Class PathDescriptionBuilder
- java.lang.Object
-
- org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.path.computation.rev220324.path.descriptions.PathDescriptionBuilder
-
@Generated("mdsal-binding-generator") public class PathDescriptionBuilder extends Object
Class that buildsPathDescription
instances. Overall design of the class is that of a fluent interface, where method chaining is used.In general, this class is supposed to be used like this template:
PathDescription createPathDescription(int fooXyzzy, int barBaz) { return new PathDescriptionBuilder() .setFoo(new FooBuilder().setXyzzy(fooXyzzy).build()) .setBar(new BarBuilder().setBaz(barBaz).build()) .build(); }
This pattern is supported by the immutable nature of PathDescription, as instances can be freely passed around without worrying about synchronization issues.
As a side note: method chaining results in:
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
build()
, which is then returned from the method - better understanding by humans, as the scope of mutable state (the builder) is kept to a minimum and is very localized
- better optimization opportunities, as the object scope is minimized in terms of invocation (rather than method) stack, making escape analysis a lot easier. Given enough compiler (JIT/AOT) prowess, the cost of th builder object can be completely eliminated
- See Also:
PathDescription
- very efficient Java bytecode, as the method invocation result, in this case the Builder reference, is
on the stack, so further method invocations just need to fill method arguments for the next method
invocation, which is terminated by
-
-
Constructor Summary
Constructors Constructor Description PathDescriptionBuilder()
Construct an empty builder.PathDescriptionBuilder(PathDescription base)
Construct a builder initialized with state from specifiedPathDescription
.
-
Method Summary
All Methods Instance Methods Concrete Methods Modifier and Type Method Description PathDescriptionBuilder
addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PathDescription> augmentation)
Add an augmentation to this builder's product.<E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PathDescription>>
E$$augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.@NonNull PathDescription
build()
A newPathDescription
instance.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address
getIpv4()
Return current value associated with the property corresponding toPathDescription.getIpv4()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address
getIpv6()
Return current value associated with the property corresponding toPathDescription.getIpv6()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address
getRemoteIpv4()
Return current value associated with the property corresponding toPathDescription.getRemoteIpv4()
.org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address
getRemoteIpv6()
Return current value associated with the property corresponding toPathDescription.getRemoteIpv6()
.org.opendaylight.yangtools.yang.common.Uint32
getSid()
Return current value associated with the property corresponding toPathDescription.getSid()
.PathDescriptionBuilder
removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PathDescription>> augmentationType)
Remove an augmentation from this builder's product.PathDescriptionBuilder
setIpv4(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address value)
Set the property corresponding toPathDescription.getIpv4()
to the specified value.PathDescriptionBuilder
setIpv6(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address value)
Set the property corresponding toPathDescription.getIpv6()
to the specified value.PathDescriptionBuilder
setRemoteIpv4(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address value)
Set the property corresponding toPathDescription.getRemoteIpv4()
to the specified value.PathDescriptionBuilder
setRemoteIpv6(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address value)
Set the property corresponding toPathDescription.getRemoteIpv6()
to the specified value.PathDescriptionBuilder
setSid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPathDescription.getSid()
to the specified value.
-
-
-
Constructor Detail
-
PathDescriptionBuilder
public PathDescriptionBuilder()
Construct an empty builder.
-
PathDescriptionBuilder
public PathDescriptionBuilder(PathDescription base)
Construct a builder initialized with state from specifiedPathDescription
.- Parameters:
base
- PathDescription from which the builder should be initialized
-
-
Method Detail
-
getIpv4
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address getIpv4()
Return current value associated with the property corresponding toPathDescription.getIpv4()
.- Returns:
- current value
-
getIpv6
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address getIpv6()
Return current value associated with the property corresponding toPathDescription.getIpv6()
.- Returns:
- current value
-
getRemoteIpv4
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address getRemoteIpv4()
Return current value associated with the property corresponding toPathDescription.getRemoteIpv4()
.- Returns:
- current value
-
getRemoteIpv6
public org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address getRemoteIpv6()
Return current value associated with the property corresponding toPathDescription.getRemoteIpv6()
.- Returns:
- current value
-
getSid
public org.opendaylight.yangtools.yang.common.Uint32 getSid()
Return current value associated with the property corresponding toPathDescription.getSid()
.- Returns:
- current value
-
augmentation
public <E$$ extends org.opendaylight.yangtools.yang.binding.Augmentation<PathDescription>> E$$ augmentation(Class<E$$> augmentationType)
Return the specified augmentation, if it is present in this builder.- Type Parameters:
E$$
- augmentation type- Parameters:
augmentationType
- augmentation type class- Returns:
- Augmentation object from this builder, or
null
if not present - Throws:
NullPointerException
- ifaugmentType
isnull
-
setIpv4
public PathDescriptionBuilder setIpv4(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address value)
Set the property corresponding toPathDescription.getIpv4()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setIpv6
public PathDescriptionBuilder setIpv6(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address value)
Set the property corresponding toPathDescription.getIpv6()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRemoteIpv4
public PathDescriptionBuilder setRemoteIpv4(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv4Address value)
Set the property corresponding toPathDescription.getRemoteIpv4()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setRemoteIpv6
public PathDescriptionBuilder setRemoteIpv6(org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.Ipv6Address value)
Set the property corresponding toPathDescription.getRemoteIpv6()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
setSid
public PathDescriptionBuilder setSid(org.opendaylight.yangtools.yang.common.Uint32 value)
Set the property corresponding toPathDescription.getSid()
to the specified value.- Parameters:
value
- desired value- Returns:
- this builder
-
addAugmentation
public PathDescriptionBuilder addAugmentation(org.opendaylight.yangtools.yang.binding.Augmentation<PathDescription> augmentation)
Add an augmentation to this builder's product.- Parameters:
augmentation
- augmentation to be added- Returns:
- this builder
- Throws:
NullPointerException
- ifaugmentation
is null
-
removeAugmentation
public PathDescriptionBuilder removeAugmentation(Class<? extends org.opendaylight.yangtools.yang.binding.Augmentation<PathDescription>> augmentationType)
Remove an augmentation from this builder's product. If this builder does not track such an augmentation type, this method does nothing.- Parameters:
augmentationType
- augmentation type to be removed- Returns:
- this builder
-
build
public @NonNull PathDescription build()
A newPathDescription
instance.- Returns:
- A new
PathDescription
instance.
-
-