Package org.opendaylight.yang.gen.v1.urn.opendaylight.model.match.types.rev131026.match.layer._3.match
Class Ipv6MatchBuilder
java.lang.Object
org.opendaylight.yang.gen.v1.urn.opendaylight.model.match.types.rev131026.match.layer._3.match.Ipv6MatchBuilder
Class that builds
Ipv6Match
instances. Overall design of the class is that of a
fluent interface, where method chaining is used.
In general, this class is supposed to be used like this template:
Ipv6Match createIpv6Match(int fooXyzzy, int barBaz) {
return new Ipv6MatchBuilder()
.setFoo(new FooBuilder().setXyzzy(fooXyzzy).build())
.setBar(new BarBuilder().setBaz(barBaz).build())
.build();
}
This pattern is supported by the immutable nature of Ipv6Match, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
-
Constructor Summary
ConstructorDescriptionConstruct an empty builder.Construct a new builder initialized from specifiedIpv6MatchFields
.Ipv6MatchBuilder
(Ipv6Match base) Construct a builder initialized with state from specifiedIpv6Match
. -
Method Summary
Modifier and TypeMethodDescriptionaddAugmentation
(org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6Match> augmentation) Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6Match>>
E$$augmentation
(Class<E$$> augmentationType) Return the specified augmentation, if it is present in this builder.@NonNull Ipv6Match
build()
A newIpv6Match
instance.void
fieldsFrom
(org.opendaylight.yangtools.yang.binding.DataObject arg) Set fields from given grouping argument.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6Destination()
.Return current value associated with the property corresponding toIpv6MatchFields.getIpv6ExtHeader()
.Return current value associated with the property corresponding toIpv6MatchFields.getIpv6Label()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6NdSll()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6NdTarget()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6NdTll()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6Source()
.removeAugmentation
(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6Match>> augmentationType) Remove an augmentation from this builder's product.setIpv6Destination
(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix value) Set the property corresponding toIpv6MatchFields.getIpv6Destination()
to the specified value.setIpv6ExtHeader
(Ipv6ExtHeader value) Set the property corresponding toIpv6MatchFields.getIpv6ExtHeader()
to the specified value.setIpv6Label
(Ipv6Label value) Set the property corresponding toIpv6MatchFields.getIpv6Label()
to the specified value.setIpv6NdSll
(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value) Set the property corresponding toIpv6MatchFields.getIpv6NdSll()
to the specified value.setIpv6NdTarget
(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address value) Set the property corresponding toIpv6MatchFields.getIpv6NdTarget()
to the specified value.setIpv6NdTll
(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value) Set the property corresponding toIpv6MatchFields.getIpv6NdTll()
to the specified value.setIpv6Source
(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix value) Set the property corresponding toIpv6MatchFields.getIpv6Source()
to the specified value.
-
Constructor Details
-
Ipv6MatchBuilder
public Ipv6MatchBuilder()Construct an empty builder. -
Ipv6MatchBuilder
Construct a new builder initialized from specifiedIpv6MatchFields
.- Parameters:
arg
- Ipv6MatchFields from which the builder should be initialized
-
Ipv6MatchBuilder
Construct a builder initialized with state from specifiedIpv6Match
.- Parameters:
base
- Ipv6Match from which the builder should be initialized
-
-
Method Details
-
fieldsFrom
public void fieldsFrom(org.opendaylight.yangtools.yang.binding.DataObject arg) Set fields from given grouping argument. Valid argument is instance of one of following types:- Parameters:
arg
- grouping object- Throws:
IllegalArgumentException
- if given argument is none of valid types or has property with incompatible value
-
getIpv6Destination
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix getIpv6Destination()Return current value associated with the property corresponding toIpv6MatchFields.getIpv6Destination()
.- Returns:
- current value
-
getIpv6ExtHeader
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6ExtHeader()
.- Returns:
- current value
-
getIpv6Label
Return current value associated with the property corresponding toIpv6MatchFields.getIpv6Label()
.- Returns:
- current value
-
getIpv6NdSll
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getIpv6NdSll()Return current value associated with the property corresponding toIpv6MatchFields.getIpv6NdSll()
.- Returns:
- current value
-
getIpv6NdTarget
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address getIpv6NdTarget()Return current value associated with the property corresponding toIpv6MatchFields.getIpv6NdTarget()
.- Returns:
- current value
-
getIpv6NdTll
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress getIpv6NdTll()Return current value associated with the property corresponding toIpv6MatchFields.getIpv6NdTll()
.- Returns:
- current value
-
getIpv6Source
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix getIpv6Source()Return current value associated with the property corresponding toIpv6MatchFields.getIpv6Source()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6Match>> E$$ augmentation(Class<E$$> augmentationType) Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setIpv6Destination
public Ipv6MatchBuilder setIpv6Destination(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix value) Set the property corresponding toIpv6MatchFields.getIpv6Destination()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6ExtHeader
Set the property corresponding toIpv6MatchFields.getIpv6ExtHeader()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6Label
Set the property corresponding toIpv6MatchFields.getIpv6Label()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6NdSll
public Ipv6MatchBuilder setIpv6NdSll(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value) Set the property corresponding toIpv6MatchFields.getIpv6NdSll()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6NdTarget
public Ipv6MatchBuilder setIpv6NdTarget(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address value) Set the property corresponding toIpv6MatchFields.getIpv6NdTarget()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6NdTll
public Ipv6MatchBuilder setIpv6NdTll(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.yang.types.rev130715.MacAddress value) Set the property corresponding toIpv6MatchFields.getIpv6NdTll()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6Source
public Ipv6MatchBuilder setIpv6Source(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Prefix value) Set the property corresponding toIpv6MatchFields.getIpv6Source()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public Ipv6MatchBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6Match> augmentation) Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public Ipv6MatchBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<Ipv6Match>> augmentationType) Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
A newIpv6Match
instance.- Returns:
- A new
Ipv6Match
instance.
-