy, int barBaz) { return new ReadFlowTestInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of ReadFlowTestInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
ReadFlowTestInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description ReadFlowTestInputBuilder()
Construct an empty builder.ReadFlowTestInputBuilder(ReadFlowTestInput base)
Construct a builder initialized with state from specifiedReadFlowTestInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description ReadFlowTestInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<ReadFlowTestInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<ReadFlowTestInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull ReadFlowTestInput
build()
A newReadFlowTestInput
instance.org.opendaylight.yangtools.yang.common.Uint32
getDpnCount()
Return current value associated with the property corresponding toReadFlowTestInput.getDpnCount()
.org.opendaylight.yangtools.yang.common.Uint32
getEndTableId()
Return current value associated with the property corresponding toReadFlowTestInput.getEndTableId()
.org.opendaylight.yangtools.yang.common.Uint32
getFlowsPerDpn()
Return current value associated with the property corresponding toReadFlowTestInput.getFlowsPerDpn()
.Boolean
getIsConfigDs()
Return current value associated with the property corresponding toReadFlowTestInput.getIsConfigDs()
.org.opendaylight.yangtools.yang.common.Uint32
getStartTableId()
Return current value associated with the property corresponding toReadFlowTestInput.getStartTableId()
.Boolean
getVerbose()
Return current value associated with the property corresponding toReadFlowTestInput.getVerbose()
.ReadFlowTestInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<ReadFlowTestInput>> augmentationType)
Remove an augmentation from this builder's product.ReadFlowTestInputBuilder
setDpnCount(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getDpnCount()
to the specified value.ReadFlowTestInputBuilder
setEndTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getEndTableId()
to the specified value.ReadFlowTestInputBuilder
setFlowsPerDpn(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getFlowsPerDpn()
to the specified value.ReadFlowTestInputBuilder
setIsConfigDs(Boolean value)
Set the property corresponding toReadFlowTestInput.getIsConfigDs()
to the specified value.ReadFlowTestInputBuilder
setStartTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getStartTableId()
to the specified value.ReadFlowTestInputBuilder
setVerbose(Boolean value)
Set the property corresponding toReadFlowTestInput.getVerbose()
to the specified value.
-
-
-
Constructor Detail
-
ReadFlowTestInputBuilder
public ReadFlowTestInputBuilder()
Construct an empty builder.
-
ReadFlowTestInputBuilder
public ReadFlowTestInputBuilder(ReadFlowTestInput base)
Construct a builder initialized with state from specifiedReadFlowTestInput
.- Parameters:
base
- ReadFlowTestInput from which the builder should be initialized
-
-
Method Detail
-
getDpnCount
public org.opendaylight.yangtools.yang.common.Uint32 getDpnCount()
Return current value associated with the property corresponding toReadFlowTestInput.getDpnCount()
.- Returns:
- current value
-
getEndTableId
public org.opendaylight.yangtools.yang.common.Uint32 getEndTableId()
Return current value associated with the property corresponding toReadFlowTestInput.getEndTableId()
.- Returns:
- current value
-
getFlowsPerDpn
public org.opendaylight.yangtools.yang.common.Uint32 getFlowsPerDpn()
Return current value associated with the property corresponding toReadFlowTestInput.getFlowsPerDpn()
.- Returns:
- current value
-
getIsConfigDs
public Boolean getIsConfigDs()
Return current value associated with the property corresponding toReadFlowTestInput.getIsConfigDs()
.- Returns:
- current value
-
getStartTableId
public org.opendaylight.yangtools.yang.common.Uint32 getStartTableId()
Return current value associated with the property corresponding toReadFlowTestInput.getStartTableId()
.- Returns:
- current value
-
getVerbose
public Boolean getVerbose()
Return current value associated with the property corresponding toReadFlowTestInput.getVerbose()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<ReadFlowTestInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setDpnCount
public ReadFlowTestInputBuilder setDpnCount(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getDpnCount()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setEndTableId
public ReadFlowTestInputBuilder setEndTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getEndTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowsPerDpn
public ReadFlowTestInputBuilder setFlowsPerDpn(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getFlowsPerDpn()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIsConfigDs
public ReadFlowTestInputBuilder setIsConfigDs(Boolean value)
Set the property corresponding toReadFlowTestInput.getIsConfigDs()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setStartTableId
public ReadFlowTestInputBuilder setStartTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toReadFlowTestInput.getStartTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setVerbose
public ReadFlowTestInputBuilder setVerbose(Boolean value)
Set the property corresponding toReadFlowTestInput.getVerbose()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public ReadFlowTestInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<ReadFlowTestInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public ReadFlowTestInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<ReadFlowTestInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull ReadFlowTestInput build()
A newReadFlowTestInput
instance.- Returns:
- A new
ReadFlowTestInput
instance.
-
-