Class FlowTestInputBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.bulk.flow.service.rev150608.FlowTestInputBuilder
-
@Generated("mdsal-binding-generator") public class FlowTestInputBuilder extends Object
Class that buildsFlowTestInput
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
FlowTestInput createFlowTestInput(int fooXyzzy, int barBaz) { return new FlowTestInputBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of FlowTestInput, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
FlowTestInput
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description FlowTestInputBuilder()
Construct an empty builder.FlowTestInputBuilder(FlowTestInput base)
Construct a builder initialized with state from specifiedFlowTestInput
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description FlowTestInputBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowTestInput> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowTestInput>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull FlowTestInput
build()
A newFlowTestInput
instance.org.opendaylight.yangtools.yang.common.Uint32
getBatchSize()
Return current value associated with the property corresponding toFlowTestInput.getBatchSize()
.Boolean
getCreateParents()
Return current value associated with the property corresponding toFlowTestInput.getCreateParents()
.org.opendaylight.yangtools.yang.common.Uint32
getDpnCount()
Return current value associated with the property corresponding toFlowTestInput.getDpnCount()
.org.opendaylight.yangtools.yang.common.Uint32
getEndTableId()
Return current value associated with the property corresponding toFlowTestInput.getEndTableId()
.org.opendaylight.yangtools.yang.common.Uint32
getFlowsPerDpn()
Return current value associated with the property corresponding toFlowTestInput.getFlowsPerDpn()
.Boolean
getIsAdd()
Return current value associated with the property corresponding toFlowTestInput.getIsAdd()
.Boolean
getSeq()
Return current value associated with the property corresponding toFlowTestInput.getSeq()
.org.opendaylight.yangtools.yang.common.Uint32
getSleepAfter()
Return current value associated with the property corresponding toFlowTestInput.getSleepAfter()
.org.opendaylight.yangtools.yang.common.Uint32
getSleepFor()
Return current value associated with the property corresponding toFlowTestInput.getSleepFor()
.org.opendaylight.yangtools.yang.common.Uint32
getStartTableId()
Return current value associated with the property corresponding toFlowTestInput.getStartTableId()
.Boolean
getTxChain()
Return current value associated with the property corresponding toFlowTestInput.getTxChain()
.FlowTestInputBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowTestInput>> augmentationType)
Remove an augmentation from this builder's product.FlowTestInputBuilder
setBatchSize(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getBatchSize()
to the specified value.FlowTestInputBuilder
setCreateParents(Boolean value)
Set the property corresponding toFlowTestInput.getCreateParents()
to the specified value.FlowTestInputBuilder
setDpnCount(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getDpnCount()
to the specified value.FlowTestInputBuilder
setEndTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getEndTableId()
to the specified value.FlowTestInputBuilder
setFlowsPerDpn(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getFlowsPerDpn()
to the specified value.FlowTestInputBuilder
setIsAdd(Boolean value)
Set the property corresponding toFlowTestInput.getIsAdd()
to the specified value.FlowTestInputBuilder
setSeq(Boolean value)
Set the property corresponding toFlowTestInput.getSeq()
to the specified value.FlowTestInputBuilder
setSleepAfter(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getSleepAfter()
to the specified value.FlowTestInputBuilder
setSleepFor(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getSleepFor()
to the specified value.FlowTestInputBuilder
setStartTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getStartTableId()
to the specified value.FlowTestInputBuilder
setTxChain(Boolean value)
Set the property corresponding toFlowTestInput.getTxChain()
to the specified value.
-
-
-
Constructor Detail
-
FlowTestInputBuilder
public FlowTestInputBuilder()
Construct an empty builder.
-
FlowTestInputBuilder
public FlowTestInputBuilder(FlowTestInput base)
Construct a builder initialized with state from specifiedFlowTestInput
.- Parameters:
base
- FlowTestInput from which the builder should be initialized
-
-
Method Detail
-
getBatchSize
public org.opendaylight.yangtools.yang.common.Uint32 getBatchSize()
Return current value associated with the property corresponding toFlowTestInput.getBatchSize()
.- Returns:
- current value
-
getCreateParents
public Boolean getCreateParents()
Return current value associated with the property corresponding toFlowTestInput.getCreateParents()
.- Returns:
- current value
-
getDpnCount
public org.opendaylight.yangtools.yang.common.Uint32 getDpnCount()
Return current value associated with the property corresponding toFlowTestInput.getDpnCount()
.- Returns:
- current value
-
getEndTableId
public org.opendaylight.yangtools.yang.common.Uint32 getEndTableId()
Return current value associated with the property corresponding toFlowTestInput.getEndTableId()
.- Returns:
- current value
-
getFlowsPerDpn
public org.opendaylight.yangtools.yang.common.Uint32 getFlowsPerDpn()
Return current value associated with the property corresponding toFlowTestInput.getFlowsPerDpn()
.- Returns:
- current value
-
getIsAdd
public Boolean getIsAdd()
Return current value associated with the property corresponding toFlowTestInput.getIsAdd()
.- Returns:
- current value
-
getSeq
public Boolean getSeq()
Return current value associated with the property corresponding toFlowTestInput.getSeq()
.- Returns:
- current value
-
getSleepAfter
public org.opendaylight.yangtools.yang.common.Uint32 getSleepAfter()
Return current value associated with the property corresponding toFlowTestInput.getSleepAfter()
.- Returns:
- current value
-
getSleepFor
public org.opendaylight.yangtools.yang.common.Uint32 getSleepFor()
Return current value associated with the property corresponding toFlowTestInput.getSleepFor()
.- Returns:
- current value
-
getStartTableId
public org.opendaylight.yangtools.yang.common.Uint32 getStartTableId()
Return current value associated with the property corresponding toFlowTestInput.getStartTableId()
.- Returns:
- current value
-
getTxChain
public Boolean getTxChain()
Return current value associated with the property corresponding toFlowTestInput.getTxChain()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowTestInput>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setBatchSize
public FlowTestInputBuilder setBatchSize(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getBatchSize()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setCreateParents
public FlowTestInputBuilder setCreateParents(Boolean value)
Set the property corresponding toFlowTestInput.getCreateParents()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setDpnCount
public FlowTestInputBuilder setDpnCount(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getDpnCount()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setEndTableId
public FlowTestInputBuilder setEndTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getEndTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setFlowsPerDpn
public FlowTestInputBuilder setFlowsPerDpn(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getFlowsPerDpn()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIsAdd
public FlowTestInputBuilder setIsAdd(Boolean value)
Set the property corresponding toFlowTestInput.getIsAdd()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSeq
public FlowTestInputBuilder setSeq(Boolean value)
Set the property corresponding toFlowTestInput.getSeq()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSleepAfter
public FlowTestInputBuilder setSleepAfter(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getSleepAfter()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSleepFor
public FlowTestInputBuilder setSleepFor(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getSleepFor()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setStartTableId
public FlowTestInputBuilder setStartTableId(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toFlowTestInput.getStartTableId()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setTxChain
public FlowTestInputBuilder setTxChain(Boolean value)
Set the property corresponding toFlowTestInput.getTxChain()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public FlowTestInputBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<FlowTestInput> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public FlowTestInputBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<FlowTestInput>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull FlowTestInput build()
A newFlowTestInput
instance.- Returns:
- A new
FlowTestInput
instance.
-
-